linux-kernel - [PATCH 4.19 16/35] mmc: vub300: fix control-message timeouts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211101082455.352338483@linuxfoundation.org>
Date:   Mon,  1 Nov 2021 10:17:28 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Johan Hovold <johan@...nel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>
Subject: [PATCH 4.19 16/35] mmc: vub300: fix control-message timeouts

From: Johan Hovold <johan@...nel.org>

commit 8c8171929116cc23f74743d99251eedadf62341a upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@...r.kernel.org      # 3.0
Signed-off-by: Johan Hovold <johan@...nel.org>
Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/mmc/host/vub300.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -579,7 +579,7 @@ static void check_vub300_port_status(str
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (sizeof(vub300->system_port_status) == retval)
 		new_system_port_status(vub300);
 }
@@ -1244,7 +1244,7 @@ static void __download_offload_pseudocod
 						SET_INTERRUPT_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0)
 				goto copy_error_message;
@@ -1287,7 +1287,7 @@ static void __download_offload_pseudocod
 						SET_TRANSFER_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0)
 				goto copy_error_message;
@@ -1994,7 +1994,7 @@ static void __set_clock_speed(struct vub
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_CLOCK_SPEED,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x00, 0x00, buf, buf_array_size, HZ);
+				0x00, 0x00, buf, buf_array_size, 1000);
 	if (retval != 8) {
 		dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
 			" %dkHz failed with retval=%d\n", kHzClock, retval);
@@ -2016,14 +2016,14 @@ static void vub300_mmc_set_ios(struct mm
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0000, 0x0000, NULL, 0, HZ);
+				0x0000, 0x0000, NULL, 0, 1000);
 		/* must wait for the VUB300 u-proc to boot up */
 		msleep(600);
 	} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0001, 0x0000, NULL, 0, HZ);
+				0x0001, 0x0000, NULL, 0, 1000);
 		msleep(600);
 		vub300->card_powered = 1;
 	} else if (ios->power_mode == MMC_POWER_ON) {
@@ -2285,14 +2285,14 @@ static int vub300_probe(struct usb_inter
 				GET_HC_INF0,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->hc_info,
-				sizeof(vub300->hc_info), HZ);
+				sizeof(vub300->hc_info), 1000);
 	if (retval < 0)
 		goto error5;
 	retval =
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_ROM_WAIT_STATES,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+				firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
 	if (retval < 0)
 		goto error5;
 	dev_info(&vub300->udev->dev,
@@ -2307,7 +2307,7 @@ static int vub300_probe(struct usb_inter
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (retval < 0) {
 		goto error4;
 	} else if (sizeof(vub300->system_port_status) == retval) {