Message-ID: <20211102222757.ny4c7gdnyxm3gorw@soft-dev3-1.localhost>
Date:   Tue, 2 Nov 2021 23:27:57 +0100
From:   Horatiu Vultur <horatiu.vultur@...rochip.com>
To:     Rob Herring <robh@...nel.org>
CC:     Peter Rosin <peda@...ntia.se>, <linux-i2c@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/2] dt-bindings: i2c-mux: Add property for settle time

The 11/02/2021 13:37, Rob Herring wrote:

Hi Rob,

> 
> On Mon, Nov 01, 2021 at 10:32:01PM +0100, Horatiu Vultur wrote:
> > The 11/01/2021 15:32, Peter Rosin wrote:
> >
> > Hi Peter,
> >
> > >
> > > On 2021-11-01 13:25, Horatiu Vultur wrote:
> > > > Some HW requires some time for the signals to settle after the muxing is
> > > > changed. Allow this time to be specified in device tree.
> > > >
> > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
> > > > ---
> > > >  Documentation/devicetree/bindings/i2c/i2c-mux.yaml | 6 ++++++
> > > >  1 file changed, 6 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > > > index 24cac36037f5..4628ff6340c1 100644
> > > > --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > > > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > > > @@ -29,6 +29,12 @@ properties:
> > > >    '#size-cells':
> > > >      const: 0
> > > >
> > > > +  settle-time-us:
> > > > +    default: 0
> > > > +    description:
> > > > +      The time required for the signals to settle. Currently only the
> > > > +      i2c-mux-gpmux driver supports this optional binding.
> > >
> > > The information about how i2c-mux-gpmux is special is bound to go stale,
> > > and I don't think we should mention such specific details in the binding.
> > > What I meant was a generic warnings about optional bindings perhaps not
> > > being supported by all drivers, along the lines of this from i2c.txt:
> > >
> > > "These properties may not be supported by all drivers. However, if a driver
> > >  wants to support one of the below features, it should adapt these bindings."
> > >
> > > However, I now notice that this sentence makes no sense. It looks like it
> > > should be s/adapt/adopt/.
> > >
> > > And, in the i2c-mux.yaml case it can simply say "Optional properties"
> > > instead of "These properites" (which refers to a subset of properties
> > > immediately below the text) since with a yaml binding it is always
> > > clear which properties are optional and which are required. Lastly, I
> > > guess this warning belongs in the description.
> > >
> > > > +
> > > >  patternProperties:
> > > >    '^i2c@[0-9a-f]+$':
> > > >      $ref: /schemas/i2c/i2c-controller.yaml
> > > >
> > >
> > > Since this is the first optional property, you now need to specify what
> > > properties are required, which is everything but settle-time-us. If you
> > > don't, all properties are required. Which is not what we want...
> > >
> > > Something like this should do it, I think:
> > >
> > > required:
> > >   - compatible
> > >   - '#address-cells'
> > >   - '#size-cells'
> >
> > Thanks for a detail explanation but I am still struggling with these
> > bindings. Were you thinking to have something like this?
> >
> > ---
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > index 24cac36037f5..c9fde1bb0fea 100644
> > --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > @@ -19,6 +19,9 @@ description: |+
> >    populating the i2c child busses.  If an 'i2c-mux' subnode is present, only
> >    subnodes of this will be considered as i2c child busses.
> >
> > +  Optional properties may not be supported by all drivers. However, if a driver
> > +  wants to support one of the below features, it should adopt these bindings.
> > +
> >  properties:
> >    $nodename:
> >      pattern: '^(i2c-?)?mux'
> > @@ -29,6 +32,11 @@ properties:
> >    '#size-cells':
> >      const: 0
> >
> > +  settle-time-us:
> > +    default: 0
> > +    description:
> > +      The time required for the signals to settle.
> > +
> >  patternProperties:
> >    '^i2c@[0-9a-f]+$':
> >      $ref: /schemas/i2c/i2c-controller.yaml
> > @@ -41,6 +49,11 @@ patternProperties:
> >
> >  additionalProperties: true
> >
> > +required:
> > +  - compatible
> 
> compatible should not be required here.
> 
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +
> >  examples:
> >    - |
> >      /*
> > ---
> >
> > If I have this then my problem is with the required properties because then I
> > start to get new warnings once I run:
> >
> > make ARCH=arm CROSS_COMPILE=arm-linux- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> >
> > For example, one of new the warnings is this:
> >
> > /home/hvultur/linux/arch/arm/boot/dts/am335x-icev2.dt.yaml: mux-mii-hog: 'compatible' is a required property
> >       From schema: /home/hvultur/linux/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > /home/hvultur/linux/arch/arm/boot/dts/am335x-icev2.dt.yaml: mux-mii-hog: '#address-cells' is a required property
> >       From schema: /home/hvultur/linux/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > /home/hvultur/linux/arch/arm/boot/dts/am335x-icev2.dt.yaml: mux-mii-hog: '#size-cells' is a required property
> >       From schema: /home/hvultur/linux/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> 
> This is because of the $nodename pattern being pretty lax and matches
> on mux-mii-hog by mistake. We have 2 options. Change the nodename
> pattern to '^(i2c-?)?mux(@.*)?$' or add 'select: false'. The former
> would still match on 'mux' or 'mux@.*' which might still have problems.
> For the latter, we just need to make sure all the i2c-mux schemas have a
> $ref to this schema. Also, with that change we'd stop checking 'i2c-mux'
> nodes that don't yet have a specific schema. That said, I do lean toward
> the latter option.

>From what I can see there are only two i2c-mux schemas and both of them
have a $ref to this schema [1][2]

[1] https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml#L33
[2] https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml#L16

> 
> Rob

-- 
/Horatiu

Powered by blists - more mailing lists