| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211102225701.98944-8-Mr.Bossman075@gmail.com>
Date: Tue, 2 Nov 2021 18:56:55 -0400
From: Jesse Taube <mr.bossman075@...il.com>
To: linux-imx@....com
Cc: mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, ulf.hansson@...aro.org, aisheng.dong@....com,
stefan@...er.ch, linus.walleij@...aro.org,
gregkh@...uxfoundation.org, arnd@...db.de, olof@...om.net,
soc@...nel.org, linux@...linux.org.uk, abel.vesa@....com,
adrian.hunter@...el.com, jirislaby@...nel.org,
giulio.benetti@...ettiengineering.com,
nobuhiro1.iwamatsu@...hiba.co.jp, Mr.Bossman075@...il.com,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-serial@...r.kernel.org, Jesse Taube <mr.bossman075@...il.com>
Subject: [PATCH v2 07/13] clk: imx: Add initial support for i.MXRT clock driver
From: Jesse Taube <mr.bossman075@...il.com>
This patch adds initial clock driver support for the i.MXRT series.
Signed-off-by: Jesse Taube <Mr.Bossman075@...il.com>
Suggested-by: Giulio Benetti <giulio.benetti@...ettiengineering.com>
---
V1->V2:
* Kconfig: Add new line
* clk-imxrt.c: Remove unused const
* clk-imxrt.c: Remove set parents
* clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
---
drivers/clk/imx/Kconfig | 4 +
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-imxrt.c | 149 ++++++++++++++++++++++++++++++++++++
3 files changed, 154 insertions(+)
create mode 100644 drivers/clk/imx/clk-imxrt.c
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 47d9ec3abd2f..f83ba5fe8cd3 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -98,3 +98,7 @@ config CLK_IMX8QXP
select MXC_CLK_SCU
help
Build the driver for IMX8QXP SCU based clocks.
+
+config CLK_IMXRT
+ def_bool SOC_IMXRT
+ select MXC_CLK
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index c24a2acbfa56..6a3fee6cd9af 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
obj-$(CONFIG_CLK_IMX7D) += clk-imx7d.o
obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
obj-$(CONFIG_CLK_VF610) += clk-vf610.o
+obj-$(CONFIG_CLK_IMXRT) += clk-imxrt.o
diff --git a/drivers/clk/imx/clk-imxrt.c b/drivers/clk/imx/clk-imxrt.c
new file mode 100644
index 000000000000..8e235925cdb7
--- /dev/null
+++ b/drivers/clk/imx/clk-imxrt.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2021
+ * Author(s):
+ * Jesse Taube <Mr.Bossman075@...il.com>
+ * Giulio Benetti <giulio.benetti@...ettiengineering.com>
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sizes.h>
+#include <soc/imx/revision.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+
+#include "clk.h"
+#define ANATOP_BASE_ADDR 0x400d8000
+
+static const char * const pll_ref_sels[] = {"osc", "dummy", };
+static const char * const per_sels[] = {"ipg_pdof", "osc", };
+static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
+static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
+static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
+static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
+static const char *const pre_periph_sels[] = {
+ "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
+static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
+static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
+static const char *const lcdif_sels[] = {
+ "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
+ "pll2_pfd1_594m", "pll3_pfd1_664_62m", };
+
+static struct clk *clk[IMXRT1050_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static void __init imxrt_clocks_common_init(void __iomem *base)
+{
+ /* Anatop clocks */
+ clk[IMXRT1050_CLK_DUMMY] = imx_clk_fixed("dummy", 0UL);
+
+ clk[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_mux("pll1_arm_ref_sel",
+ base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+ clk[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_mux("pll2_sys_ref_sel",
+ base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+ clk[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_mux("pll3_usb_otg_ref_sel",
+ base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+ clk[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_mux("pll5_video_ref_sel",
+ base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+
+ clk[IMXRT1050_CLK_PLL1_ARM] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm",
+ "pll1_arm_ref_sel", base + 0x0, 0x7f);
+ clk[IMXRT1050_CLK_PLL2_SYS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
+ "pll2_sys_ref_sel", base + 0x30, 0x1);
+ clk[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
+ "pll3_usb_otg_ref_sel", base + 0x10, 0x1);
+ clk[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video",
+ "pll5_video_ref_sel", base + 0xa0, 0x7f);
+
+ /* PLL bypass out */
+ clk[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x0, 16, 1,
+ pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1,
+ pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1,
+ pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
+ pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+
+ clk[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_divider("video_post_div_sel",
+ "pll5_video", base + 0xa0, 19, 2);
+ clk[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_divider("video_div",
+ "video_post_div_sel", base + 0x170, 30, 2);
+
+ clk[IMXRT1050_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+
+ clk[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
+ clk[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
+ clk[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
+ clk[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
+}
+
+static void __init imxrt1050_clocks_init(struct device_node *np)
+{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
+ struct device_node *anp;
+
+ clk[IMXRT1050_CLK_OSC] = of_clk_get_by_name(np, "osc");
+
+ anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
+ pll_base = of_iomap(anp, 0);
+ WARN_ON(!pll_base);
+ imxrt_clocks_common_init(pll_base);
+ /* CCM clocks */
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ clk[IMXRT1050_CLK_ARM_PODF] = imx_clk_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
+ clk[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
+ pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
+ clk[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_mux("periph_sel", ccm_base + 0x14, 25, 1,
+ periph_sels, ARRAY_SIZE(periph_sels));
+ clk[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
+ usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
+ usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[IMXRT1050_CLK_LPUART_SEL] = imx_clk_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
+ lpuart_sels, ARRAY_SIZE(lpuart_sels));
+ clk[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
+ lcdif_sels, ARRAY_SIZE(lcdif_sels));
+ clk[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_mux("per_sel", ccm_base + 0x1C, 6, 1,
+ per_sels, ARRAY_SIZE(per_sels));
+
+ clk[IMXRT1050_CLK_AHB_PODF] = imx_clk_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
+ clk[IMXRT1050_CLK_IPG_PDOF] = imx_clk_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
+ clk[IMXRT1050_CLK_PER_PDOF] = imx_clk_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
+
+ clk[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
+ clk[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
+ clk[IMXRT1050_CLK_LPUART_PODF] = imx_clk_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
+ clk[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
+ clk[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
+
+ clk[IMXRT1050_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
+ clk[IMXRT1050_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
+ clk[IMXRT1050_CLK_LPUART1] = imx_clk_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
+ clk[IMXRT1050_CLK_LCDIF_APB] = imx_clk_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
+ clk[IMXRT1050_CLK_DMA] = imx_clk_gate("dma", "ipg", ccm_base + 0x7C, 6);
+ clk[IMXRT1050_CLK_DMA_MUX] = imx_clk_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ clk_prepare_enable(clk[IMXRT1050_CLK_PLL1_ARM]);
+ clk_prepare_enable(clk[IMXRT1050_CLK_PLL2_SYS]);
+ clk_prepare_enable(clk[IMXRT1050_CLK_PLL3_USB_OTG]);
+ clk_prepare_enable(clk[IMXRT1050_CLK_PLL3_PFD1_664_62M]);
+ clk_prepare_enable(clk[IMXRT1050_CLK_PLL2_PFD2_396M]);
+}
+CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);
--
2.33.1
Powered by blists - more mailing lists