| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <49c5e91a-8e02-2a76-db5d-5f15df3c485f@intel.com>
Date: Tue, 2 Nov 2021 08:24:08 +0200
From: Sasha Neftin <sasha.neftin@...el.com>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>
CC: Jesse Brandeburg <jesse.brandeburg@...el.com>,
"Nguyen, Anthony L" <anthony.l.nguyen@...el.com>,
AceLan Kao <acelan.kao@...onical.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
"Dima Ruinskiy" <dima.ruinskiy@...el.com>,
"moderated list:INTEL ETHERNET DRIVERS"
<intel-wired-lan@...ts.osuosl.org>,
Linux Netdev List <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
"Kraus, NechamaX" <nechamax.kraus@...ux.intel.com>,
"Fuxbrumer, Devora" <devora.fuxbrumer@...el.com>,
"Avivi, Amir" <amir.avivi@...el.com>,
"Neftin, Sasha" <sasha.neftin@...el.com>
Subject: Re: [PATCH v2] e1000e: Add a delay to let ME unconfigure s0ix when
DPG_EXIT_DONE is already flagged
On 11/2/2021 05:27, Kai-Heng Feng wrote:
> On Fri, Oct 29, 2021 at 5:14 PM Sasha Neftin <sasha.neftin@...el.com> wrote:
>>
>> On 10/27/2021 01:50, Kai-Heng Feng wrote:
>>> On Tue, Oct 26, 2021 at 4:48 PM Sasha Neftin <sasha.neftin@...el.com> wrote:
>>>>
>>>> On 10/26/2021 09:51, Kai-Heng Feng wrote:
>>>>> On some ADL platforms, DPG_EXIT_DONE is always flagged so e1000e resume
>>>>> polling logic doesn't wait until ME really unconfigures s0ix.
>>>>>
>>>>> So check DPG_EXIT_DONE before issuing EXIT_DPG, and if it's already
>>>>> flagged, wait for 1 second to let ME unconfigure s0ix.
>>>>>
>>>>> Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
>>>>> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
>>>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
>>>>> ---
>>>>> v2:
>>>>> Add missing "Fixes:" tag
>>>>>
>>>>> drivers/net/ethernet/intel/e1000e/netdev.c | 7 +++++++
>>>>> 1 file changed, 7 insertions(+)
>>>>>
>>>>> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>> index 44e2dc8328a22..cd81ba00a6bc9 100644
>>>>> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
>>>>> @@ -6493,14 +6493,21 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
>>>>> u32 mac_data;
>>>>> u16 phy_data;
>>>>> u32 i = 0;
>>>>> + bool dpg_exit_done;
>>>>>
>>>>> if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
>>>>> + dpg_exit_done = er32(EXFWSM) & E1000_EXFWSM_DPG_EXIT_DONE;
>>>>> /* Request ME unconfigure the device from S0ix */
>>>>> mac_data = er32(H2ME);
>>>>> mac_data &= ~E1000_H2ME_START_DPG;
>>>>> mac_data |= E1000_H2ME_EXIT_DPG;
>>>>> ew32(H2ME, mac_data);
>>>>>
>>>>> + if (dpg_exit_done) {
>>>>> + e_warn("DPG_EXIT_DONE is already flagged. This is a firmware bug\n");
>>>>> + msleep(1000);
>>>>> + }
>>>> Thanks for working on the enablement.
>>>> The delay approach is fragile. We need to work with CSME folks to
>>>> understand why _DPG_EXIT_DONE indication is wrong on some ADL platforms.
>>>> Could you provide CSME/BIOS version? dmidecode -t 0 and cat
>>>> /sys/class/mei/mei0/fw_ver
>>>
>>> $ sudo dmidecode -t 0
>>> # dmidecode 3.2
>>> Getting SMBIOS data from sysfs.
>>> SMBIOS 3.4 present.
>>> # SMBIOS implementations newer than version 3.2.0 are not
>>> # fully supported by this version of dmidecode.
>>>
>>> Handle 0x0001, DMI type 0, 26 bytes
>>> BIOS Information
>>> Vendor: Dell Inc.
>>> Version: 0.12.68
>>> Release Date: 10/01/2021
>>> ROM Size: 48 MB
>>> Characteristics:
>>> PCI is supported
>>> PNP is supported
>>> BIOS is upgradeable
>>> BIOS shadowing is allowed
>>> Boot from CD is supported
>>> Selectable boot is supported
>>> EDD is supported
>>> Print screen service is supported (int 5h)
>>> 8042 keyboard services are supported (int 9h)
>>> Serial services are supported (int 14h)
>>> Printer services are supported (int 17h)
>>> ACPI is supported
>>> USB legacy is supported
>>> BIOS boot specification is supported
>>> Function key-initiated network boot is supported
>>> Targeted content distribution is supported
>>> UEFI is supported
>>> BIOS Revision: 0.12
>>>
>>> $ cat /sys/class/mei/mei0/fw_ver
>>> 0:16.0.15.1518
>>> 0:16.0.15.1518
>>> 0:16.0.15.1518
>>>
>> Thank you Kai-Heng. The _DPG_EXIT_DONE bit indication comes from the
>> EXFWSM register controlled by the CSME. We have only read access. I
>> realized that this indication was set to 1 even before our request to
>> unconfigure the s0ix settings from the CSME. I am wondering. Does after
>> a ~ 1s delay (or less, or more) _DPG_EXIT_DONE indication eventually
>> change by CSME to 0? (is it consistently)
>
> Never. It's consistently being 1.
no. On my TGL platform is cleared by CSME:
[Sun Oct 31 08:54:40 2021] s0ix exit: EXFWSM register: 0x00000000
[Sun Oct 31 08:54:40 2021] s0ix exit (right after sent H2ME): EXFWSM
register: 0x00000000
[Sun Oct 31 08:54:40 2021] s0ix exit(after polling): EXFWSM register:
0x00000001
[Sun Oct 31 08:54:40 2021] e1000e 0000:00:1f.6 enp0s31f6: DPG_EXIT_DONE
cleared after 130 msec
>
> Right now we are seeing the same issue on TGL, so I wonder if it's
> better to just revert the CSME series?
no. We need to investigate it and understand what is CSME state we hit.
Meanwhile few options:
1. use privilege flags to disable s0ix flow for problematic system
(power will increased)
ethtool --set-priv-flags enp0s31f6 s0ix-enabled off
ethtool --show-priv-flags enp0s31f6
Private flags for enp0s31f6:
s0ix-enabled: off
2. delay as you suggested - less preferable I though
3. I would like to suggest (need to check it) in case the DPG_EXIT_DONE
is 1 (and polling will be exit immediately) - let's perform enforce
settings to the CSME, before write request to CSME unconfigure the
device from s0ix :
if (er32(EXFWSM) & E1000_EXFWSM_DPG_EXIT_DONE)
mac_data |= E1000_H2ME_ENFORCE_SETTINGS;
I will update Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=214821 with this information.
I also will need some another information regards SMB state in this case.
>
> Kai-Heng
>
>>>>> /* Poll up to 2.5 seconds for ME to unconfigure DPG.
>>>>> * If this takes more than 1 second, show a warning indicating a
>>>>> * firmware bug
>>>>>
>>
Powered by blists - more mailing lists