| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 2 Nov 2021 08:40:47 +0100
From: Marcel Holtmann <marcel@...tmann.org>
To: Greg KH <gregkh@...uxfoundation.org>
Cc: Zijun Hu <zijuhu@...eaurora.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-bluetooth <linux-bluetooth@...r.kernel.org>,
MSM <linux-arm-msm@...r.kernel.org>,
Balakrishna Godavarthi <bgodavar@...eaurora.org>,
c-hbandi@...eaurora.org, Hemantg <hemantg@...eaurora.org>,
Matthias Kaehlcke <mka@...omium.org>, rjliao@...eaurora.org,
Zijun Hu <quic_zijuhu@...cinc.com>
Subject: Re: [PATCH v1 3/3] Bluetooth: hci_qca: Add support for QTI bluetooth
MAPLE
Hi Greg,
>> Add support for MAPLE integrated within SOC, it is mounted on
>> a virtual tty port and powered on/off via relevant IOCTL, neither
>> IBS nor RAMPATCH downloading is not required.
>>
>> Signed-off-by: Zijun Hu <quic_zijuhu@...cinc.com>
>> ---
>> drivers/bluetooth/btqca.c | 13 ++++++++++++-
>> drivers/bluetooth/btqca.h | 13 +++++++++++++
>> drivers/bluetooth/hci_qca.c | 47 ++++++++++++++++++++++++++++++++++++++++++++-
>> 3 files changed, 71 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index be04d74037d2..b83d2ecefe5d 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -255,6 +255,8 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
>> BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
>> BT_DBG("Length\t\t : %d bytes", length);
>>
>> + if (qca_is_maple(soc_type))
>> + break;
>> idx = 0;
>> data = tlv->data;
>> while (idx < length) {
>> @@ -552,6 +554,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
>>
>> /* Download rampatch file */
>> + if (qca_is_maple(soc_type))
>> + goto download_nvm;
>> +
>> config.type = TLV_TYPE_PATCH;
>> if (qca_is_wcn399x(soc_type)) {
>> snprintf(config.fwname, sizeof(config.fwname),
>> @@ -580,6 +585,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> /* Give the controller some time to get ready to receive the NVM */
>> msleep(10);
>>
>> +download_nvm:
>> /* Download NVM configuration */
>> config.type = TLV_TYPE_NVM;
>> if (firmware_name)
>> @@ -597,6 +603,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> else if (soc_type == QCA_QCA6390)
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/htnv%02x.bin", rom_ver);
>> + else if (qca_is_maple(soc_type))
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/mpnv%02x.bin", rom_ver);
>> else if (soc_type == QCA_WCN6750)
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/msnv%02x.bin", rom_ver);
>> @@ -609,6 +618,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
>> return err;
>> }
>> + if (qca_is_maple(soc_type))
>> + msleep(MAPLE_NVM_READY_DELAY_MS);
>>
>> if (soc_type >= QCA_WCN3991) {
>> err = qca_disable_soc_logging(hdev);
>> @@ -637,7 +648,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> return err;
>> }
>>
>> - if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
>> + if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750 || qca_is_maple(soc_type)) {
>> /* get fw build info */
>> err = qca_read_fw_build_info(hdev);
>> if (err < 0)
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index 30afa7703afd..0a5a7d1daa71 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -46,6 +46,8 @@
>>
>> #define QCA_FW_BUILD_VER_LEN 255
>>
>> +#define MAPLE_NVM_READY_DELAY_MS 1500
>> +#define MAPLE_POWER_CONTROL_DELAY_MS 50
>>
>> enum qca_baudrate {
>> QCA_BAUDRATE_115200 = 0,
>> @@ -145,6 +147,7 @@ enum qca_btsoc_type {
>> QCA_WCN3991,
>> QCA_QCA6390,
>> QCA_WCN6750,
>> + QCA_MAPLE,
>> };
>>
>> #if IS_ENABLED(CONFIG_BT_QCA)
>> @@ -167,6 +170,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
>> return soc_type == QCA_WCN6750;
>> }
>>
>> +static inline bool qca_is_maple(enum qca_btsoc_type soc_type)
>> +{
>> + return soc_type == QCA_MAPLE;
>> +}
>> +
>> #else
>>
>> static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>> @@ -204,6 +212,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
>> return false;
>> }
>>
>> +static inline bool qca_is_maple(enum qca_btsoc_type soc_type)
>> +{
>> + return false;
>> +}
>> +
>> static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>> {
>> return -EOPNOTSUPP;
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index dd768a8ed7cb..f1d9670719c4 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -70,6 +70,10 @@
>> #define QCA_CRASHBYTE_PACKET_LEN 1096
>> #define QCA_MEMDUMP_BYTE 0xFB
>>
>> +#ifndef IOCTL_IPC_BOOT
>> +#define IOCTL_IPC_BOOT 0xBE
>> +#endif
>
> You send this command, but never use it. Where is the driver code that
> uses this command?
>
> And why not tabs?
>
> And why is this patch series not properly threaded so tools can pick it
> up and find them?
>
> And why the odd named ioctl that is different from other ones in this
> file?
>
> And why not just use normal power management hooks for doing things like
> turning on and off the hardware like all other drivers?
I am not merging this. We are not starting an IPC via an external ioctl.
Regards
Marcel
Powered by blists - more mailing lists