linux-kernel - [PATCH] phy: phy-can-transceiver: Make devm_gpiod

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20211102112120.23637-1-a-govindraju@ti.com>
Date:   Tue, 2 Nov 2021 16:51:20 +0530
From:   Aswath Govindraju <a-govindraju@...com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Nishanth Menon <nm@...com>,
        Aswath Govindraju <a-govindraju@...com>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>, <linux-can@...r.kernel.org>,
        <linux-phy@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH] phy: phy-can-transceiver: Make devm_gpiod_get optional

In some cases the standby/enable gpio can be pulled low/high and would not
be connected to a gpio. The current driver implementation will return an
error in these cases. Therefore, make devm_gpiod_get optional.

Signed-off-by: Aswath Govindraju <a-govindraju@...com>
---
 drivers/phy/phy-can-transceiver.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index c2cb93b4df71..6f3fe37dee0e 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -110,14 +110,14 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
 	can_transceiver_phy->generic_phy = phy;
 
 	if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
-		standby_gpio = devm_gpiod_get(dev, "standby", GPIOD_OUT_HIGH);
+		standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH);
 		if (IS_ERR(standby_gpio))
 			return PTR_ERR(standby_gpio);
 		can_transceiver_phy->standby_gpio = standby_gpio;
 	}
 
 	if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
-		enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+		enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
 		if (IS_ERR(enable_gpio))
 			return PTR_ERR(enable_gpio);
 		can_transceiver_phy->enable_gpio = enable_gpio;
-- 
2.17.1