| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211102161125.1144023-17-kernel@esmil.dk>
Date: Tue, 2 Nov 2021 17:11:25 +0100
From: Emil Renner Berthing <kernel@...il.dk>
To: linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-serial@...r.kernel.org
Cc: Emil Renner Berthing <kernel@...il.dk>,
Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Rob Herring <robh+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Jiri Slaby <jirislaby@...nel.org>,
Maximilian Luz <luzmaximilian@...il.com>,
Sagar Kadam <sagar.kadam@...ive.com>,
Drew Fustini <drew@...gleboard.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Michael Zhu <michael.zhu@...rfivetech.com>,
Fu Wei <tekkamanninja@...il.com>,
Anup Patel <anup.patel@....com>,
Atish Patra <atish.patra@....com>,
Matteo Croce <mcroce@...rosoft.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 16/16] RISC-V: Add BeagleV Starlight Beta device tree
Add initial device tree for the BeagleV Starlight Beta board. About 300
of these boards were sent out as part of a now cancelled BeagleBoard.org
project.
I2C timing data is based on the device tree in the vendor u-boot port.
Heartbeat LED added by Geert.
Signed-off-by: Emil Renner Berthing <kernel@...il.dk>
Co-developed-by: Geert Uytterhoeven <geert@...ux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@...ux-m68k.org>
---
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/starfive/Makefile | 2 +
.../dts/starfive/jh7100-beaglev-starlight.dts | 164 ++++++++++++++++++
3 files changed, 167 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/Makefile
create mode 100644 arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index fe996b88319e..ff174996cdfd 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
subdir-y += sifive
+subdir-y += starfive
subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
subdir-y += microchip
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
new file mode 100644
index 000000000000..0ea1bc15ab30
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
new file mode 100644
index 000000000000..c9af67f7a0d2
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@...il.dk>
+ */
+
+/dts-v1/;
+#include "jh7100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive.h>
+
+/ {
+ model = "BeagleV Starlight Beta";
+ compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <6250000>;
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-ack {
+ gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "heartbeat";
+ label = "ack";
+ };
+ };
+};
+
+&gpio {
+ i2c0_pins: i2c0-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(62, GPO_LOW,
+ GPO_I2C0_PAD_SCK_OEN,
+ GPI_I2C0_PAD_SCK_IN)>,
+ <GPIOMUX(61, GPO_LOW,
+ GPO_I2C0_PAD_SDA_OEN,
+ GPI_I2C0_PAD_SDA_IN)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(47, GPO_LOW,
+ GPO_I2C1_PAD_SCK_OEN,
+ GPI_I2C1_PAD_SCK_IN)>,
+ <GPIOMUX(48, GPO_LOW,
+ GPO_I2C1_PAD_SDA_OEN,
+ GPI_I2C1_PAD_SDA_IN)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c2_pins: i2c2-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(60, GPO_LOW,
+ GPO_I2C2_PAD_SCK_OEN,
+ GPI_I2C2_PAD_SCK_IN)>,
+ <GPIOMUX(59, GPO_LOW,
+ GPO_I2C2_PAD_SDA_OEN,
+ GPI_I2C2_PAD_SDA_IN)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ uart3_pins: uart3-0 {
+ rx-pins {
+ pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+ GPI_UART3_PAD_SIN)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ tx-pins {
+ pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+ GPO_ENABLE, GPI_NONE)>;
+ bias-disable;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <500>;
+ i2c-scl-falling-time-ns = <500>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ pmic@5e {
+ compatible = "ti,tps65086";
+ reg = <0x5e>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ regulators {
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <100>;
+ i2c-scl-falling-time-ns = <100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <500>;
+ i2c-scl-falling-time-ns = <500>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&osc_sys {
+ clock-frequency = <25000000>;
+};
+
+&osc_aud {
+ clock-frequency = <27000000>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+};
--
2.33.1
Powered by blists - more mailing lists