| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211102161125.1144023-16-kernel@esmil.dk>
Date: Tue, 2 Nov 2021 17:11:24 +0100
From: Emil Renner Berthing <kernel@...il.dk>
To: linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-serial@...r.kernel.org
Cc: Emil Renner Berthing <kernel@...il.dk>,
Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Rob Herring <robh+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Jiri Slaby <jirislaby@...nel.org>,
Maximilian Luz <luzmaximilian@...il.com>,
Sagar Kadam <sagar.kadam@...ive.com>,
Drew Fustini <drew@...gleboard.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Michael Zhu <michael.zhu@...rfivetech.com>,
Fu Wei <tekkamanninja@...il.com>,
Anup Patel <anup.patel@....com>,
Atish Patra <atish.patra@....com>,
Matteo Croce <mcroce@...rosoft.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 15/16] RISC-V: Add initial StarFive JH7100 device tree
Add initial device tree for the JH7100 RISC-V SoC by StarFive Ltd. This
is a test chip for their upcoming JH7110 SoC.
The CPU and cache data is based on the device tree in the vendor u-boot
port.
Signed-off-by: Emil Renner Berthing <kernel@...il.dk>
---
arch/riscv/boot/dts/starfive/jh7100.dtsi | 230 +++++++++++++++++++++++
1 file changed, 230 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7100.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
new file mode 100644
index 000000000000..69f22f9aad9d
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@...il.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7100.h>
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/ {
+ compatible = "starfive,jh7100";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu@1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ osc_sys: osc_sys {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ osc_aud: osc_aud {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ gmac_rmii_ref: gmac_rmii_ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* Should be overridden by the board when needed */
+ clock-frequency = <0>;
+ };
+
+ gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* Should be overridden by the board when needed */
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: clint@...0000 {
+ compatible = "starfive,jh7100-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+ &cpu1_intc 3 &cpu1_intc 7>;
+ };
+
+ plic: interrupt-controller@...0000 {
+ compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
+ &cpu1_intc 11 &cpu1_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ riscv,ndev = <127>;
+ };
+
+ clkgen: clock-controller@...00000 {
+ compatible = "starfive,jh7100-clkgen";
+ reg = <0x0 0x11800000 0x0 0x10000>;
+ clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+ clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+ #clock-cells = <1>;
+ };
+
+ rstgen: reset-controller@...40000 {
+ compatible = "starfive,jh7100-reset";
+ reg = <0x0 0x11840000 0x0 0x10000>;
+ #reset-cells = <1>;
+ };
+
+ i2c0: i2c@...b0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x118b0000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_I2C0_CORE>,
+ <&clkgen JH7100_CLK_I2C0_APB>;
+ clock-names = "ref", "pclk";
+ resets = <&rstgen JH7100_RSTN_I2C0_APB>;
+ interrupts = <96>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...c0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x118c0000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_I2C1_CORE>,
+ <&clkgen JH7100_CLK_I2C1_APB>;
+ clock-names = "ref", "pclk";
+ resets = <&rstgen JH7100_RSTN_I2C1_APB>;
+ interrupts = <97>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ gpio: pinctrl@...10000 {
+ compatible = "starfive,jh7100-pinctrl";
+ reg = <0x0 0x11910000 0x0 0x10000>,
+ <0x0 0x11858000 0x0 0x1000>;
+ reg-names = "gpio", "padctl";
+ clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+ resets = <&rstgen JH7100_RSTN_GPIO_APB>;
+ interrupts = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart2: serial@...30000 {
+ compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+ reg = <0x0 0x12430000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_UART2_CORE>,
+ <&clkgen JH7100_CLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&rstgen JH7100_RSTN_UART2_APB>;
+ interrupts = <72>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@...40000 {
+ compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+ reg = <0x0 0x12440000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_UART3_CORE>,
+ <&clkgen JH7100_CLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&rstgen JH7100_RSTN_UART3_APB>;
+ interrupts = <73>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@...50000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12450000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_I2C2_CORE>,
+ <&clkgen JH7100_CLK_I2C2_APB>;
+ clock-names = "ref", "pclk";
+ resets = <&rstgen JH7100_RSTN_I2C2_APB>;
+ interrupts = <74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@...60000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12460000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_I2C3_CORE>,
+ <&clkgen JH7100_CLK_I2C3_APB>;
+ clock-names = "ref", "pclk";
+ resets = <&rstgen JH7100_RSTN_I2C3_APB>;
+ interrupts = <75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+};
--
2.33.1
Powered by blists - more mailing lists