linux-kernel - [net-next] net: dsa: qca8k: only change the MIB_EN bit in MODULE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu,  4 Nov 2021 13:49:27 +0100
From:   Robert Marko <robert.marko@...tura.hr>
To:     andrew@...n.ch, vivien.didelot@...il.com, f.fainelli@...il.com,
        olteanv@...il.com, davem@...emloft.net, kuba@...nel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Gabor Juhos <j4g8y7@...il.com>,
        Robert Marko <robert.marko@...tura.hr>
Subject: [net-next] net: dsa: qca8k: only change the MIB_EN bit in MODULE_EN register

From: Gabor Juhos <j4g8y7@...il.com>

The MIB module needs to be enabled in the MODULE_EN register in
order to make it to counting. This is done in the qca8k_mib_init()
function. However instead of only changing the MIB module enable
bit, the function writes the whole register. As a side effect other
internal modules gets disabled.

Fix up the code to only change the MIB module specific bit.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Gabor Juhos <j4g8y7@...il.com>
Signed-off-by: Robert Marko <robert.marko@...tura.hr>
---
 drivers/net/dsa/qca8k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index a984f06f6f04..a229776924f8 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -583,7 +583,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
 	if (ret)
 		goto exit;
 
-	ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+	ret = qca8k_reg_set(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
 
 exit:
 	mutex_unlock(&priv->reg_mutex);
-- 
2.33.1