linux-kernel - Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ab3c62c9b4fa8f4507050a4b329ea30d9c7dcddb.camel@ew.tq-group.com>
Date:   Mon, 08 Nov 2021 10:11:21 +0100
From:   Matthias Schiffer <matthias.schiffer@...tq-group.com>
To:     Stefan Agner <stefan@...er.ch>, Alison Wang <alison.wang@....com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>
Cc:     dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A

On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
> The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A,
> or the access will hang.
> 
> Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>

Hi,
what is the status of this patch? I found it "archived" in the dri-
devel patchwork, should I be looking somewhere else?




> ---
> 
> v2:
> - rebase
> - remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
> 
> 
>  drivers/gpu/drm/fsl-dcu/Kconfig           |  1 +
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h |  3 +++
>  3 files changed, 29 insertions(+)
> 
> diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
> index d7dd8ba90e3a..9e5a35e7c00c 100644
> --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> @@ -8,6 +8,7 @@ config DRM_FSL_DCU
>  	select DRM_PANEL
>  	select REGMAP_MMIO
>  	select VIDEOMODE_HELPERS
> +	select MFD_SYSCON if SOC_LS1021A
>  	help
>  	  Choose this option if you have an Freescale DCU chipset.
>  	  If M is selected the module will be called fsl-dcu-drm.
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> index 660fe573db96..b6b1cb75fc41 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -50,6 +50,23 @@ static const struct regmap_config fsl_dcu_regmap_config = {
>  	.volatile_reg = fsl_dcu_drm_is_volatile_reg,
>  };
>  
> +static int fsl_dcu_scfg_config_ls1021a(void)
> +{
> +	struct regmap *scfg;
> +
> +	scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> +	if (IS_ERR(scfg))
> +		return PTR_ERR(scfg);
> +
> +	/*
> +	 * For simplicity, enable the PIXCLK unconditionally. It might
> +	 * be possible to disable the clock in PM or on unload as a future
> +	 * improvement.
> +	 */
> +	return regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
> +				  SCFG_PIXCLKCR_PXCEN);
> +}
> +
>  static void fsl_dcu_irq_reset(struct drm_device *dev)
>  {
>  	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
>  		return ret;
>  	}
>  
> +	if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
> +		ret = fsl_dcu_scfg_config_ls1021a();
> +		if (ret < 0) {
> +			dev_err(dev->dev, "failed to enable pixclk\n");
> +			goto done_vblank;
> +		}
> +	}
> +
>  	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
>  	if (ret < 0) {
>  		dev_err(dev->dev, "failed to initialize vblank\n");
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> index e2049a0e8a92..566396013c04 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> @@ -160,6 +160,9 @@
>  #define FSL_DCU_ARGB4444		12
>  #define FSL_DCU_YUV422			14
>  
> +#define SCFG_PIXCLKCR			0x28
> +#define SCFG_PIXCLKCR_PXCEN		BIT(31)
> +
>  #define VF610_LAYER_REG_NUM		9
>  #define LS1021A_LAYER_REG_NUM		10
>