[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <YYk35SnRf/iaxx+C@donbot>
Date: Mon, 8 Nov 2021 14:44:53 +0000
From: John Keeping <john@...anate.com>
To: Minas Harutyunyan <Minas.Harutyunyan@...opsys.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] usb: dwc2: gadget: respect driver's max_speed
On Mon, Nov 08, 2021 at 07:56:50AM +0000, Minas Harutyunyan wrote:
> On 11/5/2021 9:23 PM, John Keeping wrote:
> > UDCs should not enumerate faster than the max_speed set by the gadget
> > driver. Use this to further restrict the speed set in the DWC2
> > parameters so that the device will not connect faster than is supported
> > by the gadget driver.
> >
> > For configfs-based composite devices this can be set via the max_speed
> > configfs file.
> >
> > Signed-off-by: John Keeping <john@...anate.com>
>
> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@...opsys.com>
Actually, this isn't needed following commit 5324bad66f09 ("usb: dwc2:
gadget: implement udc_set_speed()") - I should have tested on something
more recent than 5.10.
There are still some problems in this area for dwc2 platforms that do
not support high-speed, but this patch is not the fix for them. Please
drop this.
Sorry for the noise,
John
> > ---
> > drivers/usb/dwc2/gadget.c | 18 +++++++++++++++++-
> > 1 file changed, 17 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> > index 744539b78f6c..1f39c2f1be8e 100644
> > --- a/drivers/usb/dwc2/gadget.c
> > +++ b/drivers/usb/dwc2/gadget.c
> > @@ -3377,6 +3377,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
> > u32 val;
> > u32 usbcfg;
> > u32 dcfg = 0;
> > + u8 speed;
> > int ep;
> >
> > /* Kill any ep0 requests as controller will be reinitialized */
> > @@ -3418,7 +3419,22 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
> >
> > dcfg |= DCFG_EPMISCNT(1);
> >
> > - switch (hsotg->params.speed) {
> > + speed = hsotg->params.speed;
> > + if (hsotg->driver) {
> > + switch (hsotg->driver->max_speed) {
> > + case USB_SPEED_LOW:
> > + speed = DWC2_SPEED_PARAM_LOW;
> > + break;
> > + case USB_SPEED_FULL:
> > + if (speed != USB_SPEED_LOW)
> > + speed = DWC2_SPEED_PARAM_FULL;
> > + break;
> > + default:
> > + break;
> > + }
> > + }
> > +
> > + switch (speed) {
> > case DWC2_SPEED_PARAM_LOW:
> > dcfg |= DCFG_DEVSPD_LS;
> > break;
> >
>
Powered by blists - more mailing lists