[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211108200854.3616121-1-dinguyen@kernel.org>
Date: Mon, 8 Nov 2021 14:08:54 -0600
From: Dinh Nguyen <dinguyen@...nel.org>
To: broonie@...nel.org
Cc: dinguyen@...nel.org, a-nandan@...com, linux-spi@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] spi: cadence-quadspi: fix write completion support
Some versions of the Cadence QSPI controller does not have the write
completion register implemented(CQSPI_REG_WR_COMPLETION_CTRL). On the
Intel SoCFPGA platform the CQSPI_REG_WR_COMPLETION_CTRL register is
not configured.
Add a quirk to not write to the CQSPI_REG_WR_COMPLETION_CTRL register.
Fixes: 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling)
Signed-off-by: Dinh Nguyen <dinguyen@...nel.org>
---
drivers/spi/spi-cadence-quadspi.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 8b3d268ac63c..b808c94641fa 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -37,6 +37,7 @@
#define CQSPI_NEEDS_WR_DELAY BIT(0)
#define CQSPI_DISABLE_DAC_MODE BIT(1)
#define CQSPI_SUPPORT_EXTERNAL_DMA BIT(2)
+#define CQSPI_NO_SUPPORT_WR_COMPLETION BIT(3)
/* Capabilities */
#define CQSPI_SUPPORTS_OCTAL BIT(0)
@@ -86,6 +87,7 @@ struct cqspi_st {
struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
bool use_dma_read;
u32 pd_dev_id;
+ bool wr_completion;
};
struct cqspi_driver_platdata {
@@ -996,9 +998,11 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata,
* polling on the controller's side. spinand and spi-nor will take
* care of polling the status register.
*/
- reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
- reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
- writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ if (cqspi->wr_completion) {
+ reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
+ writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ }
reg = readl(reg_base + CQSPI_REG_SIZE);
reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
@@ -1736,6 +1740,10 @@ static int cqspi_probe(struct platform_device *pdev)
cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
master->max_speed_hz = cqspi->master_ref_clk_hz;
+
+ /* write completion is supported by default */
+ cqspi->wr_completion = true;
+
ddata = of_device_get_match_data(dev);
if (ddata) {
if (ddata->quirks & CQSPI_NEEDS_WR_DELAY)
@@ -1747,6 +1755,8 @@ static int cqspi_probe(struct platform_device *pdev)
cqspi->use_direct_mode = true;
if (ddata->quirks & CQSPI_SUPPORT_EXTERNAL_DMA)
cqspi->use_dma_read = true;
+ if (ddata->quirks & CQSPI_NO_SUPPORT_WR_COMPLETION)
+ cqspi->wr_completion = false;
if (of_device_is_compatible(pdev->dev.of_node,
"xlnx,versal-ospi-1.0"))
@@ -1859,6 +1869,10 @@ static const struct cqspi_driver_platdata intel_lgm_qspi = {
.quirks = CQSPI_DISABLE_DAC_MODE,
};
+static const struct cqspi_driver_platdata socfpga_qspi = {
+ .quirks = CQSPI_NO_SUPPORT_WR_COMPLETION,
+};
+
static const struct cqspi_driver_platdata versal_ospi = {
.hwcaps_mask = CQSPI_SUPPORTS_OCTAL,
.quirks = CQSPI_DISABLE_DAC_MODE | CQSPI_SUPPORT_EXTERNAL_DMA,
@@ -1887,6 +1901,10 @@ static const struct of_device_id cqspi_dt_ids[] = {
.compatible = "xlnx,versal-ospi-1.0",
.data = (void *)&versal_ospi,
},
+ {
+ .compatible = "intel,socfpga-qspi",
+ .data = (void *)&socfpga_qspi,
+ },
{ /* end of table */ }
};
--
2.25.1
Powered by blists - more mailing lists