lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211109022608.11109-6-ansuelsmth@gmail.com>
Date:   Tue,  9 Nov 2021 03:26:05 +0100
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Jonathan Corbet <corbet@....net>, Pavel Machek <pavel@....cz>,
        Ansuel Smith <ansuelsmth@...il.com>,
        John Crispin <john@...ozen.org>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-leds@...r.kernel.org,
        Marek BehĂșn <kabel@...nel.org>
Subject: [RFC PATCH v3 5/8] leds: trigger: netdev: add hardware control support

Add hardware control support for the Netdev trigger.
The trigger on config change will check if the requested trigger can set
to blink mode using LED hardware mode and if every blink mode is supported,
the trigger will enable hardware mode with the requested configuration.
If there is at least one trigger that is not supported and can't run in
hardware mode, then software mode will be used instead.

Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 61 ++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 0a3c0b54dbb9..28d9def2fbd0 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -37,6 +37,7 @@
  */
 
 struct led_netdev_data {
+	bool hw_mode_supported;
 	spinlock_t lock;
 
 	struct delayed_work work;
@@ -61,9 +62,52 @@ enum netdev_led_attr {
 
 static void set_baseline_state(struct led_netdev_data *trigger_data)
 {
+	bool can_offload;
 	int current_brightness;
+	u32 hw_blink_mode_supported;
 	struct led_classdev *led_cdev = trigger_data->led_cdev;
 
+	if (trigger_data->hw_mode_supported) {
+		if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) &&
+		    led_trigger_blink_mode_is_supported(led_cdev, TRIGGER_NETDEV_LINK))
+			hw_blink_mode_supported |= TRIGGER_NETDEV_LINK;
+		if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
+		    led_trigger_blink_mode_is_supported(led_cdev, TRIGGER_NETDEV_TX))
+			hw_blink_mode_supported |= TRIGGER_NETDEV_TX;
+		if (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) &&
+		    led_trigger_blink_mode_is_supported(led_cdev, TRIGGER_NETDEV_RX))
+			hw_blink_mode_supported |= TRIGGER_NETDEV_RX;
+
+		/* All the requested blink mode can be triggered by hardware.
+		 * Put it in hardware mode.
+		 */
+		if (hw_blink_mode_supported == trigger_data->mode)
+			can_offload = true;
+
+		if (can_offload) {
+			/* We are refreshing the blink modes. Reset them */
+			led_cdev->hw_control_configure(led_cdev, TRIGGER_NETDEV_LINK,
+						       BLINK_MODE_ZERO);
+
+			if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
+				led_cdev->hw_control_configure(led_cdev, TRIGGER_NETDEV_LINK,
+							       BLINK_MODE_ENABLE);
+			if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode))
+				led_cdev->hw_control_configure(led_cdev, TRIGGER_NETDEV_TX,
+							       BLINK_MODE_ENABLE);
+			if (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
+				led_cdev->hw_control_configure(led_cdev, TRIGGER_NETDEV_RX,
+							       BLINK_MODE_ENABLE);
+			led_cdev->hw_control_start(led_cdev);
+
+			return;
+		}
+	}
+
+	/* If LED supports only hardware mode then skip any software handling */
+	if (led_cdev->blink_mode == HARDWARE_CONTROLLED)
+		return;
+
 	current_brightness = led_cdev->brightness;
 	if (current_brightness)
 		led_cdev->blink_brightness = current_brightness;
@@ -407,13 +451,27 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
 	trigger_data->mode = 0;
 	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
 	trigger_data->last_activity = 0;
+	if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
+		trigger_data->hw_mode_supported = true;
+
+		/* With hw mode enabled reset any rule set by default */
+		if (led_cdev->hw_control_status(led_cdev)) {
+			rc = led_cdev->hw_control_configure(led_cdev, TRIGGER_NETDEV_LINK,
+							    BLINK_MODE_ZERO);
+			if (rc)
+				goto err;
+		}
+	}
 
 	led_set_trigger_data(led_cdev, trigger_data);
 
 	rc = register_netdevice_notifier(&trigger_data->notifier);
 	if (rc)
-		kfree(trigger_data);
+		goto err;
 
+	return 0;
+err:
+	kfree(trigger_data);
 	return rc;
 }
 
@@ -433,6 +491,7 @@ static void netdev_trig_deactivate(struct led_classdev *led_cdev)
 
 static struct led_trigger netdev_led_trigger = {
 	.name = "netdev",
+	.supported_blink_modes = SOFTWARE_HARDWARE,
 	.activate = netdev_trig_activate,
 	.deactivate = netdev_trig_deactivate,
 	.groups = netdev_trig_groups,
-- 
2.32.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ