linux-kernel - Re: [PATCH v3] PCI: mediatek-gen3: Disable DVFSRC voltage request

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b18f74b8831492c4a75f45fa778c359fd80184d0.camel@mediatek.com>
Date:   Tue, 9 Nov 2021 14:10:25 +0800
From:   Jianjun Wang <jianjun.wang@...iatek.com>
To:     Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Ryder Lee <ryder.lee@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>
CC:     <linux-pci@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <qizhong.cheng@...iatek.com>, <Ryan-JH.Yu@...iatek.com>,
        Tzung-Bi Shih <tzungbi@...gle.com>
Subject: Re: [PATCH v3] PCI: mediatek-gen3: Disable DVFSRC voltage request

Hi Maintainers,

Just gentle ping for this patch, if there is anything I need to modify,
please kindly let me know.

Thanks.

On Fri, 2021-10-15 at 14:36 +0800, Jianjun Wang wrote:
> When the DVFSRC (dynamic voltage and frequency scaling resource
> collector)
> feature is not implemented, the PCIe hardware will assert a voltage
> request
> signal when exit from the L1 PM Substates to request a specific Vcore
> voltage, but cannot receive the voltage ready signal, which will
> cause
> the link to fail to exit the L1 PM Substates.
> 
> Disable DVFSRC voltage request by default, we need to find a common
> way to
> enable it in the future.
> 
> Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver
> for MT8192")
> Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
> Reviewed-by: Tzung-Bi Shih <tzungbi@...gle.com>
> Tested-by: Qizhong Cheng <qizhong.cheng@...iatek.com>
> ---
>  drivers/pci/controller/pcie-mediatek-gen3.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> b/drivers/pci/controller/pcie-mediatek-gen3.c
> index f3aeb8d4eaca..79fb12fca6a9 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -79,6 +79,9 @@
>  #define PCIE_ICMD_PM_REG		0x198
>  #define PCIE_TURN_OFF_LINK		BIT(4)
>  
> +#define PCIE_MISC_CTRL_REG		0x348
> +#define PCIE_DISABLE_DVFSRC_VLT_REQ	BIT(1)
> +
>  #define PCIE_TRANS_TABLE_BASE_REG	0x800
>  #define PCIE_ATR_SRC_ADDR_MSB_OFFSET	0x4
>  #define PCIE_ATR_TRSL_ADDR_LSB_OFFSET	0x8
> @@ -297,6 +300,11 @@ static int mtk_pcie_startup_port(struct
> mtk_pcie_port *port)
>  	val &= ~PCIE_INTX_ENABLE;
>  	writel_relaxed(val, port->base + PCIE_INT_ENABLE_REG);
>  
> +	/* Disable DVFSRC voltage request */
> +	val = readl_relaxed(port->base + PCIE_MISC_CTRL_REG);
> +	val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
> +	writel_relaxed(val, port->base + PCIE_MISC_CTRL_REG);
> +
>  	/* Assert all reset signals */
>  	val = readl_relaxed(port->base + PCIE_RST_CTRL_REG);
>  	val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
> PCIE_PE_RSTB;