[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211109095013.27829-1-martin.kaistra@linutronix.de>
Date: Tue, 9 Nov 2021 10:50:02 +0100
From: Martin Kaistra <martin.kaistra@...utronix.de>
To: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>
Cc: martin.kaistra@...utronix.de,
Richard Cochran <richardcochran@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
John Stultz <john.stultz@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Stephen Boyd <sboyd@...nel.org>,
Russell King <linux@...linux.org.uk>,
Marc Kleine-Budde <mkl@...gutronix.de>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH v2 0/7] Add PTP support for BCM53128 switch
Hi,
this series adds PTP support to the b53 DSA driver for the BCM53128
switch using the BroadSync HD feature.
As there seems to be only one filter (either by Ethertype or DA) for
timestamping incoming packets, only L2 is supported.
To be able to use the timecounter infrastructure with a counter that
wraps around at a non-power of two point, patch 2 adds support for such
a custom point. Alternatively I could fix up the delta every time a
wrap-around occurs in the driver itself, but this way it can also be
useful for other hardware.
v1 -> v2: fix compiling each patch with W=1 C=1
fix compiling when NET_DSA or B53 = m
return error on request for too broad filters
use aux_work for overflow check
fix signature of b53_port_txtstamp() for !CONFIG_B53_PTP
rework broadsync hd register definitions
add and use register definitions for multiport control
remove setting default value for B53_BROADSYNC_TIMEBASE_ADJ
simplify initialisation of dev->ptp_clock_info
fix pskb_may_pull() for different tag lengths
add unlikely() to check for status frames
add pointer to b53_port_hwtstamp from dp->priv to simplify access from tag_brcm.c
Ideally, for the B53=m case, I would have liked to include the PTP
support in the b53_module itself, however I couldn't find a way to do
that without renaming either the common source file or the module, which
I didn't want to do.
Instead, b53_ptp will be allowed as a loadable module, but only if
b53_common is also a module, otherwise it will be built-in.
This is v2, the previous version can be found here:
https://lore.kernel.org/netdev/20211104133204.19757-1-martin.kaistra@linutronix.de/
Thanks,
Martin
Kurt Kanzenbach (1):
net: dsa: b53: Add BroadSync HD register definitions
Martin Kaistra (6):
net: dsa: b53: Move struct b53_device to include/linux/dsa/b53.h
timecounter: allow for non-power of two overflow
net: dsa: b53: Add PHC clock support
net: dsa: b53: Add logic for RX timestamping
net: dsa: b53: Add logic for TX timestamping
net: dsa: b53: Expose PTP timestamping ioctls to userspace
drivers/net/dsa/b53/Kconfig | 8 +
drivers/net/dsa/b53/Makefile | 4 +
drivers/net/dsa/b53/b53_common.c | 21 ++
drivers/net/dsa/b53/b53_priv.h | 90 +-------
drivers/net/dsa/b53/b53_ptp.c | 366 +++++++++++++++++++++++++++++++
drivers/net/dsa/b53/b53_ptp.h | 67 ++++++
drivers/net/dsa/b53/b53_regs.h | 71 ++++++
include/linux/dsa/b53.h | 144 ++++++++++++
include/linux/timecounter.h | 3 +
kernel/time/timecounter.c | 3 +
net/dsa/tag_brcm.c | 81 ++++++-
11 files changed, 760 insertions(+), 98 deletions(-)
create mode 100644 drivers/net/dsa/b53/b53_ptp.c
create mode 100644 drivers/net/dsa/b53/b53_ptp.h
create mode 100644 include/linux/dsa/b53.h
--
2.20.1
Powered by blists - more mailing lists