lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 10 Nov 2021 16:21:57 -0600
From:   Li Yang <leoyang.li@....com>
To:     Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, Li Yang <leoyang.li@....com>,
        Hou Zhiqiang <Zhiqiang.Hou@....com>
Subject: [PATCH 08/11] arm64: dts: lx2160a: update PCIe nodes to match rev2 silicon

The original dts was created based on the non-production rev1 silicon
which was only used for evaluation.  Update the PCIe nodes to align with
the different controller used in production rev2 silicon.

Signed-off-by: Li Yang <leoyang.li@....com>
Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou@....com>
---
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 96 +++++++++----------
 1 file changed, 48 insertions(+), 48 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 5d1f84f4de29..05a3d403fe0c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1088,10 +1088,10 @@ sata3: sata@...0000 {
 		};
 
 		pcie1: pcie@...0000 {
-			compatible = "fsl,lx2160a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
-			      <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "csr_axi_slave", "config_axi_slave";
+			compatible = "fsl,ls2088a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
@@ -1100,26 +1100,26 @@ pcie1: pcie@...0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			apio-wins = <8>;
-			ppio-wins = <8>;
+			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
 		pcie2: pcie@...0000 {
-			compatible = "fsl,lx2160a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
-			      <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "csr_axi_slave", "config_axi_slave";
+			compatible = "fsl,ls2088a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
 				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
@@ -1128,26 +1128,26 @@ pcie2: pcie@...0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			apio-wins = <8>;
-			ppio-wins = <8>;
+			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
 		pcie3: pcie@...0000 {
-			compatible = "fsl,lx2160a-pcie";
-			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
-			      <0x90 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "csr_axi_slave", "config_axi_slave";
+			compatible = "fsl,ls2088a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
@@ -1156,26 +1156,26 @@ pcie3: pcie@...0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			apio-wins = <256>;
-			ppio-wins = <24>;
+			num-viewport = <256>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x90 0x00010000 0x0 0x00010000
+				  0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
 		pcie4: pcie@...0000 {
-			compatible = "fsl,lx2160a-pcie";
-			reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
-			      <0x98 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "csr_axi_slave", "config_axi_slave";
+			compatible = "fsl,ls2088a-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+			       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
 				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
@@ -1184,26 +1184,26 @@ pcie4: pcie@...0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			apio-wins = <8>;
-			ppio-wins = <8>;
+			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x98 0x00010000 0x0 0x00010000
+				  0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
 		pcie5: pcie@...0000 {
-			compatible = "fsl,lx2160a-pcie";
-			reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */
-			      <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "csr_axi_slave", "config_axi_slave";
+			compatible = "fsl,ls2088a-pcie";
+			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
+			       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
 				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
@@ -1212,26 +1212,26 @@ pcie5: pcie@...0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			apio-wins = <256>;
-			ppio-wins = <24>;
+			num-viewport = <256>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0xa0 0x00010000 0x0 0x00010000
+				  0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
 		pcie6: pcie@...0000 {
-			compatible = "fsl,lx2160a-pcie";
-			reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */
-			      <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "csr_axi_slave", "config_axi_slave";
+			compatible = "fsl,ls2088a-pcie";
+			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
+			       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
 				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
@@ -1240,18 +1240,18 @@ pcie6: pcie@...0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			apio-wins = <8>;
-			ppio-wins = <8>;
+			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0xa8 0x00010000 0x0 0x00010000
+				  0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ