| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fb546475-8e61-b847-67c4-466dee57b318@aspeedtech.com>
Date: Wed, 10 Nov 2021 10:40:50 +0800
From: Jammy Huang <jammy_huang@...eedtech.com>
To: Hans Verkuil <hverkuil@...all.nl>,
"eajames@...ux.ibm.com" <eajames@...ux.ibm.com>,
"mchehab@...nel.org" <mchehab@...nel.org>,
"joel@....id.au" <joel@....id.au>,
"andrew@...id.au" <andrew@...id.au>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"openbmc@...ts.ozlabs.org" <openbmc@...ts.ozlabs.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 5/7] media: aspeed: Support aspeed mode to reduce
compressed data
Dear Hans,
On 2021/11/9 下午 06:17, Hans Verkuil wrote:
> On 11/9/21 2:56 AM, Jammy Huang wrote:
>> Dear Hans,
>>
>> Thanks for your review.
>>
>> On 2021/11/8 下午 05:09, Hans Verkuil wrote:
>>> On 22/10/2021 08:55, Jammy Huang wrote:
>>>> aspeed supports differential jpeg format which only compress the parts
>>>> which are changed. In this way, it reduces both the amount of data to be
>>>> transferred by network and those to be decoded on the client side.
>>>>
>>>> 4 new ctrls are added:
>>>> * Aspeed JPEG Format: to control aspeed's partial jpeg on/off
>>>> 0: standard jpeg, 1: aspeed jpeg
>>> What exactly is 'aspeed jpeg'?
>> 'aspeed jpeg' is aspeed proprietary compression format. It will compare
>> the new frame
>> with previous one to decide which macroblock's data is changed, and only
>> the changed
>> macroblock will be compressed. In this way, the amount of compressed data is
>> significantly reduced. This is similar to the concept of I/P-frames of
>> video compression.
> Right, but that makes this a new vendor-specific pixelformat, not a control.
OK, I will add a new vendor-specific pixelformat for this.
>
>> For example, the video is static in first 3 frames and then a object in
>> the video moved in
>> 4th frame.
>>
>> Frame Content | Standard | Aspeed
>> -----------------------------------------------------------------------
>> 1th | Full | Full
>> 2th identical with 1st | Full | none (only about
>> 12 Bytes for header data)
>> 3th identical with 1st | Full | none
>> 4th a object moved | Full | Only the Macroblocks
>> that have data changed are compressed
>>
>> I have implemented a javascript aspeed decoder in novnc to support this
>> format, but
>> the performance isn't good enough. I am working on a web-assembly to
>> improve it.
> Is this format documented in a datasheet or something similar, ideally freely
> available?
This format is documented in ast2400/2500/2600's datasheet, but it's not
freely available.
>
>>>> * Aspeed Compression Mode: to control aspeed's compression mode
>>>> 0: DCT Only, 1: DCT VQ mix 2-color, 2: DCT VQ mix 4-color
>>>> This is AST2400 only. It will adapt JPEG or VQ encoding method according
>>>> to the context automatically.
>>> What exactly does this do?
>>>
>>> Is this very aspeed-specific, or could this be a standard JPEG control?
>> Yes, this is aspeed-specific. Its compression algorithm is a modified
>> JPEG algorithm.
> Is this specific to the aspeed jpeg format, or also to the 'regular' jpeg format?
It's specific to the aspeed jpeg format. Regular jpeg is based on DCT
and doesn't support VQ
compression
>
> Regards,
>
> Hans
>
>>>> * Aspeed HQ Mode: to control aspeed's HQ mode on/off
>>>> 0: disabled, 1: enabled
>>>> * Aspeed HQ Quality: to control the quality of aspeed's HQ mode
>>>> only useful if Aspeed HQ mode is enabled
>>> Can these two controls be replaced by the existing V4L2_CID_JPEG_COMPRESSION_QUALITY
>>> control? I.e.: range 1..12 is non-HQ, 13-24 is HQ. Note that the spec recommends
>>> that value 0 is not used in the V4L2_CID_JPEG_COMPRESSION_QUALITY range:
>>>
>>> https://hverkuil.home.xs4all.nl/spec/userspace-api/v4l/ext-ctrls-jpeg.html
>> HQ mode is aspeed-specific and not related to stanard jpeg's compression
>> quality. These two
>> quality attribute can be controlled independently. So, I think it is not
>> proper to integrate them
>> together.
>>
>> Noted, I will modified the min value of these 2 quality control.
>>
>>>> Aspeed JPEG Format requires an additional buffer, called bcd, to store
>>>> the information about which macro block in the new frame is different
>>>> from the previous one.
>>>>
>>>> To have bcd correctly working, we need to swap the buffers for src0/1 to
>>>> make src1 refer to previous frame and src0 to the coming new frame.
>>>>
>>>> Signed-off-by: Jammy Huang <jammy_huang@...eedtech.com>
>>>> ---
>>>> drivers/media/platform/aspeed-video.c | 222 +++++++++++++++++++++++---
>>>> 1 file changed, 203 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>>>> index cafbffe1ef69..94d17dee6f3d 100644
>>>> --- a/drivers/media/platform/aspeed-video.c
>>>> +++ b/drivers/media/platform/aspeed-video.c
>>>> @@ -32,6 +32,12 @@
>>>> #include <media/videobuf2-dma-contig.h>
>>>> #include <linux/videodev2.h>
>>>>
>>>> +#define ASPEED_CID_CUSTOM_BASE (V4L2_CID_USER_BASE | 0xf000)
>>> Driver-specific control ID ranges must be reserved in include/uapi/linux/v4l2-controls.h.
>>> See e.g. V4L2_CID_USER_ALLEGRO_BASE.
>> OKay, I will update in the next patch.
>>> Regards,
>>>
>>> Hans
>>>
>>>> +#define V4L2_CID_ASPEED_FORMAT (ASPEED_CID_CUSTOM_BASE + 1)
>>>> +#define V4L2_CID_ASPEED_COMPRESSION_MODE (ASPEED_CID_CUSTOM_BASE + 2)
>>>> +#define V4L2_CID_ASPEED_HQ_MODE (ASPEED_CID_CUSTOM_BASE + 3)
>>>> +#define V4L2_CID_ASPEED_HQ_JPEG_QUALITY (ASPEED_CID_CUSTOM_BASE + 4)
>>>> +
>>>> #define DEVICE_NAME "aspeed-video"
>>>>
>>>> #define ASPEED_VIDEO_JPEG_NUM_QUALITIES 12
>>>> @@ -55,6 +61,7 @@
>>>>
>>>> #define VE_MAX_SRC_BUFFER_SIZE 0x8ca000 /* 1920 * 1200, 32bpp */
>>>> #define VE_JPEG_HEADER_SIZE 0x006000 /* 512 * 12 * 4 */
>>>> +#define VE_BCD_BUFF_SIZE 0x100000
>>>>
>>>> #define VE_PROTECTION_KEY 0x000
>>>> #define VE_PROTECTION_KEY_UNLOCK 0x1a038aa8
>>>> @@ -108,6 +115,13 @@
>>>> #define VE_SCALING_FILTER2 0x020
>>>> #define VE_SCALING_FILTER3 0x024
>>>>
>>>> +#define VE_BCD_CTRL 0x02C
>>>> +#define VE_BCD_CTRL_EN_BCD BIT(0)
>>>> +#define VE_BCD_CTRL_EN_ABCD BIT(1)
>>>> +#define VE_BCD_CTRL_EN_CB BIT(2)
>>>> +#define VE_BCD_CTRL_THR GENMASK(23, 16)
>>>> +#define VE_BCD_CTRL_ABCD_THR GENMASK(31, 24)
>>>> +
>>>> #define VE_CAP_WINDOW 0x030
>>>> #define VE_COMP_WINDOW 0x034
>>>> #define VE_COMP_PROC_OFFSET 0x038
>>>> @@ -116,6 +130,7 @@
>>>> #define VE_SRC0_ADDR 0x044
>>>> #define VE_SRC_SCANLINE_OFFSET 0x048
>>>> #define VE_SRC1_ADDR 0x04c
>>>> +#define VE_BCD_ADDR 0x050
>>>> #define VE_COMP_ADDR 0x054
>>>>
>>>> #define VE_STREAM_BUF_SIZE 0x058
>>>> @@ -136,6 +151,8 @@
>>>> #define VE_COMP_CTRL_HQ_DCT_CHR GENMASK(26, 22)
>>>> #define VE_COMP_CTRL_HQ_DCT_LUM GENMASK(31, 27)
>>>>
>>>> +#define VE_CB_ADDR 0x06C
>>>> +
>>>> #define VE_OFFSET_COMP_STREAM 0x078
>>>>
>>>> #define VE_JPEG_COMP_SIZE_READ_BACK 0x084
>>>> @@ -243,10 +260,15 @@ struct aspeed_video {
>>>> unsigned int max_compressed_size;
>>>> struct aspeed_video_addr srcs[2];
>>>> struct aspeed_video_addr jpeg;
>>>> + struct aspeed_video_addr bcd;
>>>>
>>>> bool yuv420;
>>>> + bool partial_jpeg;
>>>> + bool hq_mode;
>>>> unsigned int frame_rate;
>>>> unsigned int jpeg_quality;
>>>> + unsigned int jpeg_hq_quality;
>>>> + unsigned int compression_mode;
>>>>
>>>> unsigned int frame_bottom;
>>>> unsigned int frame_left;
>>>> @@ -258,6 +280,13 @@ struct aspeed_video {
>>>>
>>>> #define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
>>>>
>>>> +static bool aspeed_video_alloc_buf(struct aspeed_video *video,
>>>> + struct aspeed_video_addr *addr,
>>>> + unsigned int size);
>>>> +
>>>> +static void aspeed_video_free_buf(struct aspeed_video *video,
>>>> + struct aspeed_video_addr *addr);
>>>> +
>>>> static const u32 aspeed_video_jpeg_header[ASPEED_VIDEO_JPEG_HEADER_SIZE] = {
>>>> 0xe0ffd8ff, 0x464a1000, 0x01004649, 0x60000101, 0x00006000, 0x0f00feff,
>>>> 0x00002d05, 0x00000000, 0x00000000, 0x00dbff00
>>>> @@ -492,6 +521,20 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
>>>> return -EBUSY;
>>>> }
>>>>
>>>> + if (video->partial_jpeg && !video->bcd.size) {
>>>> + if (!aspeed_video_alloc_buf(video, &video->bcd,
>>>> + VE_BCD_BUFF_SIZE)) {
>>>> + dev_err(video->dev, "Failed to allocate BCD buffer\n");
>>>> + dev_err(video->dev, "don't start frame\n");
>>>> + return -ENOMEM;
>>>> + }
>>>> + aspeed_video_write(video, VE_BCD_ADDR, video->bcd.dma);
>>>> + v4l2_dbg(1, debug, &video->v4l2_dev, "bcd addr(%#x) size(%d)\n",
>>>> + video->bcd.dma, video->bcd.size);
>>>> + } else if (!video->partial_jpeg && video->bcd.size) {
>>>> + aspeed_video_free_buf(video, &video->bcd);
>>>> + }
>>>> +
>>>> spin_lock_irqsave(&video->lock, flags);
>>>> buf = list_first_entry_or_null(&video->buffers,
>>>> struct aspeed_video_buffer, link);
>>>> @@ -635,6 +678,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
>>>>
>>>> if (sts & VE_INTERRUPT_COMP_COMPLETE) {
>>>> struct aspeed_video_buffer *buf;
>>>> + bool empty = true;
>>>> u32 frame_size = aspeed_video_read(video,
>>>> VE_JPEG_COMP_SIZE_READ_BACK);
>>>>
>>>> @@ -648,13 +692,23 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
>>>> if (buf) {
>>>> vb2_set_plane_payload(&buf->vb.vb2_buf, 0, frame_size);
>>>>
>>>> - if (!list_is_last(&buf->link, &video->buffers)) {
>>>> + /*
>>>> + * partial_jpeg requires continuous update.
>>>> + * On the contrary, standard jpeg can keep last buffer
>>>> + * to always have the latest result.
>>>> + */
>>>> + if (!video->partial_jpeg &&
>>>> + list_is_last(&buf->link, &video->buffers)) {
>>>> + empty = false;
>>>> + v4l2_warn(&video->v4l2_dev, "skip to keep last frame updated\n");
>>>> + } else {
>>>> buf->vb.vb2_buf.timestamp = ktime_get_ns();
>>>> buf->vb.sequence = video->sequence++;
>>>> buf->vb.field = V4L2_FIELD_NONE;
>>>> vb2_buffer_done(&buf->vb.vb2_buf,
>>>> VB2_BUF_STATE_DONE);
>>>> list_del(&buf->link);
>>>> + empty = list_empty(&video->buffers);
>>>> }
>>>> }
>>>> spin_unlock(&video->lock);
>>>> @@ -668,7 +722,18 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
>>>> aspeed_video_write(video, VE_INTERRUPT_STATUS,
>>>> VE_INTERRUPT_COMP_COMPLETE);
>>>> sts &= ~VE_INTERRUPT_COMP_COMPLETE;
>>>> - if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
>>>> +
>>>> + // swap src buffer if partial_jpeg
>>>> + if (video->partial_jpeg) {
>>>> + u32 src0, src1;
>>>> +
>>>> + src0 = aspeed_video_read(video, VE_SRC0_ADDR);
>>>> + src1 = aspeed_video_read(video, VE_SRC1_ADDR);
>>>> + aspeed_video_write(video, VE_SRC0_ADDR, src1);
>>>> + aspeed_video_write(video, VE_SRC1_ADDR, src0);
>>>> + }
>>>> +
>>>> + if (test_bit(VIDEO_STREAMING, &video->flags) && !empty)
>>>> aspeed_video_start_frame(video);
>>>> }
>>>>
>>>> @@ -931,10 +996,14 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
>>>> FIELD_PREP(VE_TGS_FIRST, video->frame_top) |
>>>> FIELD_PREP(VE_TGS_LAST,
>>>> video->frame_bottom + 1));
>>>> - aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
>>>> + aspeed_video_update(video, VE_CTRL,
>>>> + VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
>>>> + VE_CTRL_INT_DE);
>>>> } else {
>>>> v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
>>>> - aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
>>>> + aspeed_video_update(video, VE_CTRL,
>>>> + VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
>>>> + VE_CTRL_DIRECT_FETCH);
>>>> }
>>>>
>>>> size *= 4;
>>>> @@ -969,35 +1038,70 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
>>>>
>>>> static void aspeed_video_update_regs(struct aspeed_video *video)
>>>> {
>>>> - u32 comp_ctrl = VE_COMP_CTRL_RSVD |
>>>> - FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>>>> - FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
>>>> + static const char * const compress_mode_str[] = {"DCT Only",
>>>> + "DCT VQ mix 2-color", "DCT VQ mix 4-color"};
>>>> + u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>>>> + FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) |
>>>> + FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) |
>>>> + FIELD_PREP(VE_COMP_CTRL_HQ_DCT_LUM, video->jpeg_hq_quality) |
>>>> + FIELD_PREP(VE_COMP_CTRL_HQ_DCT_CHR, video->jpeg_hq_quality |
>>>> + 0x10);
>>>> u32 ctrl = 0;
>>>> - u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
>>>> + u32 seq_ctrl = 0;
>>>>
>>>> - v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
>>>> - video->frame_rate);
>>>> - v4l2_dbg(1, debug, &video->v4l2_dev, "subsample(%s)\n",
>>>> + v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n", video->frame_rate);
>>>> + v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s) subsample(%s)\n",
>>>> + video->partial_jpeg ? "partial" : "standard",
>>>> video->yuv420 ? "420" : "444");
>>>> - v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d)\n",
>>>> - video->jpeg_quality);
>>>> + v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d) hq(%s) hq_quality(%d)\n",
>>>> + video->jpeg_quality, video->hq_mode ? "on" : "off",
>>>> + video->jpeg_hq_quality);
>>>> + v4l2_dbg(1, debug, &video->v4l2_dev, "compression mode(%s)\n",
>>>> + compress_mode_str[video->compression_mode]);
>>>> +
>>>> + if (video->partial_jpeg)
>>>> + aspeed_video_update(video, VE_BCD_CTRL, 0, VE_BCD_CTRL_EN_BCD);
>>>> + else
>>>> + aspeed_video_update(video, VE_BCD_CTRL, VE_BCD_CTRL_EN_BCD, 0);
>>>>
>>>> if (video->frame_rate)
>>>> ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
>>>>
>>>> + if (!video->partial_jpeg) {
>>>> + comp_ctrl &= ~FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode);
>>>> + seq_ctrl |= VE_SEQ_CTRL_JPEG_MODE;
>>>> + }
>>>> +
>>>> if (video->yuv420)
>>>> seq_ctrl |= VE_SEQ_CTRL_YUV420;
>>>>
>>>> if (video->jpeg.virt)
>>>> aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
>>>>
>>>> +#ifdef CONFIG_MACH_ASPEED_G4
>>>> + switch (video->compression_mode) {
>>>> + case 0: //DCT only
>>>> + comp_ctrl |= VE_COMP_CTRL_VQ_DCT_ONLY;
>>>> + break;
>>>> + case 1: //DCT VQ mix 2-color
>>>> + comp_ctrl &= ~(VE_COMP_CTRL_VQ_4COLOR | VE_COMP_CTRL_VQ_DCT_ONLY);
>>>> + break;
>>>> + case 2: //DCT VQ mix 4-color
>>>> + comp_ctrl |= VE_COMP_CTRL_VQ_4COLOR;
>>>> + break;
>>>> + }
>>>> +#endif
>>>> +
>>>> /* Set control registers */
>>>> aspeed_video_update(video, VE_SEQ_CTRL,
>>>> VE_SEQ_CTRL_JPEG_MODE | VE_SEQ_CTRL_YUV420,
>>>> seq_ctrl);
>>>> aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
>>>> aspeed_video_update(video, VE_COMP_CTRL,
>>>> - VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
>>>> + VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR |
>>>> + VE_COMP_CTRL_EN_HQ | VE_COMP_CTRL_HQ_DCT_LUM |
>>>> + VE_COMP_CTRL_HQ_DCT_CHR | VE_COMP_CTRL_VQ_4COLOR |
>>>> + VE_COMP_CTRL_VQ_DCT_ONLY,
>>>> comp_ctrl);
>>>> }
>>>>
>>>> @@ -1029,6 +1133,8 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
>>>>
>>>> /* Set mode detection defaults */
>>>> aspeed_video_write(video, VE_MODE_DETECT, 0x22666500);
>>>> +
>>>> + aspeed_video_write(video, VE_BCD_CTRL, 0);
>>>> }
>>>>
>>>> static void aspeed_video_start(struct aspeed_video *video)
>>>> @@ -1062,6 +1168,9 @@ static void aspeed_video_stop(struct aspeed_video *video)
>>>> if (video->srcs[1].size)
>>>> aspeed_video_free_buf(video, &video->srcs[1]);
>>>>
>>>> + if (video->bcd.size)
>>>> + aspeed_video_free_buf(video, &video->bcd);
>>>> +
>>>> video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
>>>> video->flags = 0;
>>>> }
>>>> @@ -1364,6 +1473,28 @@ static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
>>>> if (test_bit(VIDEO_STREAMING, &video->flags))
>>>> aspeed_video_update_regs(video);
>>>> break;
>>>> + case V4L2_CID_ASPEED_FORMAT:
>>>> + video->partial_jpeg = ctrl->val;
>>>> + if (test_bit(VIDEO_STREAMING, &video->flags))
>>>> + aspeed_video_update_regs(video);
>>>> + break;
>>>> +#ifdef CONFIG_MACH_ASPEED_G4
>>>> + case V4L2_CID_ASPEED_COMPRESSION_MODE:
>>>> + video->compression_mode = ctrl->val;
>>>> + if (test_bit(VIDEO_STREAMING, &video->flags))
>>>> + aspeed_video_update_regs(video);
>>>> + break;
>>>> +#endif
>>>> + case V4L2_CID_ASPEED_HQ_MODE:
>>>> + video->hq_mode = ctrl->val;
>>>> + if (test_bit(VIDEO_STREAMING, &video->flags))
>>>> + aspeed_video_update_regs(video);
>>>> + break;
>>>> + case V4L2_CID_ASPEED_HQ_JPEG_QUALITY:
>>>> + video->jpeg_hq_quality = ctrl->val;
>>>> + if (test_bit(VIDEO_STREAMING, &video->flags))
>>>> + aspeed_video_update_regs(video);
>>>> + break;
>>>> default:
>>>> return -EINVAL;
>>>> }
>>>> @@ -1375,6 +1506,52 @@ static const struct v4l2_ctrl_ops aspeed_video_ctrl_ops = {
>>>> .s_ctrl = aspeed_video_set_ctrl,
>>>> };
>>>>
>>>> +static const struct v4l2_ctrl_config aspeed_ctrl_format = {
>>>> + .ops = &aspeed_video_ctrl_ops,
>>>> + .id = V4L2_CID_ASPEED_FORMAT,
>>>> + .name = "Aspeed JPEG Format",
>>>> + .type = V4L2_CTRL_TYPE_BOOLEAN,
>>>> + .min = false,
>>>> + .max = true,
>>>> + .step = 1,
>>>> + .def = false,
>>>> +};
>>>> +
>>>> +#ifdef CONFIG_MACH_ASPEED_G4
>>>> +static const struct v4l2_ctrl_config aspeed_ctrl_compression_mode = {
>>>> + .ops = &aspeed_video_ctrl_ops,
>>>> + .id = V4L2_CID_ASPEED_COMPRESSION_MODE,
>>>> + .name = "Aspeed Compression Mode",
>>>> + .type = V4L2_CTRL_TYPE_INTEGER,
>>>> + .min = 0,
>>>> + .max = 2,
>>>> + .step = 1,
>>>> + .def = 0,
>>>> +};
>>>> +#endif
>>>> +
>>>> +static const struct v4l2_ctrl_config aspeed_ctrl_HQ_mode = {
>>>> + .ops = &aspeed_video_ctrl_ops,
>>>> + .id = V4L2_CID_ASPEED_HQ_MODE,
>>>> + .name = "Aspeed HQ Mode",
>>>> + .type = V4L2_CTRL_TYPE_BOOLEAN,
>>>> + .min = false,
>>>> + .max = true,
>>>> + .step = 1,
>>>> + .def = false,
>>>> +};
>>>> +
>>>> +static const struct v4l2_ctrl_config aspeed_ctrl_HQ_jpeg_quality = {
>>>> + .ops = &aspeed_video_ctrl_ops,
>>>> + .id = V4L2_CID_ASPEED_HQ_JPEG_QUALITY,
>>>> + .name = "Aspeed HQ Quality",
>>>> + .type = V4L2_CTRL_TYPE_INTEGER,
>>>> + .min = 0,
>>>> + .max = ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1,
>>>> + .step = 1,
>>>> + .def = 0,
>>>> +};
>>>> +
>>>> static void aspeed_video_resolution_work(struct work_struct *work)
>>>> {
>>>> struct delayed_work *dwork = to_delayed_work(work);
>>>> @@ -1644,6 +1821,7 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>>> struct v4l2_device *v4l2_dev = &video->v4l2_dev;
>>>> struct vb2_queue *vbq = &video->queue;
>>>> struct video_device *vdev = &video->vdev;
>>>> + struct v4l2_ctrl_handler *hdl = &video->ctrl_handler;
>>>> int rc;
>>>>
>>>> video->pix_fmt.pixelformat = V4L2_PIX_FMT_JPEG;
>>>> @@ -1658,22 +1836,28 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>>> return rc;
>>>> }
>>>>
>>>> - v4l2_ctrl_handler_init(&video->ctrl_handler, 2);
>>>> - v4l2_ctrl_new_std(&video->ctrl_handler, &aspeed_video_ctrl_ops,
>>>> + v4l2_ctrl_handler_init(hdl, 6);
>>>> + v4l2_ctrl_new_std(hdl, &aspeed_video_ctrl_ops,
>>>> V4L2_CID_JPEG_COMPRESSION_QUALITY, 0,
>>>> ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1, 1, 0);
>>>> - v4l2_ctrl_new_std_menu(&video->ctrl_handler, &aspeed_video_ctrl_ops,
>>>> + v4l2_ctrl_new_std_menu(hdl, &aspeed_video_ctrl_ops,
>>>> V4L2_CID_JPEG_CHROMA_SUBSAMPLING,
>>>> V4L2_JPEG_CHROMA_SUBSAMPLING_420, mask,
>>>> V4L2_JPEG_CHROMA_SUBSAMPLING_444);
>>>> + v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_format, NULL);
>>>> +#ifdef CONFIG_MACH_ASPEED_G4
>>>> + v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_compression_mode, NULL);
>>>> +#endif
>>>> + v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_HQ_mode, NULL);
>>>> + v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_HQ_jpeg_quality, NULL);
>>>>
>>>> - rc = video->ctrl_handler.error;
>>>> + rc = hdl->error;
>>>> if (rc) {
>>>> dev_err(video->dev, "Failed to init controls: %d\n", rc);
>>>> goto err_ctrl_init;
>>>> }
>>>>
>>>> - v4l2_dev->ctrl_handler = &video->ctrl_handler;
>>>> + v4l2_dev->ctrl_handler = hdl;
>>>>
>>>> vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>>> vbq->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
>>>>
--
Best Regards
Jammy
Powered by blists - more mailing lists