[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 11 Nov 2021 22:13:12 +0530
From: Aswath Govindraju <a-govindraju@...com>
To: unlisted-recipients:; (no To-header on input)
CC: Vignesh Raghavendra <vigneshr@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Nishanth Menon <nm@...com>,
Aswath Govindraju <a-govindraju@...com>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>, <linux-can@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH RFC 2/2] phy: phy-can-transceiver: Add support for setting mux
On some boards, for routing CAN signals from controller to transceiver,
muxes might need to be set. Therefore, add support for setting the mux by
reading the mux-controls property from the device tree node.
Signed-off-by: Aswath Govindraju <a-govindraju@...com>
---
drivers/phy/phy-can-transceiver.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 6f3fe37dee0e..3d8da5226e27 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -10,6 +10,7 @@
#include<linux/module.h>
#include<linux/gpio.h>
#include<linux/gpio/consumer.h>
+#include <linux/mux/consumer.h>
struct can_transceiver_data {
u32 flags;
@@ -21,13 +22,22 @@ struct can_transceiver_phy {
struct phy *generic_phy;
struct gpio_desc *standby_gpio;
struct gpio_desc *enable_gpio;
+ struct mux_control *mux_ctrl;
};
/* Power on function */
static int can_transceiver_phy_power_on(struct phy *phy)
{
+ int ret;
struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
+ if (can_transceiver_phy->mux_ctrl) {
+ ret = mux_control_select(can_transceiver_phy->mux_ctrl, 1);
+ if (ret) {
+ dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
+ return ret;
+ }
+ }
if (can_transceiver_phy->standby_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
if (can_transceiver_phy->enable_gpio)
@@ -45,6 +55,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
if (can_transceiver_phy->enable_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
+ if (can_transceiver_phy->mux_ctrl)
+ mux_control_deselect(can_transceiver_phy->mux_ctrl);
return 0;
}
@@ -95,6 +107,15 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
drvdata = match->data;
+ if (of_property_read_bool(dev->of_node, "mux-controls")) {
+ struct mux_control *control;
+
+ control = devm_mux_control_get(dev, NULL);
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+ can_transceiver_phy->mux_ctrl = control;
+ }
+
phy = devm_phy_create(dev, dev->of_node,
&can_transceiver_phy_ops);
if (IS_ERR(phy)) {
--
2.17.1
Powered by blists - more mailing lists