[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdWmvPgAeS1o8aubaYBihuFrggoVkpT8XtnTZ6nq-VXn9A@mail.gmail.com>
Date: Fri, 12 Nov 2021 15:12:29 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc: Marc Zyngier <maz@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [RFC PATCH v3 0/7] Renesas RZ/G2L IRQC support
Hi Prabhakar,
On Wed, Nov 10, 2021 at 11:58 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> The RZ/G2L Interrupt Controller is a front-end for the GIC found on
> Renesas RZ/G2L SoC's with below pins:
> - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
> - GPIO pins used as external interrupt input pins out of GPIOINT0-122 a
> maximum of only 32 can be mapped to 32 GIC SPI interrupts,
> - NMI edge select.
>
> _____________
> | GIC |
> | ________ |
> ____________ | | | |
> NMI ------------------------------------>| | SPI0-479 | | GIC-600| |
> _______ | |------------>| | |
> | | | | PPI16-31 | | | |
> | | IRQ0-IRQ8 | IRQC |------------>| | |
IRQ0-IRQ7?
> P0_P48_4 ------>| GPIO |---------------->| | | |________| |
> | |GPIOINT0-122 | | | |
> | |---------------->| TINT0-31 | | |
> |______| |__________| |____________|
>
> The proposed RFC patches, add the IRQ domains in GPIO (pinctrl driver) and the
> IRQC driver. The IRQC domain handles the actual SPI interrupt and upon reception
> of the interrupt it propagates to the GPIO IRQ domain to handle virq.
> Out of GPIOINT0-122 only 32 can be mapped to GIC SPI, this mapping is handled by
> the IRQC driver.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists