[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YY6K/sJi9xZLmW+W@robh.at.kernel.org>
Date: Fri, 12 Nov 2021 09:40:46 -0600
From: Rob Herring <robh@...nel.org>
To: Wells Lu <wellslutw@...il.com>
Cc: linus.walleij@...aro.org, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
qinjian@...lus1.com, dvorkin@...bo.com,
Wells Lu <wells.lu@...plus.com>
Subject: Re: [PATCH v2 3/3] devicetree: bindings: pinctrl: Add bindings doc
for Sunplus SP7021.
On Mon, Nov 01, 2021 at 04:11:17PM +0800, Wells Lu wrote:
> Add bindings documentation for Sunplus SP7021.
Patch 2 and 3 can be combined. Use consistent subjects. Patch 2 is good.
This one is not.
>
> Signed-off-by: Wells Lu <wells.lu@...plus.com>
> ---
> Changes in v2:
> - None
>
> .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 277 +++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 278 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> new file mode 100644
> index 0000000..7cfa0ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> @@ -0,0 +1,277 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) Sunplus Co., Ltd. 2021
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sunplus SP7021 Pin Controller Device Tree Bindings
> +
> +maintainers:
> + - Dvorkin Dmitry <dvorkin@...bo.com>
> + - Wells Lu <wells.lu@...plus.com>
> +
> +description: |
> + The Sunplus SP7021 pin controller is used to control SoC pins. Please
> + refer to pinctrl-bindings.txt in this directory for details of the common
> + pinctrl bindings used by client devices.
> +
> + Refer to https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/pages/
> + 1443495991/How+to+setup+pins+of+SP7021+in+device-tree+source
> +
> + The device node of pin controller of Sunplus SP7021 has following
> + properties.
> +
> +properties:
> + compatible:
> + const: sunplus,sp7021-pctl
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + reg:
> + items:
> + - description: Base address and length of the MOON2 registers.
> + - description: Base address and length of the GPIOXT registers.
> + - description: Base address and length of the GPIOXT2 registers.
> + - description: Base address and length of the FIRST registers.
> + - description: Base address and length of the MOON1 registers.
> +
> + clocks:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> +patternProperties:
> + '^.*$':
> + if:
> + type: object
> + then:
For new bindings, don't use this hack. Make the node name something you
can match on (e.g. '-pins$').
> + description: |
> + A pinctrl node should contain at least one subnodes representing the
> + pins or function-pins group available on the machine. Each subnode
> + will list the pins it needs, and how they should be configured.
> +
> + Pinctrl node's client devices use subnodes for desired pin
> + configuration. Client device subnodes use below standard properties.
> +
> + properties:
> + pins:
> + description: |
> + Define pins which are used by pinctrl node's client device.
> +
> + It consists of one or more integers which represents the config
> + setting for corresponding pin. Please use macro SPPCTL_IOPAD to
> + define the integers for pins.
> +
> + The first argument of the macro is pin number, the second is pin
> + type, the third is type of GPIO, the last is default output state
> + of GPIO.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> + function:
> + description: |
> + Define pin-function which is used by pinctrl node's client device.
> + The name should be one of string in the following enumeration.
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
> + UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
> +
> + groups:
> + description: |
> + Define pin-group in a specified pin-function.
> + The name should be one of string in the following enumeration.
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
> + SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
> + HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
> +
> + zero_func:
> + description: |
> + Disabled pins which are not used by pinctrl node's client device.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> + additionalProperties: false
> +
> + allOf:
> + - if:
> + properties:
> + function:
> + enum:
> + - SPI_FLASH
> + then:
> + properties:
> + groups:
> + enum:
> + - SPI_FLASH1
> + - SPI_FLASH2
> + - if:
> + properties:
> + function:
> + enum:
> + - SPI_FLASH_4BIT
> + then:
> + properties:
> + groups:
> + enum:
> + - SPI_FLASH_4BIT1
> + - SPI_FLASH_4BIT2
> + - if:
> + properties:
> + function:
> + enum:
> + - SPI_NAND
> + then:
> + properties:
> + groups:
> + enum:
> + - SPI_NAND
> + - if:
> + properties:
> + function:
> + enum:
> + - CARD0_EMMC
> + then:
> + properties:
> + groups:
> + enum:
> + - CARD0_EMMC
> + - if:
> + properties:
> + function:
> + enum:
> + - SD_CARD
> + then:
> + properties:
> + groups:
> + enum:
> + - SD_CARD
> + - if:
> + properties:
> + function:
> + enum:
> + - UA0
> + then:
> + properties:
> + groups:
> + enum:
> + - UA0
> + - if:
> + properties:
> + function:
> + enum:
> + - FPGA_IFX
> + then:
> + properties:
> + groups:
> + enum:
> + - FPGA_IFX
> + - if:
> + properties:
> + function:
> + enum:
> + - HDMI_TX
> + then:
> + properties:
> + groups:
> + enum:
> + - HDMI_TX1
> + - HDMI_TX2
> + - HDMI_TX3
> + - if:
> + properties:
> + function:
> + enum:
> + - LCDIF
> + then:
> + properties:
> + groups:
> + enum:
> + - LCDIF
> + - if:
> + properties:
> + function:
> + enum:
> + - USB0_OTG
> + then:
> + properties:
> + groups:
> + enum:
> + - USB0_OTG
> + - if:
> + properties:
> + function:
> + enum:
> + - USB1_OTG
> + then:
> + properties:
> + groups:
> + enum:
> + - USB1_OTG
> +
> +required:
> + - compatible
> + - reg
> + - "#gpio-cells"
> + - gpio-controller
> + - clocks
> + - resets
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/sp-sp7021.h>
> + #include <dt-bindings/reset/sp-sp7021.h>
> + #include <dt-bindings/pinctrl/sppctl-sp7021.h>
> +
> + pctl: pctl@...00100 {
pinctl@...00100
> + compatible = "sunplus,sp7021-pctl";
> + reg = <0x9C000100 0x100>, <0x9C000300 0x80>, <0x9C000380 0x80>,
> + <0x9C0032e4 0x1C>, <0x9C000080 0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + clocks = <&clkc GPIO>;
> + resets = <&rstc RST_GPIO>;
> +
> + pins_uart0: pins_uart0 {
> + function = "UA0";
> + groups = "UA0";
> + };
> +
> + pins_uart1: pins_uart1 {
> + pins = <
> + SPPCTL_IOPAD(11,SPPCTL_PCTL_G_PMUX,MUXF_UA1_TX,0)
> + SPPCTL_IOPAD(10,SPPCTL_PCTL_G_PMUX,MUXF_UA1_RX,0)
> + SPPCTL_IOPAD(7,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT)
> + >;
> + };
> +
> + emmc_mux: emmc_mux {
> + function = "CARD0_EMMC";
> + groups = "CARD0_EMMC";
> + };
> +
> + mmc1_mux: mmc1_mux {
> + function = "SD_CARD";
> + groups = "SD_CARD";
> + pins = < SPPCTL_IOPAD(91,SPPCTL_PCTL_G_GPIO,0,0) >;
> + };
> +
> + hdmi_A_tx1: hdmi_A_tx1_pins {
> + function = "HDMI_TX";
> + groups = "HDMI_TX1";
> + };
> + hdmi_A_tx2: hdmi_A_tx2_pins {
> + function = "HDMI_TX";
> + groups = "HDMI_TX2";
> + };
> + hdmi_A_tx3: hdmi_A_tx3_pins {
> + function = "HDMI_TX";
> + groups = "HDMI_TX3";
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index da6378f..11835e7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14872,6 +14872,7 @@ M: Wells Lu <wells.lu@...plus.com>
> L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers)
> S: Maintained
> W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
> +F: Documentation/devicetree/bindings/pinctrl/sunplus,*
> F: drivers/pinctrl/sunplus/
> F: include/dt-bindings/pinctrl/sppctl*
>
> --
> 2.7.4
>
>
Powered by blists - more mailing lists