[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211112162827.128319-4-aouledameur@baylibre.com>
Date: Fri, 12 Nov 2021 17:28:27 +0100
From: Amjad Ouled-Ameur <aouledameur@...libre.com>
To: khilman@...libre.com
Cc: Amjad Ouled-Ameur <aouledameur@...libre.com>,
p.zabel@...gutronix.de, balbi@...nel.org, jbrunet@...libre.com,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org
Subject: [PATCH v3 3/3] phy: amlogic: meson8b-usb2: fix shared reset control use
Use reset_control_rearm() call if an error occurs in case
phy_meson8b_usb2_power_on() fails after reset() has been called, or in
case phy_meson8b_usb2_power_off() is called i.e the resource is no longer
used and the reset line may be triggered again by other devices.
reset_control_rearm() keeps use of triggered_count sane in the reset
framework, use of reset_control_reset() on shared reset line should
be balanced with reset_control_rearm().
Signed-off-by: Amjad Ouled-Ameur <aouledameur@...libre.com>
Reported-by: Jerome Brunet <jbrunet@...libre.com>
---
drivers/phy/amlogic/phy-meson8b-usb2.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index cf10bed40528..a6e74288ca8f 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -154,6 +154,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
ret = clk_prepare_enable(priv->clk_usb_general);
if (ret) {
dev_err(&phy->dev, "Failed to enable USB general clock\n");
+ reset_control_rearm(priv->reset);
return ret;
}
@@ -161,6 +162,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
if (ret) {
dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
clk_disable_unprepare(priv->clk_usb_general);
+ reset_control_rearm(priv->reset);
return ret;
}
@@ -199,6 +201,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
dev_warn(&phy->dev, "USB ID detect failed!\n");
clk_disable_unprepare(priv->clk_usb);
clk_disable_unprepare(priv->clk_usb_general);
+ reset_control_rearm(priv->reset);
return -EINVAL;
}
}
@@ -218,6 +221,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)
clk_disable_unprepare(priv->clk_usb);
clk_disable_unprepare(priv->clk_usb_general);
+ reset_control_rearm(priv->reset);
/* power off the PHY by putting it into reset mode */
regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
--
2.25.1
Powered by blists - more mailing lists