| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211112204927.8830-4-Sergey.Semin@baikalelectronics.ru>
Date: Fri, 12 Nov 2021 23:49:26 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Serge Semin <fancer.lancer@...il.com>,
Mark Brown <broonie@...nel.org>,
Nandhini Srikandan <nandhini.srikandan@...el.com>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Andy Shevchenko <andy@...nel.org>, <linux-spi@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 3/4] spi: dw: Convert to using the Bitfield access macros
The driver has been using the offset/bitwise-shift-based approach for the
CSR fields R/W operations since it was merged into the kernel. It can be
simplified by using the macros defined in the linux/bitfield.h and
linux/bit.h header files like BIT(), GENMASK(), FIELD_PREP(), FIELD_GET(),
etc where it is required, for instance in the cached cr0 preparation
method. Thus in order to have the FIELD_*()-macros utilized we just need
to convert the macros with the CSR-fields offsets to the masks with the
corresponding registers fields definition. That's where the GENMASK() and
BIT() macros come in handy. After that the masks can be used in the
FIELD_*()-macros where it's appropriate.
We also need to convert the macros with the CRS-bit flags using the manual
bitwise shift operations (x << y) to using the BIT() macro. Thus we'll
have a more coherent set of the CSR-related macros.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
drivers/spi/spi-dw-core.c | 31 +++++++++++--------
drivers/spi/spi-dw.h | 64 +++++++++++++++++++--------------------
2 files changed, 50 insertions(+), 45 deletions(-)
diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 4d91ffb5c0d8..b4cbcd38eaba 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -5,6 +5,7 @@
* Copyright (c) 2009, Intel Corporation.
*/
+#include <linux/bitfield.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/module.h>
@@ -254,7 +255,7 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id)
{
struct spi_controller *master = dev_id;
struct dw_spi *dws = spi_controller_get_devdata(master);
- u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f;
+ u16 irq_status = dw_readl(dws, DW_SPI_ISR) & DW_SPI_INT_MASK;
if (!irq_status)
return IRQ_NONE;
@@ -273,32 +274,38 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi)
if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) {
/* CTRLR0[ 5: 4] Frame Format */
- cr0 |= DW_SPI_CTRLR0_FRF_MOTO_SPI << DW_PSSI_CTRLR0_FRF_OFFSET;
+ cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI);
/*
* SPI mode (SCPOL|SCPH)
* CTRLR0[ 6] Serial Clock Phase
* CTRLR0[ 7] Serial Clock Polarity
*/
- cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DW_PSSI_CTRLR0_SCOL_OFFSET;
- cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DW_PSSI_CTRLR0_SCPH_OFFSET;
+ if (spi->mode & SPI_CPOL)
+ cr0 |= DW_PSSI_CTRLR0_SCPOL;
+ if (spi->mode & SPI_CPHA)
+ cr0 |= DW_PSSI_CTRLR0_SCPHA;
/* CTRLR0[11] Shift Register Loop */
- cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DW_PSSI_CTRLR0_SRL_OFFSET;
+ if (spi->mode & SPI_LOOP)
+ cr0 |= DW_PSSI_CTRLR0_SRL;
} else {
/* CTRLR0[ 7: 6] Frame Format */
- cr0 |= DW_SPI_CTRLR0_FRF_MOTO_SPI << DW_HSSI_CTRLR0_FRF_OFFSET;
+ cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI);
/*
* SPI mode (SCPOL|SCPH)
* CTRLR0[ 8] Serial Clock Phase
* CTRLR0[ 9] Serial Clock Polarity
*/
- cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DW_HSSI_CTRLR0_SCPOL_OFFSET;
- cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DW_HSSI_CTRLR0_SCPH_OFFSET;
+ if (spi->mode & SPI_CPOL)
+ cr0 |= DW_HSSI_CTRLR0_SCPOL;
+ if (spi->mode & SPI_CPHA)
+ cr0 |= DW_HSSI_CTRLR0_SCPHA;
/* CTRLR0[13] Shift Register Loop */
- cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DW_HSSI_CTRLR0_SRL_OFFSET;
+ if (spi->mode & SPI_LOOP)
+ cr0 |= DW_HSSI_CTRLR0_SRL;
if (dws->caps & DW_SPI_CAP_KEEMBAY_MST)
cr0 |= DW_HSSI_CTRLR0_KEEMBAY_MST;
@@ -320,10 +327,10 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
if (!(dws->caps & DW_SPI_CAP_DWC_HSSI))
/* CTRLR0[ 9:8] Transfer Mode */
- cr0 |= cfg->tmode << DW_PSSI_CTRLR0_TMOD_OFFSET;
+ cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_TMOD_MASK, cfg->tmode);
else
/* CTRLR0[11:10] Transfer Mode */
- cr0 |= cfg->tmode << DW_HSSI_CTRLR0_TMOD_OFFSET;
+ cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_TMOD_MASK, cfg->tmode);
dw_writel(dws, DW_SPI_CTRLR0, cr0);
@@ -850,7 +857,7 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws)
if (!(cr0 & DW_PSSI_CTRLR0_DFS_MASK)) {
dws->caps |= DW_SPI_CAP_DFS32;
- dws->dfs_offset = DW_PSSI_CTRLR0_DFS32_OFFSET;
+ dws->dfs_offset = __bf_shf(DW_PSSI_CTRLR0_DFS32_MASK);
dev_dbg(dev, "Detected 32-bits max data frame size\n");
}
} else {
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 893b78c43a50..634085eadad1 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -41,39 +41,36 @@
#define DW_SPI_CS_OVERRIDE 0xf4
/* Bit fields in CTRLR0 (DWC APB SSI) */
-#define DW_PSSI_CTRLR0_DFS_OFFSET 0
#define DW_PSSI_CTRLR0_DFS_MASK GENMASK(3, 0)
-#define DW_PSSI_CTRLR0_DFS32_OFFSET 16
+#define DW_PSSI_CTRLR0_DFS32_MASK GENMASK(20, 16)
-#define DW_PSSI_CTRLR0_FRF_OFFSET 4
+#define DW_PSSI_CTRLR0_FRF_MASK GENMASK(5, 4)
#define DW_SPI_CTRLR0_FRF_MOTO_SPI 0x0
#define DW_SPI_CTRLR0_FRF_TI_SSP 0x1
#define DW_SPI_CTRLR0_FRF_NS_MICROWIRE 0x2
#define DW_SPI_CTRLR0_FRF_RESV 0x3
-#define DW_PSSI_CTRLR0_MODE_OFFSET 6
-#define DW_PSSI_CTRLR0_SCPH_OFFSET 6
-#define DW_PSSI_CTRLR0_SCOL_OFFSET 7
+#define DW_PSSI_CTRLR0_MODE_MASK GENMASK(7, 6)
+#define DW_PSSI_CTRLR0_SCPHA BIT(6)
+#define DW_PSSI_CTRLR0_SCPOL BIT(7)
-#define DW_PSSI_CTRLR0_TMOD_OFFSET 8
-#define DW_PSSI_CTRLR0_TMOD_MASK (0x3 << DW_PSSI_CTRLR0_TMOD_OFFSET)
+#define DW_PSSI_CTRLR0_TMOD_MASK GENMASK(9, 8)
#define DW_SPI_CTRLR0_TMOD_TR 0x0 /* xmit & recv */
#define DW_SPI_CTRLR0_TMOD_TO 0x1 /* xmit only */
#define DW_SPI_CTRLR0_TMOD_RO 0x2 /* recv only */
#define DW_SPI_CTRLR0_TMOD_EPROMREAD 0x3 /* eeprom read mode */
-#define DW_PSSI_CTRLR0_SLVOE_OFFSET 10
-#define DW_PSSI_CTRLR0_SRL_OFFSET 11
-#define DW_PSSI_CTRLR0_CFS_OFFSET 12
+#define DW_PSSI_CTRLR0_SLV_OE BIT(10)
+#define DW_PSSI_CTRLR0_SRL BIT(11)
+#define DW_PSSI_CTRLR0_CFS BIT(12)
/* Bit fields in CTRLR0 (DWC SSI with AHB interface) */
-#define DW_HSSI_CTRLR0_SRL_OFFSET 13
-#define DW_HSSI_CTRLR0_TMOD_OFFSET 10
+#define DW_HSSI_CTRLR0_DFS_MASK GENMASK(4, 0)
+#define DW_HSSI_CTRLR0_FRF_MASK GENMASK(7, 6)
+#define DW_HSSI_CTRLR0_SCPHA BIT(8)
+#define DW_HSSI_CTRLR0_SCPOL BIT(9)
#define DW_HSSI_CTRLR0_TMOD_MASK GENMASK(11, 10)
-#define DW_HSSI_CTRLR0_SCPOL_OFFSET 9
-#define DW_HSSI_CTRLR0_SCPH_OFFSET 8
-#define DW_HSSI_CTRLR0_FRF_OFFSET 6
-#define DW_HSSI_CTRLR0_DFS_OFFSET 0
+#define DW_HSSI_CTRLR0_SRL BIT(13)
/*
* For Keem Bay, CTRLR0[31] is used to select controller mode.
@@ -86,26 +83,27 @@
#define DW_SPI_NDF_MASK GENMASK(15, 0)
/* Bit fields in SR, 7 bits */
-#define DW_SPI_SR_MASK 0x7f /* cover 7 bits */
-#define DW_SPI_SR_BUSY (1 << 0)
-#define DW_SPI_SR_TF_NOT_FULL (1 << 1)
-#define DW_SPI_SR_TF_EMPT (1 << 2)
-#define DW_SPI_SR_RF_NOT_EMPT (1 << 3)
-#define DW_SPI_SR_RF_FULL (1 << 4)
-#define DW_SPI_SR_TX_ERR (1 << 5)
-#define DW_SPI_SR_DCOL (1 << 6)
+#define DW_SPI_SR_MASK GENMASK(6, 0)
+#define DW_SPI_SR_BUSY BIT(0)
+#define DW_SPI_SR_TF_NOT_FULL BIT(1)
+#define DW_SPI_SR_TF_EMPT BIT(2)
+#define DW_SPI_SR_RF_NOT_EMPT BIT(3)
+#define DW_SPI_SR_RF_FULL BIT(4)
+#define DW_SPI_SR_TX_ERR BIT(5)
+#define DW_SPI_SR_DCOL BIT(6)
/* Bit fields in ISR, IMR, RISR, 7 bits */
-#define DW_SPI_INT_TXEI (1 << 0)
-#define DW_SPI_INT_TXOI (1 << 1)
-#define DW_SPI_INT_RXUI (1 << 2)
-#define DW_SPI_INT_RXOI (1 << 3)
-#define DW_SPI_INT_RXFI (1 << 4)
-#define DW_SPI_INT_MSTI (1 << 5)
+#define DW_SPI_INT_MASK GENMASK(5, 0)
+#define DW_SPI_INT_TXEI BIT(0)
+#define DW_SPI_INT_TXOI BIT(1)
+#define DW_SPI_INT_RXUI BIT(2)
+#define DW_SPI_INT_RXOI BIT(3)
+#define DW_SPI_INT_RXFI BIT(4)
+#define DW_SPI_INT_MSTI BIT(5)
/* Bit fields in DMACR */
-#define DW_SPI_DMACR_RDMAE (1 << 0)
-#define DW_SPI_DMACR_TDMAE (1 << 1)
+#define DW_SPI_DMACR_RDMAE BIT(0)
+#define DW_SPI_DMACR_TDMAE BIT(1)
/* Mem/DMA operations helpers */
#define DW_SPI_WAIT_RETRIES 5
--
2.33.0
Powered by blists - more mailing lists