[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211114170335.66994-3-hdegoede@redhat.com>
Date: Sun, 14 Nov 2021 18:03:17 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: "Rafael J . Wysocki" <rjw@...ysocki.net>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Mark Gross <markgross@...nel.org>,
Andy Shevchenko <andy@...radead.org>,
Wolfram Sang <wsa@...-dreams.de>,
Sebastian Reichel <sre@...nel.org>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Ard Biesheuvel <ardb@...nel.org>
Cc: Hans de Goede <hdegoede@...hat.com>, Len Brown <lenb@...nel.org>,
linux-acpi@...r.kernel.org, Yauhen Kharuzhy <jekhor@...il.com>,
Tsuchiya Yuto <kitakar@...il.com>,
platform-driver-x86@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-efi@...r.kernel.org
Subject: [PATCH v2 02/20] power: supply: bq25890: Fix ADC continuous conversion setting when charging
From: Yauhen Kharuzhy <jekhor@...il.com>
Instead of one shot run of ADC at beginning of charging, run continuous
conversion to ensure that all charging-related values are monitored
properly (input voltage, input current, themperature etc.).
Fixes: 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip")
Signed-off-by: Yauhen Kharuzhy <jekhor@...il.com>
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
drivers/power/supply/bq25890_charger.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index 34ec186a2e9a..b7eac5428083 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -581,12 +581,12 @@ static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
if (!new_state.online && bq->state.online) { /* power removed */
/* disable ADC */
- ret = bq25890_field_write(bq, F_CONV_START, 0);
+ ret = bq25890_field_write(bq, F_CONV_RATE, 0);
if (ret < 0)
goto error;
} else if (new_state.online && !bq->state.online) { /* power inserted */
/* enable ADC, to have control of charge current/voltage */
- ret = bq25890_field_write(bq, F_CONV_START, 1);
+ ret = bq25890_field_write(bq, F_CONV_RATE, 1);
if (ret < 0)
goto error;
}
--
2.31.1
Powered by blists - more mailing lists