| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211114012755.112226-14-konrad.dybcio@somainline.org>
Date: Sun, 14 Nov 2021 02:27:53 +0100
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: ~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 14/16] arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes
Based on current driver availability, add either nodes or comments regarding
peripherals connected via I2C/SPI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
---
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 101 ++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b50f04ffee95..c44376aa0742 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -75,6 +75,93 @@ ramoops@...00000 {
};
};
+&i2c1 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ cs35l41_l: cs35l41@40 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x40>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+
+ cs35l41_r: cs35l41@41 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+ /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c15 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
&pmk8350_rtc {
status = "okay";
};
@@ -100,8 +187,22 @@ &qupv3_id_2 {
status = "okay";
};
+&spi14 {
+ status = "okay";
+
+ /* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
&tlmm {
gpio-reserved-ranges = <44 4>;
+
+ ts_int_default: ts-int-default {
+ pin = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
};
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
--
2.33.1
Powered by blists - more mailing lists