| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211115165353.466357003@linuxfoundation.org>
Date: Mon, 15 Nov 2021 18:00:05 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Sriram R <srirrama@...eaurora.org>,
Jouni Malinen <jouni@...eaurora.org>,
Kalle Valo <kvalo@...eaurora.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 280/575] ath11k: Avoid race during regd updates
From: Sriram R <srirrama@...eaurora.org>
[ Upstream commit 1db2b0d0a39102238fcbf9092cefa65a710642e9 ]
Whenever ath11k is bootup with a user country already set, cfg80211
notifies this country info to ath11k soon after registration, where the
notification is sent to the firmware for fetching the rules of this user
country input.
Multiple race conditions could be seen in this scenario where a new
request is either lost as pointed in [1] or a new regd overwrites the
default regd provided by the firmware during bootup. Note that, the
default regd is used for intersection purpose and hence it should not be
overwritten.
The main reason as pointed by [1] is the usage of ATH11K_FLAG_REGISTERED
flag which is updated after completion of core registration, whereas the
reg notification from cfg80211 and wmi events for the corresponding
request can happen much before that. Since the ATH11K_FLAG_REGISTERED is
currently used to determine if the event containing reg rules belong to
default regd or for user request, there is a possibility of the default
regd getting overwritten.
Since the default reg rules will be received only once per pdev on
firmware load, the above flag based check can be replaced with a check
to see if default_regd is already set, so that we can now always update
the new_regd. Also if the new_regd is set, this will be always used to
update the reg rules for the registered phy.
[1] https://patchwork.kernel.org/project/linux-wireless/patch/1829665.1PRlr7bOQj@ripper/
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sriram R <srirrama@...eaurora.org>
Signed-off-by: Jouni Malinen <jouni@...eaurora.org>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-4-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
drivers/net/wireless/ath/ath11k/reg.c | 11 ++++++-----
drivers/net/wireless/ath/ath11k/reg.h | 2 +-
drivers/net/wireless/ath/ath11k/wmi.c | 16 ++++++----------
4 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 63d70aecbd0f1..0924bc8b35205 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -6320,7 +6320,7 @@ static int __ath11k_mac_register(struct ath11k *ar)
ar->hw->wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MONITOR);
/* Apply the regd received during initialization */
- ret = ath11k_regd_update(ar, true);
+ ret = ath11k_regd_update(ar);
if (ret) {
ath11k_err(ar->ab, "ath11k regd update failed: %d\n", ret);
goto err_unregister_hw;
diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 678d0885fcee7..b8f9f34408879 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -198,7 +198,7 @@ static void ath11k_copy_regd(struct ieee80211_regdomain *regd_orig,
sizeof(struct ieee80211_reg_rule));
}
-int ath11k_regd_update(struct ath11k *ar, bool init)
+int ath11k_regd_update(struct ath11k *ar)
{
struct ieee80211_regdomain *regd, *regd_copy = NULL;
int ret, regd_len, pdev_id;
@@ -209,7 +209,10 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
spin_lock_bh(&ab->base_lock);
- if (init) {
+ /* Prefer the latest regd update over default if it's available */
+ if (ab->new_regd[pdev_id]) {
+ regd = ab->new_regd[pdev_id];
+ } else {
/* Apply the regd received during init through
* WMI_REG_CHAN_LIST_CC event. In case of failure to
* receive the regd, initialize with a default world
@@ -222,8 +225,6 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
"failed to receive default regd during init\n");
regd = (struct ieee80211_regdomain *)&ath11k_world_regd;
}
- } else {
- regd = ab->new_regd[pdev_id];
}
if (!regd) {
@@ -680,7 +681,7 @@ void ath11k_regd_update_work(struct work_struct *work)
regd_update_work);
int ret;
- ret = ath11k_regd_update(ar, false);
+ ret = ath11k_regd_update(ar);
if (ret) {
/* Firmware has already moved to the new regd. We need
* to maintain channel consistency across FW, Host driver
diff --git a/drivers/net/wireless/ath/ath11k/reg.h b/drivers/net/wireless/ath/ath11k/reg.h
index 39b7fc9435415..7dbbba9fae1d2 100644
--- a/drivers/net/wireless/ath/ath11k/reg.h
+++ b/drivers/net/wireless/ath/ath11k/reg.h
@@ -30,6 +30,6 @@ void ath11k_regd_update_work(struct work_struct *work);
struct ieee80211_regdomain *
ath11k_reg_build_regd(struct ath11k_base *ab,
struct cur_regulatory_info *reg_info, bool intersect);
-int ath11k_regd_update(struct ath11k *ar, bool init);
+int ath11k_regd_update(struct ath11k *ar);
int ath11k_reg_update_chan_list(struct ath11k *ar);
#endif
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index cf0f778b0cbc9..e17419c8dde0d 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5410,10 +5410,10 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
}
spin_lock(&ab->base_lock);
- if (test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags)) {
- /* Once mac is registered, ar is valid and all CC events from
- * fw is considered to be received due to user requests
- * currently.
+ if (ab->default_regd[pdev_idx]) {
+ /* The initial rules from FW after WMI Init is to build
+ * the default regd. From then on, any rules updated for
+ * the pdev could be due to user reg changes.
* Free previously built regd before assigning the newly
* generated regd to ar. NULL pointer handling will be
* taken care by kfree itself.
@@ -5423,13 +5423,9 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
ab->new_regd[pdev_idx] = regd;
ieee80211_queue_work(ar->hw, &ar->regd_update_work);
} else {
- /* Multiple events for the same *ar is not expected. But we
- * can still clear any previously stored default_regd if we
- * are receiving this event for the same radio by mistake.
- * NULL pointer handling will be taken care by kfree itself.
+ /* This regd would be applied during mac registration and is
+ * held constant throughout for regd intersection purpose
*/
- kfree(ab->default_regd[pdev_idx]);
- /* This regd would be applied during mac registration */
ab->default_regd[pdev_idx] = regd;
}
ab->dfs_region = reg_info->dfs_region;
--
2.33.0
Powered by blists - more mailing lists