[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211115165359.014355722@linuxfoundation.org>
Date: Mon, 15 Nov 2021 18:02:46 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Stephen Boyd <swboyd@...omium.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 441/575] soc: qcom: rpmhpd: Make power_on actually enable the domain
From: Bjorn Andersson <bjorn.andersson@...aro.org>
[ Upstream commit e3e56c050ab6e3f1bd811f0787f50709017543e4 ]
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.
But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().
But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.
Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.
The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/soc/qcom/rpmhpd.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index e7cb40144f9b1..436ec79122ed2 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -30,6 +30,7 @@
* @active_only: True if it represents an Active only peer
* @corner: current corner
* @active_corner: current active corner
+ * @enable_corner: lowest non-zero corner
* @level: An array of level (vlvl) to corner (hlvl) mappings
* derived from cmd-db
* @level_count: Number of levels supported by the power domain. max
@@ -47,6 +48,7 @@ struct rpmhpd {
const bool active_only;
unsigned int corner;
unsigned int active_corner;
+ unsigned int enable_corner;
u32 level[RPMH_ARC_MAX_LEVELS];
size_t level_count;
bool enabled;
@@ -295,13 +297,13 @@ static int rpmhpd_aggregate_corner(struct rpmhpd *pd, unsigned int corner)
static int rpmhpd_power_on(struct generic_pm_domain *domain)
{
struct rpmhpd *pd = domain_to_rpmhpd(domain);
- int ret = 0;
+ unsigned int corner;
+ int ret;
mutex_lock(&rpmhpd_lock);
- if (pd->corner)
- ret = rpmhpd_aggregate_corner(pd, pd->corner);
-
+ corner = max(pd->corner, pd->enable_corner);
+ ret = rpmhpd_aggregate_corner(pd, corner);
if (!ret)
pd->enabled = true;
@@ -346,6 +348,10 @@ static int rpmhpd_set_performance_state(struct generic_pm_domain *domain,
i--;
if (pd->enabled) {
+ /* Ensure that the domain isn't turn off */
+ if (i < pd->enable_corner)
+ i = pd->enable_corner;
+
ret = rpmhpd_aggregate_corner(pd, i);
if (ret)
goto out;
@@ -382,6 +388,10 @@ static int rpmhpd_update_level_mapping(struct rpmhpd *rpmhpd)
for (i = 0; i < rpmhpd->level_count; i++) {
rpmhpd->level[i] = buf[i];
+ /* Remember the first corner with non-zero level */
+ if (!rpmhpd->level[rpmhpd->enable_corner] && rpmhpd->level[i])
+ rpmhpd->enable_corner = i;
+
/*
* The AUX data may be zero padded. These 0 valued entries at
* the end of the map must be ignored.
--
2.33.0
Powered by blists - more mailing lists