| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211115150344.sgrqqnl7nudntrqx@mobilestation>
Date: Mon, 15 Nov 2021 18:03:44 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Mark Brown <broonie@...nel.org>,
Nandhini Srikandan <nandhini.srikandan@...el.com>,
Andy Shevchenko <andy@...nel.org>, linux-spi@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/6] spi: dw: Add a symbols namespace for the core
module
On Mon, Nov 15, 2021 at 04:27:10PM +0200, Andy Shevchenko wrote:
> On Mon, Nov 15, 2021 at 01:30:21AM +0300, Serge Semin wrote:
> > The exported from the DW SPI driver core symbols are only used by the
> > spi-dw-{dma,mmio,pci,bt1}.o objects. Add these symbols to a separate
> > namespace then and make sure the depended modules have it imported.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
> > Suggested-by: Andy Shevchenko <andy.shevchenko@...il.com>
>
> Thanks!
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
>
> See also below.
Thanks. But see below.
>
> > ---
> >
> > Changelog v2:
> > - This is a new patch created as of Andy' suggestion.
> > ---
> > drivers/spi/spi-dw-bt1.c | 1 +
> > drivers/spi/spi-dw-core.c | 14 +++++++-------
> > drivers/spi/spi-dw-dma.c | 7 +++++--
> > drivers/spi/spi-dw-mmio.c | 1 +
> > drivers/spi/spi-dw-pci.c | 1 +
> > 5 files changed, 15 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c
> > index 5be6b7b80c21..ac7e4f30d1da 100644
> > --- a/drivers/spi/spi-dw-bt1.c
> > +++ b/drivers/spi/spi-dw-bt1.c
> > @@ -339,3 +339,4 @@ module_platform_driver(dw_spi_bt1_driver);
> > MODULE_AUTHOR("Serge Semin <Sergey.Semin@...kalelectronics.ru>");
> > MODULE_DESCRIPTION("Baikal-T1 System Boot SPI Controller driver");
> > MODULE_LICENSE("GPL v2");
> > +MODULE_IMPORT_NS(SPI_DW_CORE);
> > diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> > index a305074c482e..a14940403ab4 100644
> > --- a/drivers/spi/spi-dw-core.c
> > +++ b/drivers/spi/spi-dw-core.c
> > @@ -106,7 +106,7 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
> > else
> > dw_writel(dws, DW_SPI_SER, 0);
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_set_cs);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_set_cs, SPI_DW_CORE);
> >
> > /* Return the max entries we can fill into tx fifo */
> > static inline u32 tx_max(struct dw_spi *dws)
> > @@ -210,7 +210,7 @@ int dw_spi_check_status(struct dw_spi *dws, bool raw)
> >
> > return ret;
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_check_status);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_check_status, SPI_DW_CORE);
> >
> > static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws)
> > {
> > @@ -345,7 +345,7 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
> > dws->cur_rx_sample_dly = chip->rx_sample_dly;
> > }
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_update_config);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_update_config, SPI_DW_CORE);
> >
> > static void dw_spi_irq_setup(struct dw_spi *dws)
> > {
> > @@ -945,7 +945,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
> > spi_controller_put(master);
> > return ret;
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_add_host);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_add_host, SPI_DW_CORE);
> >
> > void dw_spi_remove_host(struct dw_spi *dws)
> > {
> > @@ -960,7 +960,7 @@ void dw_spi_remove_host(struct dw_spi *dws)
> >
> > free_irq(dws->irq, dws->master);
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_remove_host);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_remove_host, SPI_DW_CORE);
> >
> > int dw_spi_suspend_host(struct dw_spi *dws)
> > {
> > @@ -973,14 +973,14 @@ int dw_spi_suspend_host(struct dw_spi *dws)
> > spi_shutdown_chip(dws);
> > return 0;
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_suspend_host, SPI_DW_CORE);
> >
> > int dw_spi_resume_host(struct dw_spi *dws)
> > {
> > spi_hw_init(&dws->master->dev, dws);
> > return spi_controller_resume(dws->master);
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_resume_host);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_resume_host, SPI_DW_CORE);
> >
> > MODULE_AUTHOR("Feng Tang <feng.tang@...el.com>");
> > MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
> > diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
> > index a09831c62192..5687ec05d627 100644
> > --- a/drivers/spi/spi-dw-dma.c
> > +++ b/drivers/spi/spi-dw-dma.c
> > @@ -10,6 +10,7 @@
> > #include <linux/dmaengine.h>
> > #include <linux/irqreturn.h>
> > #include <linux/jiffies.h>
> > +#include <linux/module.h>
> > #include <linux/pci.h>
> > #include <linux/platform_data/dma-dw.h>
> > #include <linux/spi/spi.h>
> > @@ -17,6 +18,8 @@
> >
> > #include "spi-dw.h"
>
> > +MODULE_IMPORT_NS(SPI_DW_CORE);
>
> I would rather see this at the end of file, but it should work either way.
I've just realized it, do I really need the
namespace imported in this object at all?.. It's linked into the
spi-dw-core.ko. See drivers/spi/Makefile:
obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
spi-dw-y := spi-dw-core.o
spi-dw-$(CONFIG_SPI_DW_DMA) += spi-dw-dma.o
so the object must have got the same namespace.
Yeah, most likely I shouldn't have used the MODULE_IMPORT_NS() here...
-Sergey
>
> > #define RX_BUSY 0
> > #define RX_BURST_LEVEL 16
> > #define TX_BUSY 1
> > @@ -638,7 +641,7 @@ void dw_spi_dma_setup_mfld(struct dw_spi *dws)
> > {
> > dws->dma_ops = &dw_spi_dma_mfld_ops;
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_dma_setup_mfld);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_dma_setup_mfld, SPI_DW_CORE);
> >
> > static const struct dw_spi_dma_ops dw_spi_dma_generic_ops = {
> > .dma_init = dw_spi_dma_init_generic,
> > @@ -653,4 +656,4 @@ void dw_spi_dma_setup_generic(struct dw_spi *dws)
> > {
> > dws->dma_ops = &dw_spi_dma_generic_ops;
> > }
> > -EXPORT_SYMBOL_GPL(dw_spi_dma_setup_generic);
> > +EXPORT_SYMBOL_NS_GPL(dw_spi_dma_setup_generic, SPI_DW_CORE);
> > diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
> > index 17c06039a74d..711f4d3404c5 100644
> > --- a/drivers/spi/spi-dw-mmio.c
> > +++ b/drivers/spi/spi-dw-mmio.c
> > @@ -377,3 +377,4 @@ module_platform_driver(dw_spi_mmio_driver);
> > MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@...asic.com>");
> > MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
> > MODULE_LICENSE("GPL v2");
> > +MODULE_IMPORT_NS(SPI_DW_CORE);
> > diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
> > index 8a91cd58102f..5552240fee55 100644
> > --- a/drivers/spi/spi-dw-pci.c
> > +++ b/drivers/spi/spi-dw-pci.c
> > @@ -213,3 +213,4 @@ module_pci_driver(dw_spi_driver);
> > MODULE_AUTHOR("Feng Tang <feng.tang@...el.com>");
> > MODULE_DESCRIPTION("PCI interface driver for DW SPI Core");
> > MODULE_LICENSE("GPL v2");
> > +MODULE_IMPORT_NS(SPI_DW_CORE);
> > --
> > 2.33.0
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
Powered by blists - more mailing lists