| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211115034334.1713050-1-liambeguin@gmail.com>
Date: Sun, 14 Nov 2021 22:43:20 -0500
From: Liam Beguin <liambeguin@...il.com>
To: liambeguin@...il.com, peda@...ntia.se, jic23@...nel.org,
lars@...afoo.de
Cc: linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, robh+dt@...nel.org
Subject: [PATCH v9 00/14] iio: afe: add temperature rescaling support
Hi Jonathan, Peter,
Apologies for not getting back to you sooner. I got caught up on other
work and wasn't able to dedicate time to this earlier. Hopefully, this
time around, I'll be able to get this to the finish line :-)
I left out IIO_VAL_INT overflows for now, so that I can focus on getting
the rest of these changes pulled in, but I don't mind adding a patch for
that later on.
This series focuses on adding temperature rescaling support to the IIO
Analog Front End (AFE) driver.
The first few patches address minor bugs in IIO inkernel functions, and
prepare the AFE driver for the additional features.
The main changes to the AFE driver include an initial Kunit test suite,
support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs
and temperature transducer sensors.
Thanks for your time,
Liam
Changes since v8:
- reword comment
- fix erroneous 64-bit division
- optimize and use 32-bit divisions when values are know to not overflow
- keep IIO_VAL_FRACTIONAL scale when possible, if not default to fixed
point
- add test cases
- use nano precision in test cases
- simplify offset calculation in rtd_props()
Changes since v7:
- drop gcd() logic in rescale_process_scale()
- use div_s64() instead of do_div() for signed 64-bit divisions
- combine IIO_VAL_FRACTIONAL and IIO_VAL_FRACTIONAL_LOG2 scale cases
- switch to INT_PLUS_NANO when accuracy is lost with FRACTIONAL scales
- rework test logic to allow for small relative error
- rename test variables to align error output messages
Changes since v6:
- rework IIO_VAL_INT_PLUS_{NANO,MICRO} based on Peter's suggestion
- combine IIO_VAL_INT_PLUS_{NANO,MICRO} cases
- add test cases for negative IIO_VAL_INT_PLUS_{NANO,MICRO} corner cases
- force use of positive integers with gcd()
- reduce risk of integer overflow in IIO_VAL_FRACTIONAL_LOG2
- fix duplicate symbol build error
- apply Reviewed-by
Changes since v5:
- add include/linux/iio/afe/rescale.h
- expose functions use to process scale and offset
- add basic iio-rescale kunit test cases
- fix integer overflow case
- improve precision for IIO_VAL_FRACTIONAL_LOG2
Changes since v4:
- only use gcd() when necessary in overflow mitigation
- fix INT_PLUS_{MICRO,NANO} support
- apply Reviewed-by
- fix temperature-transducer bindings
Changes since v3:
- drop unnecessary fallthrough statements
- drop redundant local variables in some calculations
- fix s64 divisions on 32bit platforms by using do_div
- add comment describing iio-rescaler offset calculation
- drop unnecessary MAINTAINERS entry
Changes since v2:
- don't break implicit offset truncations
- make a best effort to get a valid value for fractional types
- drop return value change in iio_convert_raw_to_processed_unlocked()
- don't rely on processed value for offset calculation
- add INT_PLUS_{MICRO,NANO} support in iio-rescale
- revert generic implementation in favor of temperature-sense-rtd and
temperature-transducer
- add separate section to MAINTAINERS file
Changes since v1:
- rebase on latest iio `testing` branch
- also apply consumer scale on integer channel scale types
- don't break implicit truncation in processed channel offset
calculation
- drop temperature AFE flavors in favor of a simpler generic
implementation
Liam Beguin (14):
iio: inkern: apply consumer scale on IIO_VAL_INT cases
iio: inkern: apply consumer scale when no channel scale is available
iio: inkern: make a best effort on offset calculation
iio: afe: rescale: expose scale processing function
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: add offset support
iio: afe: rescale: use s64 for temporary scale calculations
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: add RTD temperature sensor support
iio: afe: rescale: add temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
dt-bindings: iio: afe: add bindings for temperature transducers
.../iio/afe/temperature-sense-rtd.yaml | 101 +++
.../iio/afe/temperature-transducer.yaml | 114 +++
drivers/iio/afe/iio-rescale.c | 271 ++++++-
drivers/iio/inkern.c | 40 +-
drivers/iio/test/Kconfig | 10 +
drivers/iio/test/Makefile | 1 +
drivers/iio/test/iio-test-rescale.c | 705 ++++++++++++++++++
include/linux/iio/afe/rescale.h | 34 +
8 files changed, 1232 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
create mode 100644 drivers/iio/test/iio-test-rescale.c
create mode 100644 include/linux/iio/afe/rescale.h
Range-diff against v8:
1: 42a7a1047edc = 1: ae3cc93baee6 iio: inkern: apply consumer scale on IIO_VAL_INT cases
2: a1cd89fdad11 = 2: 06f66e7f7403 iio: inkern: apply consumer scale when no channel scale is available
3: ed0721fb6bd1 = 3: 2dbf6b3bbaeb iio: inkern: make a best effort on offset calculation
4: f8fb78bb1112 = 4: b083cf307268 iio: afe: rescale: expose scale processing function
5: 504b7a3f830b ! 5: a0bde29ecc8c iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+ else
+ mult = 1000000LL;
+ /*
-+ * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if *val OR
-+ * *val2 is negative the schan scale is negative
++ * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val
++ * OR *val2 is negative the schan scale is negative, i.e.
++ * *val = 1 and *val2 = -0.5 yields -1.5 not -0.5.
+ */
+ neg = *val < 0 || *val2 < 0;
+
6: c254e9ae813e = 6: c3d0e6248033 iio: afe: rescale: add offset support
7: ee8814d6abe4 = 7: 2a81fa735103 iio: afe: rescale: use s64 for temporary scale calculations
8: 62cdcfbc9836 = 8: 8315548d0fce iio: afe: rescale: reduce risk of integer overflow
9: 88309a5136ee ! 9: 223ed0569cd2 iio: afe: rescale: fix accuracy for small fractional scales
@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+
+ tmp = div_s64_rem(tmp, 1000000000LL, &rem);
*val = tmp;
+- return scale_type;
++
++ if (!rem)
++ return scale_type;
+
-+ /*
-+ * For small values, the approximation can be costly,
-+ * change scale type to maintain accuracy.
-+ *
-+ * 100 vs. 10000000 NANO caps the error to about 100 ppm.
-+ */
+ if (scale_type == IIO_VAL_FRACTIONAL)
+ tmp = *val2;
+ else
+ tmp = 1 << *val2;
+
-+ if (abs(rem) > 10000000 && abs(*val / tmp) < 100) {
-+ *val = div_s64_rem(*val, tmp, &rem2);
-+
-+ *val2 = div_s64(rem, tmp);
-+ if (rem2)
-+ *val2 += div_s64(rem2 * 1000000000LL, tmp);
++ rem2 = *val % (int)tmp;
++ *val = *val / (int)tmp;
+
-+ return IIO_VAL_INT_PLUS_NANO;
-+ }
++ *val2 = rem / (int)tmp;
++ if (rem2)
++ *val2 += div_s64((s64)rem2 * 1000000000LL, tmp);
+
- return scale_type;
++ return IIO_VAL_INT_PLUS_NANO;
case IIO_VAL_INT_PLUS_NANO:
case IIO_VAL_INT_PLUS_MICRO:
+ if (scale_type == IIO_VAL_INT_PLUS_NANO)
10: fb505a9f42f1 ! 10: 90044efdf8be iio: test: add basic tests for the iio-rescale driver
@@ drivers/iio/test/Makefile
# Keep in alphabetical order
+obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o
+ CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN)
## drivers/iio/test/iio-test-rescale.c (new) ##
@@
@@ drivers/iio/test/iio-test-rescale.c (new)
+ * Use cases with small scales involving divisions
+ */
+ {
++ .name = "small IIO_VAL_FRACTIONAL, 261/509 scaled by 90/1373754273",
++ .numerator = 261,
++ .denominator = 509,
++ .schan_scale_type = IIO_VAL_FRACTIONAL,
++ .schan_val = 90,
++ .schan_val2 = 1373754273,
++ .expected = "0.000000033594",
++ },
++ {
++ .name = "small IIO_VAL_FRACTIONAL, 90/1373754273 scaled by 261/509",
++ .numerator = 90,
++ .denominator = 1373754273,
++ .schan_scale_type = IIO_VAL_FRACTIONAL,
++ .schan_val = 261,
++ .schan_val2 = 509,
++ .expected = "0.000000033594",
++ },
++ {
++ .name = "small IIO_VAL_FRACTIONAL, 760/1373754273 scaled by 427/2727",
++ .numerator = 760,
++ .denominator = 1373754273,
++ .schan_scale_type = IIO_VAL_FRACTIONAL,
++ .schan_val = 427,
++ .schan_val2 = 2727,
++ .expected = "0.000000086626",
++ },
++ {
++ .name = "small IIO_VAL_FRACTIONAL, 761/1373754273 scaled by 427/2727",
++ .numerator = 761,
++ .denominator = 1373754273,
++ .schan_scale_type = IIO_VAL_FRACTIONAL,
++ .schan_val = 427,
++ .schan_val2 = 2727,
++ .expected = "0.000000086740",
++ },
++ {
++ .name = "small IIO_VAL_FRACTIONAL, 5/32768 scaled by 3/10000",
++ .numerator = 5,
++ .denominator = 32768,
++ .schan_scale_type = IIO_VAL_FRACTIONAL,
++ .schan_val = 3,
++ .schan_val2 = 10000,
++ .expected = "0.0000000457763671875",
++ },
++ {
+ .name = "small IIO_VAL_FRACTIONAL, 0 < scale < 1",
+ .numerator = 6,
+ .denominator = 6,
@@ drivers/iio/test/iio-test-rescale.c (new)
+ .expected = "-1.3333333333333333",
+ },
+ {
++ .name = "small IIO_VAL_FRACTIONAL_LOG2, 760/32768 scaled by 15/22",
++ .numerator = 760,
++ .denominator = 32768,
++ .schan_scale_type = IIO_VAL_FRACTIONAL_LOG2,
++ .schan_val = 15,
++ .schan_val2 = 22,
++ .expected = "0.000000082946",
++ },
++ {
++ .name = "small IIO_VAL_FRACTIONAL_LOG2, 761/32768 scaled by 15/22",
++ .numerator = 761,
++ .denominator = 32768,
++ .schan_scale_type = IIO_VAL_FRACTIONAL_LOG2,
++ .schan_val = 15,
++ .schan_val2 = 22,
++ .expected = "0.000000083055",
++ },
++ {
+ .name = "small IIO_VAL_FRACTIONAL_LOG2, 0 < scale < 1",
+ .numerator = 16,
+ .denominator = 3,
@@ drivers/iio/test/iio-test-rescale.c (new)
+KUNIT_ARRAY_PARAM(iio_rescale_offset, offset_cases, case_to_desc);
+
+/**
-+ * iio_str_to_micro() - Parse a fixed-point string to get an
-+ * IIO_VAL_INT_PLUS_MICRO value
++ * iio_str_to_nano() - Parse a fixed-point string to get an
++ * IIO_VAL_INT_PLUS_NANO value
+ * @str: The string to parse
-+ * @micro: The number as an integer
++ * @nano: The number as an integer
+ *
+ * Returns 0 on success, or a negative error code if the string cound not be
+ * parsed.
+ */
-+static int iio_str_to_micro(const char *str, s64 *micro)
++static int iio_str_to_nano(const char *str, s64 *nano)
+{
-+ int fract_mult = 100000LL;
++ int fract_mult = 100000000LL;
+ int tmp, tmp2;
+ int ret = 0;
+
@@ drivers/iio/test/iio-test-rescale.c (new)
+ if (tmp < 0)
+ tmp2 *= -1;
+
-+ *micro = (s64)tmp * 10 * fract_mult + tmp2;
++ *nano = (s64)tmp * 10 * fract_mult + tmp2;
+
+ return ret;
+}
+
+/**
-+ * iio_test_relative_error_ppm() - Compute relative error (in ppm) between two
-+ * fixed-point strings
++ * iio_test_relative_error_ppm() - Compute relative error (in parts-per-million)
++ * between two fixed-point strings
+ * @real_str: The real value as a string
+ * @exp_str: The expected value as a string
+ *
+ * Returns a negative error code if the strings cound not be parsed, or the
-+ * relative error in ppm.
++ * relative error in parts-per-million.
+ */
+static int iio_test_relative_error_ppm(const char *real_str, const char *exp_str)
+{
+ s64 real, exp, err;
+ int ret;
+
-+ ret = iio_str_to_micro(real_str, &real);
++ ret = iio_str_to_nano(real_str, &real);
+ if (ret < 0)
+ return ret;
+
-+ ret = iio_str_to_micro(exp_str, &exp);
++ ret = iio_str_to_nano(exp_str, &exp);
+ if (ret < 0)
+ return ret;
+
++ if (!exp) {
++ pr_err("Expected value is null, relative error is undefined\n");
++ return -EINVAL;
++ }
++
+ err = 1000000 * abs(exp - real);
+ err = div64_u64(err, abs(exp));
+ return (int)err;
@@ drivers/iio/test/iio-test-rescale.c (new)
+ rel_ppm = iio_test_relative_error_ppm(buff, t->expected);
+ KUNIT_EXPECT_GE_MSG(test, rel_ppm, 0, "failed to compute ppm\n");
+
-+ KUNIT_EXPECT_LT_MSG(test, rel_ppm, 500,
++ KUNIT_EXPECT_EQ_MSG(test, rel_ppm, 0,
+ "\t real=%s"
+ "\texpected=%s\n",
+ buff, t->expected);
11: 050487186e14 = 11: c4ed463e5fb0 iio: afe: rescale: add RTD temperature sensor support
12: f36a44a5d898 ! 12: ff2f0dc248a7 iio: afe: rescale: add temperature transducers
@@ drivers/iio/afe/iio-rescale.c: static int rescale_temp_sense_rtd_props(struct de
+ s32 offset = 0;
+ s32 sense = 1;
+ s32 alpha;
-+ s64 tmp;
+ int ret;
+
+ device_property_read_u32(dev, "sense-offset-millicelsius", &offset);
@@ drivers/iio/afe/iio-rescale.c: static int rescale_temp_sense_rtd_props(struct de
+ rescale->numerator = 1000000;
+ rescale->denominator = alpha * sense;
+
-+ tmp = (s64)offset * (s64)alpha * (s64)sense;
-+ rescale->offset = div_s64(tmp, (s32)1000000);
++ rescale->offset = div_s64((s64)offset * rescale->denominator,
++ rescale->numerator);
+
+ return 0;
+}
13: 63be647fd110 = 13: 84bc1f7d1ab5 dt-bindings: iio: afe: add bindings for temperature-sense-rtd
14: c2f5c19dece3 = 14: 1b76cfb37e23 dt-bindings: iio: afe: add bindings for temperature transducers
base-commit: 2b6bff0b122785f09cfbdc34b1aa9edceea6e4c1
--
2.32.0.452.g940fe202adcb
Powered by blists - more mailing lists