[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211116062256.2417186-6-vkoul@kernel.org>
Date: Tue, 16 Nov 2021 11:52:48 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Rob Clark <robdclark@...il.com>
Cc: linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Vinod Koul <vkoul@...nel.org>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Jonathan Marek <jonathan@...ek.ca>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Abhinav Kumar <abhinavk@...eaurora.org>,
Jeffrey Hugo <jeffrey.l.hugo@...il.com>,
Sumit Semwal <sumit.semwal@...aro.org>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org
Subject: [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d
We cannot enable mode_3d when we are using the DSC. So pass
configuration to detect DSC is enabled and not enable mode_3d
when we are using DSC
We add a helper dpu_encoder_helper_get_dsc() to detect dsc
enabled and pass this to .setup_intf_cfg()
Signed-off-by: Vinod Koul <vkoul@...nel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 11 +++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 2 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 3 ++-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 2 ++
4 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index e7270eb6b84b..efb85d595598 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
return BLEND_3D_NONE;
}
+static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)
+{
+ struct drm_encoder *drm_enc = phys_enc->parent;
+ struct msm_drm_private *priv = drm_enc->dev->dev_private;
+
+ if (priv->dsc)
+ return priv->dsc->dsc_mask;
+
+ return 0;
+}
+
/**
* dpu_encoder_helper_split_config - split display configuration helper function
* This helper function may be used by physical encoders to configure
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 34a6940d12c5..f3f00f4d0193 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
intf_cfg.stream_sel = cmd_enc->stream_sel;
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+ intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
+
ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 64740ddb983e..36831457a91b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
intf_cfg |= (cfg->intf & 0xF) << 4;
- if (cfg->mode_3d) {
+ /* In DSC we can't set merge, so check for dsc too */
+ if (cfg->mode_3d && !cfg->dsc) {
intf_cfg |= BIT(19);
intf_cfg |= (cfg->mode_3d - 0x1) << 20;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 806c171e5df2..9847c9c46d6f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
* @merge_3d: 3d merge block used
* @intf_mode_sel: Interface mode, cmd / vid
* @stream_sel: Stream selection for multi-stream interfaces
+ * @dsc: DSC BIT masks
*/
struct dpu_hw_intf_cfg {
enum dpu_intf intf;
@@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
enum dpu_merge_3d merge_3d;
enum dpu_ctl_mode_sel intf_mode_sel;
int stream_sel;
+ unsigned int dsc;
};
/**
--
2.31.1
Powered by blists - more mailing lists