linux-kernel - [PATCH v1 3/3] phy: qcom: Program SSC only if supported by sink

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 16 Nov 2021 12:37:38 +0530
From:   Sankeerth Billakanti <quic_sbillaka@...cinc.com>
To:     <dri-devel@...ts.freedesktop.org>, <linux-arm-msm@...r.kernel.org>,
        <freedreno@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>
CC:     Sankeerth Billakanti <quic_sbillaka@...cinc.com>,
        <robdclark@...il.com>, <seanpaul@...omium.org>,
        <swboyd@...omium.org>, <quic_kalyant@...cinc.com>,
        <quic_abhinavk@...cinc.com>, <dianders@...omium.org>,
        <quic_khsieh@...cinc.com>, <quic_mkrishn@...cinc.com>
Subject: [PATCH v1 3/3] phy: qcom: Program SSC only if supported by sink

Some legacy eDP sinks may not support SSC. The support for SSC is
indicated through an opts flag from the controller driver. This
change will enable SSC only if the sink supports it.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@...cinc.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 6d9404d..06ba609 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -335,9 +335,11 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
 	writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
 
-	ret = qcom_edp_configure_ssc(edp);
-	if (ret)
-		return ret;
+	if (edp->dp_opts.ssc) {
+		ret = qcom_edp_configure_ssc(edp);
+		if (ret)
+			return ret;
+	}
 
 	ret = qcom_edp_configure_pll(edp);
 	if (ret)
-- 
2.7.4