Date:   Tue, 16 Nov 2021 14:43:16 +0000
From:   "Miclaus, Antoniu" <Antoniu.Miclaus@...log.com>
To:     Jonathan Cameron <jic23@...nel.org>
CC:     "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 4/4] iio:filter:admv8818: Add sysfs ABI documentation

Hello Jonathan,

--
Antoniu Miclăuş

> -----Original Message-----
> From: Jonathan Cameron <jic23@...nel.org>
> Sent: Friday, November 12, 2021 7:56 PM
> To: Miclaus, Antoniu <Antoniu.Miclaus@...log.com>
> Cc: robh+dt@...nel.org; linux-iio@...r.kernel.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH 4/4] iio:filter:admv8818: Add sysfs ABI documentation
> 
> [External]
> 
> On Tue, 9 Nov 2021 14:31:27 +0200
> Antoniu Miclaus <antoniu.miclaus@...log.com> wrote:
> 
> > Add initial ABI documentation for admv8818 filter sysfs interfaces.
> >
> > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
> > ---
> >  .../ABI/testing/sysfs-bus-iio-filter-admv8818 | 60 +++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-filter-
> admv8818
> >
> > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
> b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
> > new file mode 100644
> > index 000000000000..7fa5b0819055
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
> > @@ -0,0 +1,60 @@
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_filter_high_pass_3
> db_frequency
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		The cut-off frequency of the ADMV8818 high pass filter. The
> value is scaled using
> > +		the `out_altvoltageY_scale` attribute so that GHz frequencies
> are valid inputs,
> > +		The accepted range of values for the frequencies is between
> 1.75GHz and 19.9GHz.
> > +
> > +		The default value for the scale is 1000000, therefore MHz
> frequency values are
> > +		passed as input.
> 
> I don't think this ABI really works unfortunately.  What we are talking here is
> a bunch of
> selectable filters and one high pass + one low pass filter max can be enabled
> at a time.
> 
> So two options, we either have simply a single
> out_altvoltage_filter_low_pass_3db_frequency
> out_altvoltage_filter_high_pass_3db_frequency
> Probably both with index 0 and index free channels are a silly idea given it's
> fine to just have
> one with index 0.
> 
> or if there is sufficient reason to setup a selectable set of options then
> we could look at indexed filters and a _symbol type selection which may
> seem
> odd but generalises fairly well from Phase Shift Keying type symbol stuff we
> have had before (though still in staging because no one has cleaned the
> drivers
> up yet).
> 
> 
> > +
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_filter_low_pass_3
> db_frequency
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		The cut-off frequency of the ADMV8818 low pass filter. The
> value is scaled using
> > +		the `out_altvoltageY_scale` attribute so that GHz frequencies
> are valid inputs,
> > +		The accepted range of values for the frequencies is between
> 2.05GHz and 18.85GHz.
> > +
> > +		The default value for the scale is 1000000, therefore MHz
> frequency values are
> > +		passed as input.
> > +
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		Scale high pass and lowpass filter frequency values to Hz.
> > +
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_mode_available
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		Reading this returns the valid values that can be written to
> the
> > +		on_altvoltage0_mode attribute:
> > +
> > +		- auto -> enable/register the clock rate notifier
> 
> Hmm I'm wondering about the usecases of this.
> 
> If this is being used with a clk device, then I think only the notifier option
> makes much
> sense.  If it's not a clk that linux is aware of then manual makes more sense.
> 
> > +		- manual -> disable/unregister the clock rate notifier
> > +		- bypass -> bypass LPF/HPF and disable/unregister the clock
> rate notifier
> 
> This should be separate enable for the two filters though I think we've use
> the value 0
> to mean this in the past.  The bypasses look to be per filter anyway, so a
> single
> mode is insufficiently flexible.
> 
> In the vast majority of cases, mode attributes are not used because they are
> always device
> specific and hence generic code has no idea what to do with them.
> 

As I mentioned also in the dt-bindings comments, these attributes were added  
because they were requested by the users of the application in which this part
was involved.

If you think these attributes/properties are way too custom, I can drop them.

Same goes for the bandwidth attribute.

> > +
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_mode
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		This attribute configures the filter mode.
> > +		Reading returns the actual mode.
> > +
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_filter_band_pass_
> bandwidth_3db_frequency
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		Store the band pass bandwidth frequency value applied.
> > +		Reading returns the bandwidth frequency scaled.
> 
> The device has no concept of bandpass that I can find so why are we
> introducing it?
> Let the user set the two filters to achieve this result.  Userspace can do the
> maths for us :)
> 
> > +
> > +
> > +What:
> 	/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_filter_band_pass_
> center_frequency
> > +KernelVersion:
> > +Contact:	linux-iio@...r.kernel.org
> > +Description:
> > +		Store the band pass center frequency value applied.
> > +		Reading returns the center frequency scaled.

Powered by blists - more mailing lists