| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211116200739.924401-1-mka@chromium.org>
Date: Tue, 16 Nov 2021 12:07:32 -0800
From: Matthias Kaehlcke <mka@...omium.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Stern <stern@...land.harvard.edu>,
Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
Mathias Nyman <mathias.nyman@...el.com>,
Felipe Balbi <balbi@...nel.org>
Cc: linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzk@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Peter Chen <peter.chen@...nel.org>, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org,
Douglas Anderson <dianders@...omium.org>,
Roger Quadros <rogerq@...nel.org>,
Michal Simek <michal.simek@...inx.com>,
Ravi Chandra Sadineni <ravisadineni@...omium.org>,
Bastien Nocera <hadess@...ess.net>,
Matthias Kaehlcke <mka@...omium.org>,
Al Viro <viro@...iv.linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew@...n.ch>,
Andrey Konovalov <andreyknvl@...il.com>,
Andrey Zhizhikin <andrey.zhizhikin@...ca-geosystems.com>,
Andy Gross <agross@...nel.org>, Arnd Bergmann <arnd@...db.de>,
Aswath Govindraju <a-govindraju@...com>,
Biju Das <biju.das.jz@...renesas.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Dmitry Osipenko <digetx@...il.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Florian Fainelli <f.fainelli@...il.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Gregory Clement <gregory.clement@...tlin.com>,
Grygorii Strashko <grygorii.strashko@...com>,
Guido Günther <agx@...xcpu.org>,
Jagan Teki <jagan@...rulasolutions.com>,
Joel Stanley <joel@....id.au>,
Kishon Vijay Abraham I <kishon@...com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Li Jun <jun.li@....com>,
Linus Walleij <linus.walleij@...aro.org>,
Lukas Bulwahn <lukas.bulwahn@...il.com>,
Manivannan Sadhasivam <mani@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Mark Brown <broonie@...nel.org>, Nishanth Menon <nm@...com>,
Olivier Moysan <olivier.moysan@...com>,
Pawel Laszczak <pawell@...ence.com>,
Peter Chen <peter.chen@....com>,
Robert Richter <rric@...nel.org>,
Russell King <linux@...linux.org.uk>,
Sasha Levin <sashal@...nel.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Thierry Reding <treding@...dia.com>,
Thomas Gleixner <tglx@...utronix.de>,
Tony Lindgren <tony@...mide.com>,
Viresh Kumar <viresh.kumar@...aro.org>,
Will Deacon <will@...nel.org>,
William Cohen <wcohen@...hat.com>,
Zenghui Yu <yuzenghui@...wei.com>,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-omap@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH v17 0/7] usb: misc: Add onboard_usb_hub driver
This series adds:
- the onboard_usb_hub_driver
- glue in the generic HCD code to create and destroy the
onboard_usb_hub platform devices if needed
- device tree changes that add RTS5411 entries for the QCA SC7180
based boards trogdor and lazor
- a couple of stubs for platform device functions to avoid
unresolved symbols with certain kernel configs
The main issue the driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Changes in v17:
- rebased on top of v5.16-rc1
- moved creation of onboard_hub platform devices from xhci_platform
to the generic HCD code
- addressed review comments for the onboard_hub driver
- moved Kconfig/defconfig changes to the end of the series. The
onboard_hub driver doesn't depend on XHCI_PLATFORM anymore,
hence these changes aren't really required for the driver, but
they still seem to be a worthwhile improvement
Changes in v16:
- added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM
where needed' to keep arm32 defconfigs effectively unchanged
Changes in v15:
- adjusted dependencies of USB_DWC3_CORE to make sure it can only
be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
or USB_DWC3_DUAL_ROLE is selectable
Changes in v14:
- rebased on top of v5.14-rc1
- dropped DT binding patch which landed in v5.13
Changes in v13:
- added patch "usb: Specify dependency on USB_XHCI_PLATFORM with
'depends on'" to the series to avoid Kconfig conflicts
- added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM"
to the series to keep effective defconfig unchanged
Changes in v12:
- onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE)
in onboard_hub.h to also check for the driver built as module
- onboard_hub_driver: include onboard_hub.h again to make sure there
are prototype declarations for the public functions
Changes in v11:
- support multiple onboard hubs connected to the same parent
- don't include ‘onboard_hub.h’ from the onboard hub driver
Changes in v10:
- always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m
- keep 'regulator-boot-on' property for pp3300_hub
Changes in v9:
- added dependency on ONBOARD_USB_HUB (or !!ONBOARD_USB_HUB) to
USB_PLATFORM_XHCI
Changes in v7:
- updated DT binding
- series rebased on qcom/arm64-for-5.13
Changes in v6:
- updated summary
Changes in v5:
- cover letter added
Matthias Kaehlcke (7):
usb: misc: Add onboard_usb_hub driver
of/platform: Add stubs for of_platform_device_create/destroy()
usb: core: hcd: Create platform devices for onboard hubs in probe()
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed
arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM
usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
.../sysfs-bus-platform-onboard-usb-hub | 8 +
MAINTAINERS | 7 +
arch/arm/configs/exynos_defconfig | 1 +
arch/arm/configs/keystone_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/configs/mvebu_v7_defconfig | 1 +
arch/arm/configs/omap2plus_defconfig | 1 +
arch/arm/configs/pxa_defconfig | 1 +
.../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 19 +-
.../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 12 +-
.../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 +-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 19 +-
arch/arm64/configs/defconfig | 1 +
drivers/usb/cdns3/Kconfig | 2 +-
drivers/usb/core/hcd.c | 6 +
drivers/usb/dwc3/Kconfig | 5 +-
drivers/usb/host/Kconfig | 4 +-
drivers/usb/misc/Kconfig | 17 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/onboard_usb_hub.c | 491 ++++++++++++++++++
include/linux/of_platform.h | 22 +-
include/linux/usb/hcd.h | 1 +
include/linux/usb/onboard_hub.h | 18 +
23 files changed, 619 insertions(+), 39 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
create mode 100644 drivers/usb/misc/onboard_usb_hub.c
create mode 100644 include/linux/usb/onboard_hub.h
--
2.34.0.rc1.387.gb447b232ab-goog
Powered by blists - more mailing lists