linux-kernel - [PATCH 5.15 258/917] net: phy: micrel: make *-skew-ps check more lenient

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 15 Nov 2021 17:55:53 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Matthias Schiffer <matthias.schiffer@...tq-group.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.15 258/917] net: phy: micrel: make *-skew-ps check more lenient

From: Matthias Schiffer <matthias.schiffer@...tq-group.com>

[ Upstream commit 67ca5159dbe2edb5dae7544447b8677d2596933a ]

It seems reasonable to fine-tune only some of the skew values when using
one of the rgmii-*id PHY modes, and even when all skew values are
specified, using the correct ID PHY mode makes sense for documentation
purposes. Such a configuration also appears in the binding docs in
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver
should not warn about it.

Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
Link: https://lore.kernel.org/r/20211012103402.21438-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/phy/micrel.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5c928f827173c..643b1c1827a92 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -863,9 +863,9 @@ static int ksz9031_config_init(struct phy_device *phydev)
 				MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
 				tx_data_skews, 4, &update);
 
-		if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII)
+		if (update && !phy_interface_is_rgmii(phydev))
 			phydev_warn(phydev,
-				    "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n");
+				    "*-skew-ps values should be used only with RGMII PHY modes\n");
 
 		/* Silicon Errata Sheet (DS80000691D or DS80000692D):
 		 * When the device links in the 1000BASE-T slave mode only,
-- 
2.33.0