Message-ID: <20211117214852.GU449541@dread.disaster.area>
Date:   Thu, 18 Nov 2021 08:48:52 +1100
From:   Dave Chinner <david@...morbit.com>
To:     Brian Foster <bfoster@...hat.com>
Cc:     Ian Kent <raven@...maw.net>, Miklos Szeredi <miklos@...redi.hu>,
        xfs <linux-xfs@...r.kernel.org>,
        "Darrick J. Wong" <djwong@...nel.org>,
        Al Viro <viro@...iv.linux.org.uk>,
        David Howells <dhowells@...hat.com>,
        linux-fsdevel <linux-fsdevel@...r.kernel.org>,
        Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] xfs: make sure link path does not go away at access

On Wed, Nov 17, 2021 at 01:56:17PM -0500, Brian Foster wrote:
> On Wed, Nov 17, 2021 at 11:22:51AM +1100, Dave Chinner wrote:
> > On Tue, Nov 16, 2021 at 10:59:05AM -0500, Brian Foster wrote:
> > > On Tue, Nov 16, 2021 at 02:01:20PM +1100, Dave Chinner wrote:
> > > > On Tue, Nov 16, 2021 at 09:03:31AM +0800, Ian Kent wrote:
> > > > > On Tue, 2021-11-16 at 09:24 +1100, Dave Chinner wrote:
> > > > > > If it isn't safe for ext4 to do that, then we have a general
> > > > > > pathwalk problem, not an XFS issue. But, as you say, it is safe
> > > > > > to do this zeroing, so the fix to xfs_ifree() is to zero the
> > > > > > link buffer instead of freeing it, just like ext4 does.
> > > > > > 
> > > > > > As a side issue, we really don't want to move what XFS does in
> > > > > > .destroy_inode to .free_inode because that then means we need to
> > > > > > add synchronise_rcu() calls everywhere in XFS that might need to
> > > > > > wait on inodes being inactivated and/or reclaimed. And because
> > > > > > inode reclaim uses lockless rcu lookups, there's substantial
> > > > > > danger of adding rcu callback related deadlocks to XFS here.
> > > > > > That's just not a direction we should be moving in.
> > > > > 
> > > > > Another reason I decided to use the ECHILD return instead is that
> > > > > I thought synchronise_rcu() might add an unexpected delay.
> > > > 
> > > > It depends where you put the synchronise_rcu() call. :)
> > > > 
> > > > > Since synchronise_rcu() will only wait for processes that
> > > > > currently have the rcu read lock do you think that could actually
> > > > > be a problem in this code path?
> > > > 
> > > > No, I don't think it will.  The inode recycle case in XFS inode
> > > > lookup can trigger in two cases:
> > > > 
> > > > 1. VFS cache eviction followed by immediate lookup
> > > > 2. Inode has been unlinked and evicted, then free and reallocated by
> > > > the filesytsem.
> > > > 
> > > > In case #1, that's a cold cache lookup and hence delays are
> > > > acceptible (e.g. a slightly longer delay might result in having to
> > > > fetch the inode from disk again). Calling synchronise_rcu() in this
> > > > case is not going to be any different from having to fetch the inode
> > > > from disk...
> > > > 
> > > > In case #2, there's a *lot* of CPU work being done to modify
> > > > metadata (inode btree updates, etc), and so the operations can block
> > > > on journal space, metadata IO, etc. Delays are acceptible, and could
> > > > be in the order of hundreds of milliseconds if the transaction
> > > > subsystem is bottlenecked. waiting for an RCU grace period when we
> > > > reallocate an indoe immediately after freeing it isn't a big deal.
> > > > 
> > > > IOWs, if synchronize_rcu() turns out to be a problem, we can
> > > > optimise that separately - we need to correct the inode reuse
> > > > behaviour w.r.t. VFS RCU expectations, then we can optimise the
> > > > result if there are perf problems stemming from correct behaviour.
> > > > 
> > > 
> > > FWIW, with a fairly crude test on a high cpu count system, it's not that
> > > difficult to reproduce an observable degradation in inode allocation
> > > rate with a synchronous grace period in the inode reuse path, caused
> > > purely by a lookup heavy workload on a completely separate filesystem.
> > >
> > > The following is a 5m snapshot of the iget stats from a filesystem doing
> > > allocs/frees with an external/heavy lookup workload (which not included
> > > in the stats), with and without a sync grace period wait in the reuse
> > > path:
> > > 
> > > baseline:	ig 1337026 1331541 4 5485 0 5541 1337026
> > > sync_rcu_test:	ig 2955 2588 0 367 0 383 2955
> > 
> > The alloc/free part of the workload is a single threaded
> > create/unlink in a tight loop, yes?
> > 
> > This smells like a side effect of agressive reallocation of
> > just-freed XFS_IRECLAIMABLE inodes from the finobt that haven't had
> > their unlink state written back to disk yet. i.e. this is a corner
> > case in #2 above where a small set of inodes is being repeated
> > allocated and freed by userspace and hence being agressively reused
> > and never needing to wait for IO. i.e. a tempfile workload
> > optimisation...
> > 
> 
> Yes, that was the point of the test.. to stress inode reuse against
> known rcu activity.
> 
> > > I think this is kind of the nature of RCU and why I'm not sure it's a
> > > great idea to rely on update side synchronization in a codepath that
> > > might want to scale/perform in certain workloads.
> > 
> > The problem here is not update side synchronisation. Root cause is
> > aggressive reallocation of recently freed VFS inodes via physical
> > inode allocation algorithms. Unfortunately, the RCU grace period
> > requirements of the VFS inode life cycle dictate that we can't
> > aggressively re-allocate and reuse freed inodes like this. i.e.
> > reallocation of a just-freed inode also has to wait for an RCU grace
> > period to pass before the in memory inode can be re-instantiated as
> > a newly allocated inode.
> > 
> 
> I'm just showing that insertion of an synchronous rcu grace period wait
> in the iget codepath is not without side effect, because that was the
> proposal.
> 
> > (Hmmmm - I wonder if of the other filesystems might have similar
> > problems with physical inode reallocation inside a RCU grace period?
> > i.e. without inode instance re-use, the VFS could potentially see
> > multiple in-memory instances of the same physical inode at the same
> > time.)
> > 
> > > I'm not totally sure
> > > if this will be a problem for real users running real workloads or not,
> > > or if this can be easily mitigated, whether it's all rcu or a cascading
> > > effect, etc. This is just a quick test so that all probably requires
> > > more test and analysis to discern.
> > 
> > This looks like a similar problem to what busy extents address - we
> > can't reuse a newly freed extent until the transaction containing
> > the EFI/EFD hit stable storage (and the discard operation on the
> > range is complete). Hence while a newly freed extent is
> > marked free in the allocbt, they can't be reused until they are
> > released from the busy extent tree.
> > 
> > I can think of several ways to address this, but let me think on it
> > a bit more.  I suspect there's a trick we can use to avoid needing
> > synchronise_rcu() completely by using the spare radix tree tag and
> > rcu grace period state checks with get_state_synchronize_rcu() and
> > poll_state_synchronize_rcu() to clear the radix tree tags via a
> > periodic radix tree tag walk (i.e. allocation side polling for "can
> > we use this inode" rather than waiting for the grace period to
> > expire once an inode has been selected and allocated.)
> > 
> 
> Yeah, and same. It's just a matter of how to break things down. I can
> sort of see where you're going with the above, though I'm not totally
> convinced that rcu gp polling is an advantage over explicit use of
> existing infrastructure/apis.

RCU gp polling is existing infrastructure/apis. It's used in several
places to explicitly elide unnecessary calls to
synchronise_rcu()....

> It seems more important that we avoid
> overly crude things like sync waits in the alloc path vs. optimize away
> potentially multiple async grace periods in the free path. Of course,
> it's worth thinking about options regardless.
> 
> That said, is deferred inactivation still a thing? If so, then we've

Already merged.

> already decided to defer/batch inactivations from the point the vfs
> calls our ->destroy_inode() based on our own hueristic (which is likely
> longer than a grace period already in most cases, making this even less
> of an issue).

No, Performance problems with large/long queues dictated a solution
in the other direction, into lockless, minimal depth, low delay
per-cpu deferred batching. IOWs, batch scheduling has significatly
faster scheduling requirements than RCU grace periods provide.

> That includes deferral of the physical free and inobt
> updates, which means inode reuse can't occur until the inactivation
> workqueue task runs.

Which can happen the moment the inode is queued for inactivation
on CONFIG_PREEMPT configs, long before a RCU grace period has
expired.

> Only a single grace period is required to cover
> (from the rcuwalk perspective) the entire set of inodes queued for
> inactivation. That leaves at least a few fairly straightforward options:
> 
> 1. Use queue_rcu_work() to schedule the inactivation task. We'd probably
> have to isolate the list to process first from the queueing context
> rather than from workqueue context to ensure we don't process recently
> added inodes that haven't sat for a grace period.

No, that takes too long. Long queues simply mean deferred
inactivation is working on cold CPU caches and that means we take a
30-50% performance hit on inode eviction overhead for inodes that
need inactivation (e.g. unlinked inodes) just by having to load all
the inode state into CPU caches again.

Numbers I recorded at the time indicate that inactivation that
doesn't block on IO or the log typically takes between 200-500us
of CPU time, so the deferred batch sizes are sized to run about
10-15ms worth of deferred processing at a time. Filling a batch
takes memory reclaim about 200uS to fill when running
dispose_list() to evict inodes.

The problem with using RCU grace periods is that they delay the
start of the work for at least 10ms, sometimes hundreds of ms.
Using queue_rcu_work() means we will need to go back to unbound
depth queues to avoid blocking waiting for grace period expiry to
maintain perfomrance. THis means having tens of thousands of inodes
queued for inactivation before the workqueue starts running. These
are the sorts of numbers that caused all the problems Darrick was
having with performance, and that was all cold cache loading
overhead which is unavoidable with such large queue depths....

> 2. Drop a synchronize_rcu() in the workqueue task before it starts
> processing items.

Same problem. The per-cpu queue currently has a hard throttle at 256
inodes and that means nothing will be able to queue inodes for
inactivation on that CPU until the current RCU grace period expires.

> 3. Incorporate something like the above with an rcu grace period cookie
> to selectively process inodes (or batches thereof).

The use of lockless linked lists in the per-cpu queues makes that
difficult. Lockless dequeue requires removing the entire list from
the shared list head atomically, and it's a single linked list so we
can't selectively remove inodes from the list without a full
traversal. And selective removal from the list can't be done
locklessly.

We could, potentially, use a separate lockless queue for unlinked
inodes and defer that to after a grace period, but then rm -rf
workloads will go much, much slower.

Cheers,

Dave.
-- 
Dave Chinner
david@...morbit.com

Powered by blists - more mailing lists