| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <a152c9fdfa9362068fee1e2c70c7087fd30d6c53.1637140900.git.mchehab+huawei@kernel.org>
Date: Wed, 17 Nov 2021 09:25:29 +0000
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: linuxarm@...wei.com, mauro.chehab@...wei.com,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
Alex Dewar <alex.dewar90@...il.com>,
Deepak R Varma <drv@...lo.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Tsuchiya Yuto <kitakar@...il.com>,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linux-staging@...ts.linux.dev
Subject: [PATCH 04/13] media: atomisp: sh_css_mipi: cleanup the code
With the ISP2401 firmware we're using, the code differences
are not that much from ISP2400. Cleanup the code in order
to make it closer to Intel Aero driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 00/13] at: https://lore.kernel.org/all/cover.1637140900.git.mchehab+huawei@kernel.org/
.../staging/media/atomisp/pci/sh_css_mipi.c | 159 +++++-------------
.../staging/media/atomisp/pci/sh_css_mipi.h | 15 --
2 files changed, 38 insertions(+), 136 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index cfaa4719177c..0acf75497ae7 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -33,47 +33,6 @@
static u32
ref_count_mipi_allocation[N_CSI_PORTS]; /* Initialized in mipi_init */
-/*
- * Check if a source port or TPG/PRBS ID is valid
- */
-static bool ia_css_mipi_is_source_port_valid(struct ia_css_pipe *pipe,
- unsigned int *pport)
-{
- bool ret = true;
- unsigned int port = 0;
- unsigned int max_ports = 0;
-
- switch (pipe->stream->config.mode) {
- case IA_CSS_INPUT_MODE_BUFFERED_SENSOR:
- port = (unsigned int)pipe->stream->config.source.port.port;
- max_ports = N_CSI_PORTS;
- break;
- case IA_CSS_INPUT_MODE_TPG:
- port = (unsigned int)pipe->stream->config.source.tpg.id;
- max_ports = N_CSS_TPG_IDS;
- break;
- case IA_CSS_INPUT_MODE_PRBS:
- port = (unsigned int)pipe->stream->config.source.prbs.id;
- max_ports = N_CSS_PRBS_IDS;
- break;
- default:
- assert(false);
- ret = false;
- break;
- }
-
- if (ret) {
- assert(port < max_ports);
-
- if (port >= max_ports)
- ret = false;
- }
-
- *pport = port;
-
- return ret;
-}
-
/* Assumptions:
* - A line is multiple of 4 bytes = 1 word.
* - Each frame has SOF and EOF (each 1 word).
@@ -227,6 +186,10 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
return err;
}
+/*
+ * Check if a source port or TPG/PRBS ID is valid
+ */
+
#if !defined(ISP2401)
int
ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
@@ -272,16 +235,20 @@ bool mipi_is_free(void)
return true;
}
-int
-calculate_mipi_buff_size(
- struct ia_css_stream_config *stream_cfg,
- unsigned int *size_mem_words)
+#if defined(ISP2401)
+/*
+ * @brief Calculate the required MIPI buffer sizes.
+ * Based on the stream configuration, calculate the
+ * required MIPI buffer sizes (in DDR words).
+ *
+ * @param[in] stream_cfg Point to the target stream configuration
+ * @param[out] size_mem_words MIPI buffer size in DDR words.
+ *
+ * @return
+ */
+static int calculate_mipi_buff_size(struct ia_css_stream_config *stream_cfg,
+ unsigned int *size_mem_words)
{
-#if !defined(ISP2401)
- int err = -EINVAL;
- (void)stream_cfg;
- (void)size_mem_words;
-#else
unsigned int width;
unsigned int height;
enum atomisp_input_format format;
@@ -373,26 +340,9 @@ calculate_mipi_buff_size(
*size_mem_words = mem_words_per_buff;
IA_CSS_LEAVE_ERR(err);
-#endif
return err;
}
-
-static bool buffers_needed(struct ia_css_pipe *pipe)
-{
- if (!IS_ISP2401) {
- if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR)
- return true;
- else
- return false;
- }
-
- if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR ||
- pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG ||
- pipe->stream->config.mode == IA_CSS_INPUT_MODE_PRBS)
- return true;
-
- return false;
-}
+#endif
int
allocate_mipi_frames(struct ia_css_pipe *pipe,
@@ -422,45 +372,25 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
}
#endif
-
- if (!buffers_needed(pipe)) {
+ if (pipe->stream->config.mode != IA_CSS_INPUT_MODE_BUFFERED_SENSOR) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"allocate_mipi_frames(%p) exit: no buffers needed for pipe mode.\n",
pipe);
return 0; /* AM TODO: Check */
}
- if (!IS_ISP2401) {
- port = (unsigned int)pipe->stream->config.source.port.port;
- } else {
- /* Returns true if port is valid. So, invert it */
- err = !ia_css_mipi_is_source_port_valid(pipe, &port);
- }
-
- assert(port < N_CSI_PORTS);
-
- if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
- (IS_ISP2401 && err)) {
+ port = (unsigned int)pipe->stream->config.source.port.port;
+ if (port >= N_CSI_PORTS) {
IA_CSS_ERROR("allocate_mipi_frames(%p) exit: port is not correct (port=%d).",
pipe, port);
return -EINVAL;
}
#ifdef ISP2401
- err = calculate_mipi_buff_size(
- &pipe->stream->config,
- &my_css.mipi_frame_size[port]);
-#endif
-
-#if !defined(ISP2401)
- if (ref_count_mipi_allocation[port] != 0) {
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
- "allocate_mipi_frames(%p) exit: already allocated for this port (port=%d).\n",
- pipe, port);
- return 0;
- }
-#else
- /* 2401 system allows multiple streams to use same physical port. This is not
+ err = calculate_mipi_buff_size(&pipe->stream->config,
+ &my_css.mipi_frame_size[port]);
+ /*
+ * 2401 system allows multiple streams to use same physical port. This is not
* true for 2400 system. Currently 2401 uses MIPI buffers as a temporary solution.
* TODO AM: Once that is changed (removed) this code should be removed as well.
* In that case only 2400 related code should remain.
@@ -472,6 +402,13 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
pipe, port);
return 0;
}
+#else
+ if (ref_count_mipi_allocation[port] != 0) {
+ ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
+ "allocate_mipi_frames(%p) exit: already allocated for this port (port=%d).\n",
+ pipe, port);
+ return 0;
+ }
#endif
ref_count_mipi_allocation[port]++;
@@ -552,23 +489,15 @@ free_mipi_frames(struct ia_css_pipe *pipe)
return -EINVAL;
}
- if (!buffers_needed(pipe)) {
+ if (pipe->stream->config.mode != IA_CSS_INPUT_MODE_BUFFERED_SENSOR) {
IA_CSS_ERROR("free_mipi_frames(%p) exit: wrong mode.",
pipe);
return err;
}
- if (!IS_ISP2401) {
- port = (unsigned int)pipe->stream->config.source.port.port;
- } else {
- /* Returns true if port is valid. So, invert it */
- err = !ia_css_mipi_is_source_port_valid(pipe, &port);
- }
+ port = (unsigned int)pipe->stream->config.source.port.port;
- assert(port < N_CSI_PORTS);
-
- if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
- (IS_ISP2401 && err)) {
+ if (port >= N_CSI_PORTS) {
IA_CSS_ERROR("free_mipi_frames(%p, %d) exit: pipe port is not correct.",
pipe, port);
return err;
@@ -647,11 +576,7 @@ send_mipi_frames(struct ia_css_pipe *pipe)
{
int err = -EINVAL;
unsigned int i;
-#ifndef ISP2401
unsigned int port;
-#else
- unsigned int port = 0;
-#endif
IA_CSS_ENTER_PRIVATE("pipe=%p", pipe);
@@ -664,23 +589,15 @@ send_mipi_frames(struct ia_css_pipe *pipe)
/* multi stream video needs mipi buffers */
/* nothing to be done in other cases. */
- if (!buffers_needed(pipe)) {
+ if (pipe->stream->config.mode != IA_CSS_INPUT_MODE_BUFFERED_SENSOR) {
IA_CSS_LOG("nothing to be done for this mode");
return 0;
/* TODO: AM: maybe this should be returning an error. */
}
- if (!IS_ISP2401) {
- port = (unsigned int)pipe->stream->config.source.port.port;
- } else {
- /* Returns true if port is valid. So, invert it */
- err = !ia_css_mipi_is_source_port_valid(pipe, &port);
- }
+ port = (unsigned int)pipe->stream->config.source.port.port;
- assert(port < N_CSI_PORTS);
-
- if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
- (IS_ISP2401 && err)) {
+ if (port >= N_CSI_PORTS) {
IA_CSS_ERROR("send_mipi_frames(%p) exit: invalid port specified (port=%d).",
pipe, port);
return err;
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.h b/drivers/staging/media/atomisp/pci/sh_css_mipi.h
index dffec2205620..e6c86d0ac483 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.h
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.h
@@ -34,19 +34,4 @@ free_mipi_frames(struct ia_css_pipe *pipe);
int
send_mipi_frames(struct ia_css_pipe *pipe);
-/**
- * @brief Calculate the required MIPI buffer sizes.
- * Based on the stream configuration, calculate the
- * required MIPI buffer sizes (in DDR words).
- *
- * @param[in] stream_cfg Point to the target stream configuration
- * @param[out] size_mem_words MIPI buffer size in DDR words.
- *
- * @return
- */
-int
-calculate_mipi_buff_size(
- struct ia_css_stream_config *stream_cfg,
- unsigned int *size_mem_words);
-
#endif /* __SH_CSS_MIPI_H */
--
2.33.1
Powered by blists - more mailing lists