linux-kernel - Re: [PATCH v2 3/4] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Fri, 19 Nov 2021 01:04:11 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Andy Gross <agross@...nel.org>
Cc:     Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Amit Kucheria <amitk@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Thara Gopinath <thara.gopinath@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/4] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor
 node

On 24/09/2021 00:23, Bjorn Andersson wrote:
> Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is
> used to connect thermal zones with ADC channels.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>

> ---
> 
> Changes since v1:
> - New patch
> 
>   arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index 6f5bb6b37ec2..d09f2954b6f9 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -84,6 +84,16 @@ adc-chan@6 {
>   			};
>   		};
>   
> +		pm8998_adc_tm: adc-tm@...0 {
> +			compatible = "qcom,spmi-adc-tm-hc";
> +			reg = <0x3400>;
> +			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>   		rtc@...0 {
>   			compatible = "qcom,pm8941-rtc";
>   			reg = <0x6000>, <0x6100>;
> 


-- 
With best wishes
Dmitry