| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YZcfLkzinKwKhhJK@builder.lan>
Date: Thu, 18 Nov 2021 21:51:10 -0600
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Katherine Perez <kaperez@...ux.microsoft.com>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Felipe Balbi <balbi@...nel.org>
Subject: Re: [RESEND PATCH 1/2] arm64: dts: add minimal DTS for Microsoft
Surface Duo2
On Tue 16 Nov 17:50 CST 2021, Katherine Perez wrote:
> This is a minimal devicetree for Microsoft Surface Duo 2 with SM8350
> Chipset
>
Thanks Katherine, really nice to see this initial support. Looking
forward to see it grow. Just two small nits below.
> Signed-off-by: Katherine Perez <kaperez@...ux.microsoft.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../qcom/sm8350-microsoft-surface-duo2.dts | 363 ++++++++++++++++++
> 2 files changed, 364 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 6b816eb33309..a8cc6bd3c423 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -106,4 +106,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
> new file mode 100644
> index 000000000000..941eac43614f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
> @@ -0,0 +1,363 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (C) 2021, Microsoft Corporation
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sm8350.dtsi"
> +#include "pm8350.dtsi"
> +#include "pm8350b.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +#include "pmr735a.dtsi"
> +#include "pmr735b.dtsi"
> +
> +/ {
> + model = "Microsoft Surface Duo 2";
> + compatible = "microsoft,surface-duo2", "qcom,sm8350";
> +
Can you please add:
chassis-type = "handset";
> + aliases {
> + serial0 = &uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&adsp {
> + status = "okay";
> + firmware-name = "qcom/sm8350/adsp.mbn";
I have hopes that we'll be able to push some engineering signed versions
of these firmware files, for e.g. the SM8350 HDK one day.
When that happens that would conflict with your firmware path and I
don't expect your devices to accept the "invalid" signature of those
files.
So I would prefer if you follow Felipe's naming scheme and put these
(this and the other remoteprocs) in:
qcom/sm8350/microsoft/*
Thanks,
Bjorn
> +};
> +
> +&apps_rsc {
> + pm8350-rpmh-regulators {
> + compatible = "qcom,pm8350-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> + vdd-s11-supply = <&vph_pwr>;
> + vdd-s12-supply = <&vph_pwr>;
> +
> + vdd-l1-l4-supply = <&vreg_s11b_0p95>;
> + vdd-l2-l7-supply = <&vreg_bob>;
> + vdd-l3-l5-supply = <&vreg_bob>;
> + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
> + vdd-l8-supply = <&vreg_s2c_0p8>;
> +
> + vreg_s10b_1p8: smps10 {
> + regulator-name = "vreg_s10b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vreg_s11b_0p95: smps11 {
> + regulator-name = "vreg_s11b_0p95";
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + vreg_s12b_1p25: smps12 {
> + regulator-name = "vreg_s12b_1p25";
> + regulator-min-microvolt = <1224000>;
> + regulator-max-microvolt = <1360000>;
> + };
> +
> + vreg_l1b_0p88: ldo1 {
> + regulator-name = "vreg_l1b_0p88";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p07: ldo2 {
> + regulator-name = "vreg_l2b_3p07";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3b_0p9: ldo3 {
> + regulator-name = "vreg_l3b_0p9";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5b_0p88: ldo5 {
> + regulator-name = "vreg_l3b_0p9";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <888000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p2: ldo6 {
> + regulator-name = "vreg_l6b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1208000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p96: ldo7 {
> + regulator-name = "vreg_l7b_2p96";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_1p2: ldo9 {
> + regulator-name = "vreg_l9b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + pm8350c-rpmh-regulators {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> +
> + vdd-l1-l12-supply = <&vreg_s1c_1p86>;
> + vdd-l2-l8-supply = <&vreg_s1c_1p86>;
> + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
> + vdd-l6-l9-l11-supply = <&vreg_bob>;
> + vdd-l10-supply = <&vreg_s12b_1p25>;
> +
> + vdd-bob-supply = <&vph_pwr>;
> +
> + vreg_s1c_1p86: smps1 {
> + regulator-name = "vreg_s1c_1p86";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1952000>;
> + };
> +
> + vreg_s2c_0p8: smps2 {
> + regulator-name = "vreg_s2c_0p8";
> + regulator-min-microvolt = <640000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + vreg_s10c_1p05: smps10 {
> + regulator-name = "vreg_s10c_1p05";
> + regulator-min-microvolt = <1048000>;
> + regulator-max-microvolt = <1128000>;
> + };
> +
> + vreg_bob: bob {
> + regulator-name = "vreg_bob";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> + };
> +
> + vreg_l1c_1p8: ldo1 {
> + regulator-name = "vreg_l1c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_1p8: ldo2 {
> + regulator-name = "vreg_l2c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_3p0: ldo3 {
> + regulator-name = "vreg_l3c_3p0";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c_uim1: ldo4 {
> + regulator-name = "vreg_l4c_uim1";
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5c_uim2: ldo5 {
> + regulator-name = "vreg_l5c_uim2";
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6c_1p8: ldo6 {
> + regulator-name = "vreg_l6c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7c_3p0: ldo7 {
> + regulator-name = "vreg_l7c_3p0";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8c_1p8: ldo8 {
> + regulator-name = "vreg_l8c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9c_2p96: ldo9 {
> + regulator-name = "vreg_l9c_2p96";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c_1p2: ldo10 {
> + regulator-name = "vreg_l10c_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_2p96: ldo11 {
> + regulator-name = "vreg_l11c_2p96";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12c_1p8: ldo12 {
> + regulator-name = "vreg_l12c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13c_3p0: ldo13 {
> + regulator-name = "vreg_l13c_3p0";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&cdsp {
> + status = "okay";
> + firmware-name = "qcom/sm8350/cdsp.mbn";
> +};
> +
> +&ipa {
> + status = "okay";
> +
> + memory-region = <&pil_ipa_fw_mem>;
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&slpi {
> + status = "okay";
> + firmware-name = "qcom/sm8350/slpi.mbn";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <9 8>;
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&ufs_mem_hc {
> + status = "okay";
> +
> + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l7b_2p96>;
> + vcc-max-microamp = <800000>;
> + vccq-supply = <&vreg_l9b_1p2>;
> + vccq-max-microamp = <900000>;
> +};
> +
> +&ufs_mem_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l5b_0p88>;
> + vdda-max-microamp = <91600>;
> + vdda-pll-supply = <&vreg_l6b_1p2>;
> + vdda-pll-max-microamp = <19000>;
> +};
> +
> +&usb_1 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l5b_0p88>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> + vdda33-supply = <&vreg_l2b_3p07>;
> +};
> +
> +&usb_1_qmpphy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l6b_1p2>;
> + vdda-pll-supply = <&vreg_l1b_0p88>;
> +};
> +
> +&usb_2 {
> + status = "okay";
> +};
> +
> +&usb_2_hsphy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l5b_0p88>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> + vdda33-supply = <&vreg_l2b_3p07>;
> +};
> +
> +&usb_2_qmpphy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l6b_1p2>;
> + vdda-pll-supply = <&vreg_l5b_0p88>;
> +};
> --
> 2.31.1
>
Powered by blists - more mailing lists