| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPwXO5bHG7WmPLFFN429VGV7ra4V9ZvT5WfDMwdXOCvS3_x9jA@mail.gmail.com>
Date: Fri, 19 Nov 2021 10:18:24 +0100
From: Petr Benes <petrben@...il.com>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Michal Vokáč <michal.vokac@...ft.com>,
linux-pm@...r.kernel.org, Amit Kucheria <amitk@...nel.org>,
linux-kernel@...r.kernel.org,
Andrzej Pietrasiewicz <andrzej.p@...labora.com>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
Zhang Rui <rui.zhang@...el.com>,
Fabio Estevam <festevam@...il.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3] thermal: imx: implement runtime PM support
Hello everybody,
If this issue is about to close. Appending my tag.
Fixes: d92ed2c9d3ff ("thermal: imx: Use driver's local data to decide
whether to run a measurement")
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
Tested-by: Petr Beneš <petr.benes@...ft.com>
Thank you for the fix.
Petr
On Thu, 18 Nov 2021 at 11:05, Petr Benes <petrben@...il.com> wrote:
>
> Works for me! Well done.
>
> On Wed, 17 Nov 2021 at 11:37, Oleksij Rempel <o.rempel@...gutronix.de> wrote:
> >
> > Petr, Michal,
> >
> > can you please test this patch.
> >
> > On Wed, Nov 17, 2021 at 11:34:26AM +0100, Oleksij Rempel wrote:
> > > Starting with commit d92ed2c9d3ff ("thermal: imx: Use driver's local
> > > data to decide whether to run a measurement") this driver stared using
> > > irq_enabled flag to make decision to power on/off the thermal core. This
> > > triggered a regression, where after reaching critical temperature, alarm
> > > IRQ handler set irq_enabled to false, disabled thermal core and was not
> > > able read temperature and disable cooling sequence.
> > >
> > > In case the cooling device is "CPU/GPU freq", the system will run with
> > > reduce performance until next reboot.
> > >
> > > To solve this issue, we need to move all parts implementing hand made
> > > runtime power management and let it handle actual runtime PM framework.
> > >
> > > Fixes: d92ed2c9d3ff ("thermal: imx: Use driver's local data to decide whether to run a measurement")
> > > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > > ---
> > > drivers/thermal/imx_thermal.c | 145 +++++++++++++++++++++-------------
> > > 1 file changed, 91 insertions(+), 54 deletions(-)
> > >
> > > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> > > index 2c7473d86a59..16663373b682 100644
> > > --- a/drivers/thermal/imx_thermal.c
> > > +++ b/drivers/thermal/imx_thermal.c
> > > @@ -15,6 +15,7 @@
> > > #include <linux/regmap.h>
> > > #include <linux/thermal.h>
> > > #include <linux/nvmem-consumer.h>
> > > +#include <linux/pm_runtime.h>
> > >
> > > #define REG_SET 0x4
> > > #define REG_CLR 0x8
> > > @@ -194,6 +195,7 @@ static struct thermal_soc_data thermal_imx7d_data = {
> > > };
> > >
> > > struct imx_thermal_data {
> > > + struct device *dev;
> > > struct cpufreq_policy *policy;
> > > struct thermal_zone_device *tz;
> > > struct thermal_cooling_device *cdev;
> > > @@ -252,44 +254,15 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
> > > const struct thermal_soc_data *soc_data = data->socdata;
> > > struct regmap *map = data->tempmon;
> > > unsigned int n_meas;
> > > - bool wait, run_measurement;
> > > u32 val;
> > > + int ret;
> > >
> > > - run_measurement = !data->irq_enabled;
> > > - if (!run_measurement) {
> > > - /* Check if a measurement is currently in progress */
> > > - regmap_read(map, soc_data->temp_data, &val);
> > > - wait = !(val & soc_data->temp_valid_mask);
> > > - } else {
> > > - /*
> > > - * Every time we measure the temperature, we will power on the
> > > - * temperature sensor, enable measurements, take a reading,
> > > - * disable measurements, power off the temperature sensor.
> > > - */
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
> > > - soc_data->power_down_mask);
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> > > - soc_data->measure_temp_mask);
> > > -
> > > - wait = true;
> > > - }
> > > -
> > > - /*
> > > - * According to the temp sensor designers, it may require up to ~17us
> > > - * to complete a measurement.
> > > - */
> > > - if (wait)
> > > - usleep_range(20, 50);
> > > + ret = pm_runtime_resume_and_get(data->dev);
> > > + if (ret < 0)
> > > + return ret;
> > >
> > > regmap_read(map, soc_data->temp_data, &val);
> > >
> > > - if (run_measurement) {
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
> > > - soc_data->measure_temp_mask);
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> > > - soc_data->power_down_mask);
> > > - }
> > > -
> > > if ((val & soc_data->temp_valid_mask) == 0) {
> > > dev_dbg(&tz->device, "temp measurement never finished\n");
> > > return -EAGAIN;
> > > @@ -328,6 +301,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
> > > enable_irq(data->irq);
> > > }
> > >
> > > + pm_runtime_put(data->dev);
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -335,24 +310,16 @@ static int imx_change_mode(struct thermal_zone_device *tz,
> > > enum thermal_device_mode mode)
> > > {
> > > struct imx_thermal_data *data = tz->devdata;
> > > - struct regmap *map = data->tempmon;
> > > - const struct thermal_soc_data *soc_data = data->socdata;
> > >
> > > if (mode == THERMAL_DEVICE_ENABLED) {
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
> > > - soc_data->power_down_mask);
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> > > - soc_data->measure_temp_mask);
> > > + pm_runtime_get(data->dev);
> > >
> > > if (!data->irq_enabled) {
> > > data->irq_enabled = true;
> > > enable_irq(data->irq);
> > > }
> > > } else {
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
> > > - soc_data->measure_temp_mask);
> > > - regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> > > - soc_data->power_down_mask);
> > > + pm_runtime_put(data->dev);
> > >
> > > if (data->irq_enabled) {
> > > disable_irq(data->irq);
> > > @@ -393,6 +360,11 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
> > > int temp)
> > > {
> > > struct imx_thermal_data *data = tz->devdata;
> > > + int ret;
> > > +
> > > + ret = pm_runtime_resume_and_get(data->dev);
> > > + if (ret < 0)
> > > + return ret;
> > >
> > > /* do not allow changing critical threshold */
> > > if (trip == IMX_TRIP_CRITICAL)
> > > @@ -406,6 +378,8 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
> > >
> > > imx_set_alarm_temp(data, temp);
> > >
> > > + pm_runtime_put(data->dev);
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -681,6 +655,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
> > > if (!data)
> > > return -ENOMEM;
> > >
> > > + data->dev = &pdev->dev;
> > > +
> > > map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
> > > if (IS_ERR(map)) {
> > > ret = PTR_ERR(map);
> > > @@ -800,6 +776,16 @@ static int imx_thermal_probe(struct platform_device *pdev)
> > > data->socdata->power_down_mask);
> > > regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
> > > data->socdata->measure_temp_mask);
> > > + /* After power up, we need a delay before first access can be done. */
> > > + usleep_range(20, 50);
> > > +
> > > + /* the core was configured and enabled just before */
> > > + pm_runtime_set_active(&pdev->dev);
> > > + pm_runtime_enable(data->dev);
> > > +
> > > + ret = pm_runtime_resume_and_get(data->dev);
> > > + if (ret < 0)
> > > + goto disable_runtime_pm;
> > >
> > > data->irq_enabled = true;
> > > ret = thermal_zone_device_enable(data->tz);
> > > @@ -814,10 +800,15 @@ static int imx_thermal_probe(struct platform_device *pdev)
> > > goto thermal_zone_unregister;
> > > }
> > >
> > > + pm_runtime_put(data->dev);
> > > +
> > > return 0;
> > >
> > > thermal_zone_unregister:
> > > thermal_zone_device_unregister(data->tz);
> > > +disable_runtime_pm:
> > > + pm_runtime_put_noidle(data->dev);
> > > + pm_runtime_disable(data->dev);
> > > clk_disable:
> > > clk_disable_unprepare(data->thermal_clk);
> > > legacy_cleanup:
> > > @@ -829,13 +820,9 @@ static int imx_thermal_probe(struct platform_device *pdev)
> > > static int imx_thermal_remove(struct platform_device *pdev)
> > > {
> > > struct imx_thermal_data *data = platform_get_drvdata(pdev);
> > > - struct regmap *map = data->tempmon;
> > >
> > > - /* Disable measurements */
> > > - regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
> > > - data->socdata->power_down_mask);
> > > - if (!IS_ERR(data->thermal_clk))
> > > - clk_disable_unprepare(data->thermal_clk);
> > > + pm_runtime_put_noidle(data->dev);
> > > + pm_runtime_disable(data->dev);
> > >
> > > thermal_zone_device_unregister(data->tz);
> > > imx_thermal_unregister_legacy_cooling(data);
> > > @@ -858,29 +845,79 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
> > > ret = thermal_zone_device_disable(data->tz);
> > > if (ret)
> > > return ret;
> > > +
> > > + return pm_runtime_force_suspend(data->dev);
> > > +}
> > > +
> > > +static int __maybe_unused imx_thermal_resume(struct device *dev)
> > > +{
> > > + struct imx_thermal_data *data = dev_get_drvdata(dev);
> > > + int ret;
> > > +
> > > + ret = pm_runtime_force_resume(data->dev);
> > > + if (ret)
> > > + return ret;
> > > + /* Enabled thermal sensor after resume */
> > > + return thermal_zone_device_enable(data->tz);
> > > +}
> > > +
> > > +static int __maybe_unused imx_thermal_runtime_suspend(struct device *dev)
> > > +{
> > > + struct imx_thermal_data *data = dev_get_drvdata(dev);
> > > + const struct thermal_soc_data *socdata = data->socdata;
> > > + struct regmap *map = data->tempmon;
> > > + int ret;
> > > +
> > > + ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
> > > + socdata->measure_temp_mask);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
> > > + socdata->power_down_mask);
> > > + if (ret)
> > > + return ret;
> > > +
> > > clk_disable_unprepare(data->thermal_clk);
> > >
> > > return 0;
> > > }
> > >
> > > -static int __maybe_unused imx_thermal_resume(struct device *dev)
> > > +static int __maybe_unused imx_thermal_runtime_resume(struct device *dev)
> > > {
> > > struct imx_thermal_data *data = dev_get_drvdata(dev);
> > > + const struct thermal_soc_data *socdata = data->socdata;
> > > + struct regmap *map = data->tempmon;
> > > int ret;
> > >
> > > ret = clk_prepare_enable(data->thermal_clk);
> > > if (ret)
> > > return ret;
> > > - /* Enabled thermal sensor after resume */
> > > - ret = thermal_zone_device_enable(data->tz);
> > > +
> > > + ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
> > > + socdata->power_down_mask);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
> > > + socdata->measure_temp_mask);
> > > if (ret)
> > > return ret;
> > >
> > > + /*
> > > + * According to the temp sensor designers, it may require up to ~17us
> > > + * to complete a measurement.
> > > + */
> > > + usleep_range(20, 50);
> > > +
> > > return 0;
> > > }
> > >
> > > -static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
> > > - imx_thermal_suspend, imx_thermal_resume);
> > > +static const struct dev_pm_ops imx_thermal_pm_ops = {
> > > + SET_SYSTEM_SLEEP_PM_OPS(imx_thermal_suspend, imx_thermal_resume)
> > > + SET_RUNTIME_PM_OPS(imx_thermal_runtime_suspend,
> > > + imx_thermal_runtime_resume, NULL)
> > > +};
> > >
> > > static struct platform_driver imx_thermal = {
> > > .driver = {
> > > --
> > > 2.30.2
> > >
> > >
> > >
> >
> > --
> > Pengutronix e.K. | |
> > Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists