[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <619709b5.1c69fb81.83cb5.4150@mx.google.com>
Date: Fri, 19 Nov 2021 03:19:30 +0100
From: Ansuel Smith <ansuelsmth@...il.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Russell King <linux@...linux.org.uk>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [net-next PATCH 14/19] net: dsa: qca8k: add support for
mdb_add/del
On Fri, Nov 19, 2021 at 04:06:57AM +0200, Vladimir Oltean wrote:
> On Wed, Nov 17, 2021 at 10:04:46PM +0100, Ansuel Smith wrote:
> > Add support for mdb add/del function. The ARL table is used to insert
> > the rule. A new search function is introduced to search the rule and add
> > additional port to it. If every port is removed from the rule, it's
> > removed. It's set STATIC in the ARL table (aka it doesn't age) to not be
> > flushed by fast age function.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
> > ---
> > drivers/net/dsa/qca8k.c | 82 +++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 82 insertions(+)
> >
> > diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> > index dda99263fe8c..a217c842ab45 100644
> > --- a/drivers/net/dsa/qca8k.c
> > +++ b/drivers/net/dsa/qca8k.c
> > @@ -417,6 +417,23 @@ qca8k_fdb_flush(struct qca8k_priv *priv)
> > mutex_unlock(&priv->reg_mutex);
> > }
> >
> > +static int
> > +qca8k_fdb_search(struct qca8k_priv *priv, struct qca8k_fdb *fdb, const u8 *mac, u16 vid)
> > +{
> > + int ret;
> > +
> > + mutex_lock(&priv->reg_mutex);
>
> If I were you, I'd create a locking scheme where the entire FDB entry is
> updated under the same critical section. Right now you're relying on the
> rtnl_mutex serializing calls to ->port_mdb_add()/->port_mdb_del(). But
> that might change. Don't leave that task to someone that has non-expert
> knowledge of the driver.
>
Ok will change the logic and do the search and add/del operation in one
lock.
> > + qca8k_fdb_write(priv, vid, 0, mac, 0);
> > + ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + ret = qca8k_fdb_read(priv, fdb);
> > +exit:
> > + mutex_unlock(&priv->reg_mutex);
> > + return ret;
> > +}
> > +
> > static int
> > qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
> > {
> > @@ -1959,6 +1976,69 @@ qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
> > return 0;
> > }
> >
> > +static int
> > +qca8k_port_mdb_add(struct dsa_switch *ds, int port,
> > + const struct switchdev_obj_port_mdb *mdb)
> > +{
> > + struct qca8k_priv *priv = ds->priv;
> > + struct qca8k_fdb fdb = { 0 };
> > + const u8 *addr = mdb->addr;
> > + u8 port_mask = BIT(port);
>
> This doesn't really need to be kept in a temporary variable as it is
> only used once.
>
> > + u16 vid = mdb->vid;
> > + int ret;
> > +
> > + /* Check if entry already exist */
> > + ret = qca8k_fdb_search(priv, &fdb, addr, vid);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Rule exist. Delete first */
> > + if (!fdb.aging) {
> > + ret = qca8k_fdb_del(priv, addr, fdb.port_mask, vid);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + /* Add port to fdb portmask */
> > + fdb.port_mask |= port_mask;
> > +
> > + return qca8k_port_fdb_insert(priv, addr, fdb.port_mask, vid);
> > +}
> > +
> > +static int
> > +qca8k_port_mdb_del(struct dsa_switch *ds, int port,
> > + const struct switchdev_obj_port_mdb *mdb)
> > +{
> > + struct qca8k_priv *priv = ds->priv;
> > + struct qca8k_fdb fdb = { 0 };
> > + const u8 *addr = mdb->addr;
> > + u8 port_mask = BIT(port);
> > + u16 vid = mdb->vid;
> > + int ret;
> > +
> > + /* Check if entry already exist */
> > + ret = qca8k_fdb_search(priv, &fdb, addr, vid);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Rule doesn't exist. Why delete? */
>
> Because refcounting is hard. In fact with VLANs it is quite possible to
> delete an absent entry. For MDBs and FDBs, the bridge should now error
> out before it even reaches to you.
>
So in this specific case I should simply return 0 to correctly decrement
the ref, correct?
> > + if (!fdb.aging)
> > + return -EINVAL;
> > +
> > + ret = qca8k_fdb_del(priv, addr, port_mask, vid);
> > + if (ret)
> > + return ret;
> > +
> > + /* Only port in the rule is this port. Don't re insert */
> > + if (fdb.port_mask == port_mask)
> > + return 0;
> > +
> > + /* Remove port from port mask */
> > + fdb.port_mask &= ~port_mask;
> > +
> > + return qca8k_port_fdb_insert(priv, addr, fdb.port_mask, vid);
> > +}
> > +
> > static int
> > qca8k_port_mirror_add(struct dsa_switch *ds, int port,
> > struct dsa_mall_mirror_tc_entry *mirror,
> > @@ -2160,6 +2240,8 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
> > .port_fdb_add = qca8k_port_fdb_add,
> > .port_fdb_del = qca8k_port_fdb_del,
> > .port_fdb_dump = qca8k_port_fdb_dump,
> > + .port_mdb_add = qca8k_port_mdb_add,
> > + .port_mdb_del = qca8k_port_mdb_del,
> > .port_mirror_add = qca8k_port_mirror_add,
> > .port_mirror_del = qca8k_port_mirror_del,
> > .port_vlan_filtering = qca8k_port_vlan_filtering,
> > --
> > 2.32.0
> >
>
--
Ansuel
Powered by blists - more mailing lists