linux-kernel - [PATCH 0/2] dts: Add CEC clock to DW HDMI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211120073448.32480-1-jernej.skrabec@gmail.com>
Date:   Sat, 20 Nov 2021 08:34:46 +0100
From:   Jernej Skrabec <jernej.skrabec@...il.com>
To:     mripard@...nel.org, wens@...e.org
Cc:     robh+dt@...nel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
        linux-kernel@...r.kernel.org,
        Jernej Skrabec <jernej.skrabec@...il.com>
Subject: [PATCH 0/2] dts: Add CEC clock to DW HDMI

Experimentation proved that CEC controller in H3-like DW-HDMI core
depends on 32 kHz clock output from RTC. If board has external 32768 Hz
crystal, HDMI CEC always work. However, if external crystal is missing
and 32 kHz clock is generated by internal oscillator, CEC communication
may or may not work, depending on accuracy. Changing internal oscillator
prescaler can make CEC work.

This was totally missed when implementing HDMI support, because user
manual has no CEC information besides the fact that it exists.

Please take a look.

Best regards,
Jernej

Jernej Skrabec (2):
  arm64: dts: allwinner: a64: Add CEC clock to HDMI
  ARM: dts: sunxi: Add CEC clock to DW-HDMI

 arch/arm/boot/dts/sun8i-r40.dtsi              | 4 ++--
 arch/arm/boot/dts/sunxi-h3-h5.dtsi            | 4 ++--
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

-- 
2.34.0