| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHCN7x+G6K3BTEGwuYMRO_+SFHjrvAU2FWfXGawXchX8NmovWA@mail.gmail.com>
Date: Sat, 20 Nov 2021 10:03:35 -0600
From: Adam Ford <aford173@...il.com>
To: linux-media <linux-media@...r.kernel.org>
Cc: Tim Harvey <tharvey@...eworks.com>,
Schrempf Frieder <frieder.schrempf@...tron.de>,
Marek Vasut <marek.vasut@...il.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Adam Ford-BE <aford@...conembedded.com>,
cstevens@...conembedded.com,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Philipp Zabel <p.zabel@...gutronix.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Heiko Stuebner <heiko@...ech.de>,
Lucas Stach <l.stach@...gutronix.de>,
Joakim Zhang <qiangqing.zhang@....com>,
Alice Guo <alice.guo@....com>, Peng Fan <peng.fan@....com>,
"open list:HANTRO VPU CODEC DRIVER"
<linux-rockchip@...ts.infradead.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:STAGING SUBSYSTEM" <linux-staging@...ts.linux.dev>,
Nicolas Dufresne <nicolas@...fresne.ca>
Subject: Re: [RFC 1/5] media: hantro: Add support for i.MX8M Mini
On Sat, Nov 6, 2021 at 1:38 PM Adam Ford <aford173@...il.com> wrote:
>
> The i.MX8M Mini has a similar implementation of the Hantro G1 and
> G2 decoders, but the Mini uses the vpu-blk-ctrl for handling the
> VPU resets through the power domain system. As such, there are
> functions present in the 8MQ that are not applicable to the Mini
> which requires the driver to have a different compatible flags.
>
+ Nicolas Dufresne
>From what I can tell, the implementation between 8MQ and 8MM for the
G2 is basically the same with the only be difference being the
power-domain controller handling the vpu-blk-ctrl stuff in the Mini.
It doesn't hang, so I don't think the power-domain is a problem, but
the G2 throws some splat when v4l2-compliance is invoked.
# v4l2-compliance -d1
v4l2-compliance SHA: not available
, 64 bits, 64-bit time_t
Compliance test for hantro-vpu device /dev/video1:
Driver Info:
Driver name : hantro-vpu
Card type : nxp,imx8mm-vpu-g2-dec
Bus info : platform: hantro-vpu
Driver v[ 30.136983] ------------[ cut here ]------------
[ 30.142038] WARNING: CPU: 3 PID: 534 at mm/page_alloc.c:5344
__alloc_pages+0x5b4/0xbe0
[ 30.149971] Modules linked in: 8021q garp mrp stp llc af_alg
caam_jr caamhash_desc caamalg_desc crypto_engine rng_core authenc
libdes crct10dif_ce snd_soc_fsl_asoc_card snd_soc_imx_audmux
snd_soc_simple_card_utils fsl_imx8_ddr_perf imx8m_ddrc hantro_vpu(C)
v4l2_h264 brcmfmac v4l2_mem2mem videobuf2_vmalloc brcmutil
videobuf2_dma_contig cfg80211 videobuf2_memops videobuf2_v4l2
videobuf2_common snd_soc_wm8962 videodev hci_uart mc etnaviv gpu_sched
btqca btbcm caam rtc_pcf85363 clk_bd718x7 at24 spi_imx spi_bitbang
rtc_snvs error snvs_pwrkey snd_soc_fsl_sai imx_pcm_dma imx8mm_thermal
imx_cpufreq_dt bluetooth ecdh_generic ecc rfkill fuse drm ipv6
[ 30.206845] CPU: 3 PID: 534 Comm: v4l2-compliance Tainted: G
C 5.16.0-rc1-00292-gb166e5dc4755-dirty #19
[ 30.217544] Hardware name: Beacon EmbeddedWorks i.MX8M Mini
Development Kit (DT)
[ 30.224940] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 30.231904] pc : __alloc_pages+0x5b4/0xbe0
[ 30.236007] lr : __dma_direct_alloc_pages+0x17c/0x1e0
[ 30.241065] sp : ffff80001265b810
[ 30.244379] x29: ffff80001265b810 x28: 0000000000000034 x27: ffff00000b9ec220
[ 30.251523] x26: ffff00000038d810 x25: 0000000000000000 x24: ffff00000038d810
[ 30.258668] x23: ffff80001010c52c x22: ffff00000038d810 x21: 00000000ffffffff
[ 30.265813] x20: 0000000000000cc1 x19: 0000000000000000 x18: 0000000000000000
[ 30.272960] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 30.280101] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000
ersion : 5.16.0
Capabilities [ 30.287247] x11: ffff80001231d000 x10:
ffff00000b9ec33a x9 : ffff00000b9ec32a
[ 30.297242] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000cc0
[ 30.304385] x5 : 00000000bfffffff x4 : ffff00000a72f000 x3 : 0000000000000000
[ 30.311529] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000cc1
[ 30.318676] Call trace:
[ 30.321124] __alloc_pages+0x5b4/0xbe0
[ 30.324880] __dma_direct_alloc_pages+0x17c/0x1e0
[ 30.329588] dma_direct_alloc+0x70/0x310
[ 30.333514] dma_alloc_attrs+0x7c/0xe4
[ 30.337266] hantro_hevc_get_ref_buf+0x15c/0x184 [hantro_vpu]
[ 30.343038] hantro_g2_hevc_dec_run+0x3b8/0x1910 [hantro_vpu]
[ 30.348805] device_run+0xac/0x110 [hantro_vpu]
[ 30.353354] v4l2_m2m_try_run+0x84/0x134 [v4l2_mem2mem]
[ 30.358603] v4l2_m2m_ioctl_streamon+0x84/0xa0 [v4l2_mem2mem]
[ 30.364368] v4l_streamon+0x28/0x34 [videodev]
[ 30.368874] __video_do_ioctl+0x178/0x3dc [videodev]
[ 30.373889] video_usercopy+0x368/0x6dc [videodev]
[ 30.378734] video_ioctl2+0x1c/0x30 [videodev]
[ 30.383230] v4l2_ioctl+0x44/0x64 [videodev]
[ 30.387554] __arm64_sys_ioctl+0xac/0xf0
[ 30.391482] invoke_syscall+0x48/0x114
[ 30.395238] el0_svc_common.constprop.0+0xd4/0xfc
[ 30.399947] do_el0_svc+0x2c/0x94
[ 30.403264] el0_svc+0x28/0x80
[ 30.406327] el0t_64_sync_handler+0xa8/0x130
[ 30.410603] el0t_64_sync+0x1a0/0x1a4
[ 30.414272] ---[ end trace 878112336a378214 ]---
I was hoping someone might have some suggestions on something to try..
thanks,
adam
> Signed-off-by: Adam Ford <aford173@...il.com>
> ---
> drivers/staging/media/hantro/hantro_drv.c | 2 +
> drivers/staging/media/hantro/hantro_hw.h | 2 +
> drivers/staging/media/hantro/imx8m_vpu_hw.c | 60 +++++++++++++++++++++
> 3 files changed, 64 insertions(+)
>
> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> index fb82b9297a2b..2aa1c520be50 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -592,6 +592,8 @@ static const struct of_device_id of_hantro_match[] = {
> { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
> #endif
> #ifdef CONFIG_VIDEO_HANTRO_IMX8M
> + { .compatible = "nxp,imx8mm-vpu", .data = &imx8mm_vpu_variant, },
> + { .compatible = "nxp,imx8mm-vpu-g2", .data = &imx8mm_vpu_g2_variant },
> { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
> { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
> #endif
> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> index 267a6d33a47b..ae7c3fff760c 100644
> --- a/drivers/staging/media/hantro/hantro_hw.h
> +++ b/drivers/staging/media/hantro/hantro_hw.h
> @@ -211,6 +211,8 @@ enum hantro_enc_fmt {
> ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
> };
>
> +extern const struct hantro_variant imx8mm_vpu_g2_variant;
> +extern const struct hantro_variant imx8mm_vpu_variant;
> extern const struct hantro_variant imx8mq_vpu_g2_variant;
> extern const struct hantro_variant imx8mq_vpu_variant;
> extern const struct hantro_variant px30_vpu_variant;
> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> index ea919bfb9891..c819609d14d1 100644
> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> @@ -242,6 +242,32 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
> },
> };
>
> +static const struct hantro_codec_ops imx8mm_vpu_codec_ops[] = {
> + [HANTRO_MODE_MPEG2_DEC] = {
> + .run = hantro_g1_mpeg2_dec_run,
> + .init = hantro_mpeg2_dec_init,
> + .exit = hantro_mpeg2_dec_exit,
> + },
> + [HANTRO_MODE_VP8_DEC] = {
> + .run = hantro_g1_vp8_dec_run,
> + .init = hantro_vp8_dec_init,
> + .exit = hantro_vp8_dec_exit,
> + },
> + [HANTRO_MODE_H264_DEC] = {
> + .run = hantro_g1_h264_dec_run,
> + .init = hantro_h264_dec_init,
> + .exit = hantro_h264_dec_exit,
> + },
> +};
> +
> +static const struct hantro_codec_ops imx8mm_vpu_g2_codec_ops[] = {
> + [HANTRO_MODE_HEVC_DEC] = {
> + .run = hantro_g2_hevc_dec_run,
> + .init = hantro_hevc_dec_init,
> + .exit = hantro_hevc_dec_exit,
> + },
> +};
> +
> /*
> * VPU variants.
> */
> @@ -257,6 +283,11 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
> static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
> static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>
> +static const char * const imx8mm_g1_clk_names[] = { "g1", "bus" };
> +static const char * const imx8mm_g1_reg_names[] = { "g1" };
> +static const char * const imx8mm_g2_clk_names[] = { "g2", "bus" };
> +static const char * const imx8mm_g2_reg_names[] = { "g2" };
> +
> const struct hantro_variant imx8mq_vpu_variant = {
> .dec_fmts = imx8m_vpu_dec_fmts,
> .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
> @@ -289,3 +320,32 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
> .clk_names = imx8mq_clk_names,
> .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
> };
> +
> +const struct hantro_variant imx8mm_vpu_variant = {
> + .dec_fmts = imx8m_vpu_dec_fmts,
> + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
> + .postproc_fmts = imx8m_vpu_postproc_fmts,
> + .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
> + .postproc_regs = &hantro_g1_postproc_regs,
> + .codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
> + HANTRO_H264_DECODER,
> + .codec_ops = imx8mm_vpu_codec_ops,
> + .irqs = imx8mq_irqs,
> + .num_irqs = ARRAY_SIZE(imx8mq_irqs),
> + .clk_names = imx8mm_g1_clk_names,
> + .num_clocks = ARRAY_SIZE(imx8mm_g1_clk_names),
> + .reg_names = imx8mm_g1_reg_names,
> + .num_regs = ARRAY_SIZE(imx8mm_g1_reg_names)
> +};
> +
> +const struct hantro_variant imx8mm_vpu_g2_variant = {
> + .dec_offset = 0x0,
> + .dec_fmts = imx8m_vpu_g2_dec_fmts,
> + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts),
> + .codec = HANTRO_HEVC_DECODER,
> + .codec_ops = imx8mm_vpu_g2_codec_ops,
> + .irqs = imx8mq_g2_irqs,
> + .num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
> + .clk_names = imx8mm_g2_clk_names,
> + .num_clocks = ARRAY_SIZE(imx8mm_g2_reg_names),
> +};
> --
> 2.32.0
>
Powered by blists - more mailing lists