| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211121232741.6967-7-semen.protsenko@linaro.org>
Date: Mon, 22 Nov 2021 01:27:41 +0200
From: Sam Protsenko <semen.protsenko@...aro.org>
To: Sylwester Nawrocki <s.nawrocki@...sung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>
Cc: David Virag <virag.david003@...il.com>,
Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH 6/6] clk: samsung: exynos850: Keep some crucial clocks running
Some clocks shouldn't be automatically disabled in clk_disable_unused(),
otherwise kernel hangs. Mark those clocks with:
- CLK_IS_CRITICAL flag, when there won't be any consumers for that
clock, but system can't function when it's gated
- CLK_IGNORE_UNUSED flag, when consumer driver will be probably added
later
That makes it possible to run the kernel without passing the
"clk_ignore_unused" param.
Next clocks were modified:
- "gout_dpu_cmu_dpu_pclk": CLK_IGNORE_UNUSED
Will be enabled later in DSIM driver (Display Serial Interface
Master).
- "gout_gpio_peri_pclk": CLK_IGNORE_UNUSED
"gout_gpio_cmgp_pclk": CLK_IGNORE_UNUSED
"gout_gpio_hsi_pclk": CLK_IGNORE_UNUSED
Should be probably enabled in corresponding GPIO driver later, or
made CLK_IS_CRITICAL. "gout_gpio_peri_clk" is actually used by LEDs
on Exynos850-based dev board, so kernel hangs if this clock is not
running. Other clocks were marked as "ignore unused" to prevent
similar issues for other use cases or boards that might be added
later.
- "gout_cci_aclk": CLK_IS_CRITICAL
CCI (Cache Coherent Interconnect): obviously is critical.
- "gout_gic_clk": CLK_IS_CRITICAL
GIC (Generic Interrupt Controller): obviously is critical.
Signed-off-by: Sam Protsenko <semen.protsenko@...aro.org>
---
drivers/clk/samsung/clk-exynos850.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
index 1d257bca8b37..c885ffb1aa24 100644
--- a/drivers/clk/samsung/clk-exynos850.c
+++ b/drivers/clk/samsung/clk-exynos850.c
@@ -596,9 +596,10 @@ static const struct samsung_gate_clock cmgp_gate_clks[] __initconst = {
GATE(CLK_GOUT_CMGP_ADC_S1_PCLK, "gout_adc_s1_pclk",
"gout_clkcmu_cmgp_bus",
CLK_CON_GAT_GOUT_CMGP_ADC_PCLK_S1, 21, 0, 0),
+ /* TODO: Should be enabled in GPIO driver (or made CLK_IS_CRITICAL) */
GATE(CLK_GOUT_CMGP_GPIO_PCLK, "gout_gpio_cmgp_pclk",
"gout_clkcmu_cmgp_bus",
- CLK_CON_GAT_GOUT_CMGP_GPIO_PCLK, 21, 0, 0),
+ CLK_CON_GAT_GOUT_CMGP_GPIO_PCLK, 21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_CMGP_USI0_IPCLK, "gout_cmgp_usi0_ipclk", "dout_cmgp_usi0",
CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK, 21, 0, 0),
GATE(CLK_GOUT_CMGP_USI0_PCLK, "gout_cmgp_usi0_pclk",
@@ -685,8 +686,9 @@ static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50, 21, 0, 0),
GATE(CLK_GOUT_USB_PHY_REF_CLK, "gout_usb_phy_ref", "oscclk",
CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26, 21, 0, 0),
+ /* TODO: Should be enabled in GPIO driver (or made CLK_IS_CRITICAL) */
GATE(CLK_GOUT_GPIO_HSI_PCLK, "gout_gpio_hsi_pclk", "mout_hsi_bus_user",
- CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK, 21, 0, 0),
+ CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK, 21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_MMC_CARD_ACLK, "gout_mmc_card_aclk", "mout_hsi_bus_user",
CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK, 21, 0, 0),
GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
@@ -869,9 +871,10 @@ static const struct samsung_gate_clock peri_gate_clks[] __initconst = {
CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK, 21, 0, 0),
GATE(CLK_GOUT_WDT1_PCLK, "gout_wdt1_pclk", "mout_peri_bus_user",
CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK, 21, 0, 0),
+ /* TODO: Should be enabled in GPIO driver (or made CLK_IS_CRITICAL) */
GATE(CLK_GOUT_GPIO_PERI_PCLK, "gout_gpio_peri_pclk",
"mout_peri_bus_user",
- CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK, 21, 0, 0),
+ CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK, 21, CLK_IGNORE_UNUSED, 0),
};
static const struct samsung_cmu_info peri_cmu_info __initconst = {
@@ -954,10 +957,12 @@ static const struct samsung_div_clock core_div_clks[] __initconst = {
};
static const struct samsung_gate_clock core_gate_clks[] __initconst = {
+ /* CCI (interconnect) clock must be always running */
GATE(CLK_GOUT_CCI_ACLK, "gout_cci_aclk", "mout_core_cci_user",
- CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK, 21, 0, 0),
+ CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK, 21, CLK_IS_CRITICAL, 0),
+ /* GIC (interrupt controller) clock must be always running */
GATE(CLK_GOUT_GIC_CLK, "gout_gic_clk", "mout_core_gic",
- CLK_CON_GAT_GOUT_CORE_GIC_CLK, 21, 0, 0),
+ CLK_CON_GAT_GOUT_CORE_GIC_CLK, 21, CLK_IS_CRITICAL, 0),
GATE(CLK_GOUT_MMC_EMBD_ACLK, "gout_mmc_embd_aclk", "dout_core_busp",
CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK, 21, 0, 0),
GATE(CLK_GOUT_MMC_EMBD_SDCLKIN, "gout_mmc_embd_sdclkin",
@@ -1023,8 +1028,10 @@ static const struct samsung_div_clock dpu_div_clks[] __initconst = {
};
static const struct samsung_gate_clock dpu_gate_clks[] __initconst = {
+ /* TODO: Should be enabled in DSIM driver */
GATE(CLK_GOUT_DPU_CMU_DPU_PCLK, "gout_dpu_cmu_dpu_pclk",
- "dout_dpu_busp", CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK, 21, 0, 0),
+ "dout_dpu_busp",
+ CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK, 21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_DPU_DECON0_ACLK, "gout_dpu_decon0_aclk", "mout_dpu_user",
CLK_CON_GAT_GOUT_DPU_ACLK_DECON0, 21, 0, 0),
GATE(CLK_GOUT_DPU_DMA_ACLK, "gout_dpu_dma_aclk", "mout_dpu_user",
--
2.30.2
Powered by blists - more mailing lists