Date:   Sun, 21 Nov 2021 21:38:54 -0800
From:   Tanmay Shah <tanmay.shah@...inx.com>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Mathieu Poirier <mathieu.poirier@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Michal Simek <michal.simek@...inx.com>
CC:     Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Ben Levinsky <ben.levinsky@...inx.com>,
        Bill Mills <bill.mills@...aro.org>,
        Sergei Korneichuk <sergei.korneichuk@...inx.com>,
        Tanmay Shah <tanmay.shah@...inx.com>,
        <linux-remoteproc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 4/6] firmware: xilinx: Add shutdown/wakeup APIs

From: Ben Levinsky <ben.levinsky@...inx.com>

Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.

Note alignment of args matches convention of other fn's in this file.
The reason being that the long fn name results in aligned args that
otherwise go over 80 chars so shift right to avoid this

Signed-off-by: Ben Levinsky <ben.levinsky@...inx.com>
Signed-off-by: Tanmay Shah <tanmay.shah@...inx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 35 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index a3cadbaf3cba..e772404235c1 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -990,6 +990,41 @@ int zynqmp_pm_release_node(const u32 node)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);

+/**
+ * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
+ *             be powered down forcefully
+ * @node:  Node ID of the targeted PU or subsystem
+ * @ack:   Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_pwrdwn(const u32 node,
+                          const enum zynqmp_pm_request_ack ack)
+{
+       return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn);
+
+/**
+ * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem
+ * @node:  Node ID of the master or subsystem
+ * @set_addr:  Specifies whether the address argument is relevant
+ * @address:   Address from which to resume when woken up
+ * @ack:   Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wake(const u32 node,
+                          const bool set_addr,
+                          const u64 address,
+                          const enum zynqmp_pm_request_ack ack)
+{
+       /* set_addr flag is encoded into 1st bit of address */
+       return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+                                  address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake);
+
 /**
  * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
  * @node:              Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 92bf3ae20524..5da3d490e80e 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -12,6 +12,7 @@

 #ifndef __FIRMWARE_ZYNQMP_H__
 #define __FIRMWARE_ZYNQMP_H__
+#include <linux/types.h>

 #include <linux/err.h>

@@ -66,6 +67,8 @@

 enum pm_api_id {
        PM_GET_API_VERSION = 1,
+       PM_FORCE_POWERDOWN = 8,
+       PM_REQUEST_WAKEUP = 10,
        PM_SYSTEM_SHUTDOWN = 12,
        PM_REQUEST_NODE = 13,
        PM_RELEASE_NODE = 14,
@@ -435,6 +438,12 @@ int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
 int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
                                 u32 value);
 int zynqmp_pm_load_pdi(const u32 src, const u64 address);
+int zynqmp_pm_force_pwrdwn(const u32 target,
+                          const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wake(const u32 node,
+                          const bool set_addr,
+                          const u64 address,
+                          const enum zynqmp_pm_request_ack ack);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -620,6 +629,12 @@ static inline int zynqmp_pm_pinctrl_request(const u32 pin)
        return -ENODEV;
 }

+static inline int zynqmp_pm_force_pwrdwn(const u32 target,
+                                        const enum zynqmp_pm_request_ack ack)
+{
+       return -ENODEV;
+}
+
 static inline int zynqmp_pm_pinctrl_release(const u32 pin)
 {
        return -ENODEV;
@@ -651,6 +666,14 @@ static inline int zynqmp_pm_load_pdi(const u32 src, const u64 address)
 {
        return -ENODEV;
 }
+
+static inline int zynqmp_pm_request_wake(const u32 node,
+                                        const bool set_addr,
+                                        const u64 address,
+                                        const enum zynqmp_pm_request_ack ack)
+{
+       return -ENODEV;
+}
 #endif

 #endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.25.1

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

Powered by blists - more mailing lists