[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211122103617.3496-1-kuohsiang_chou@aspeedtech.com>
Date: Mon, 22 Nov 2021 18:36:17 +0800
From: KuoHsiang Chou <kuohsiang_chou@...eedtech.com>
To: <tzimmermann@...e.de>, <dri-devel@...ts.freedesktop.org>,
<linux-kernel@...r.kernel.org>
CC: <airlied@...hat.com>, <airlied@...ux.ie>, <daniel@...ll.ch>,
<jenmin_yuan@...eedtech.com>, <kuohsiang_chou@...eedtech.com>,
<arc_sung@...eedtech.com>, <tommy_huang@...eedtech.com>,
<brandon_chen@...eedtech.com>, <hungju_huang@...eedtech.com>,
<luke_chen@...eedtech.com>
Subject: [PATCH] drm/ast: Create the driver for ASPEED proprietory Display-Port
1. The MCU FW controling ASPEED DP is loaded by BMC boot loader.
2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP,
and CRD1[5] has been asserted by BMVC boot loader.
3. EDID is prioritized by DP monitor.
4. DP's EDID has high priority to decide resolution supporting.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@...eedtech.com>
---
drivers/gpu/drm/ast/Makefile | 2 +-
drivers/gpu/drm/ast/ast_dp.c | 286 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/ast/ast_drv.h | 13 ++
drivers/gpu/drm/ast/ast_main.c | 7 +-
drivers/gpu/drm/ast/ast_mode.c | 50 +++++-
drivers/gpu/drm/ast/ast_post.c | 4 +-
6 files changed, 353 insertions(+), 9 deletions(-)
create mode 100644 drivers/gpu/drm/ast/ast_dp.c
diff --git a/drivers/gpu/drm/ast/Makefile b/drivers/gpu/drm/ast/Makefile
index 438a2d05b..9bd0756e0 100644
--- a/drivers/gpu/drm/ast/Makefile
+++ b/drivers/gpu/drm/ast/Makefile
@@ -3,6 +3,6 @@
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
-ast-y := ast_drv.o ast_main.o ast_mm.o ast_mode.o ast_post.o ast_dp501.o
+ast-y := ast_drv.o ast_main.o ast_mm.o ast_mode.o ast_post.o ast_dp501.o ast_dp.o
obj-$(CONFIG_DRM_AST) := ast.o
diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c
new file mode 100644
index 000000000..537eaf4fa
--- /dev/null
+++ b/drivers/gpu/drm/ast/ast_dp.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2012 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ */
+/*
+ * Authors: KuoHsiang Chou <kuohsiang_chou@...eedtech.com>
+ */
+
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <drm/drm_print.h>
+#include "ast_drv.h"
+
+bool ast_dp_read_edid(struct drm_device *dev, u8 *ediddata)
+{
+ struct ast_private *ast = to_ast_private(dev);
+ u8 i = 0, j = 0;
+
+#ifdef DPControlPower
+ u8 bDPState_Change = false;
+
+ // Check DP power off or not.
+ if (ast->ASTDP_State & 0x10) {
+ // DP power on
+ ast_dp_PowerOnOff(dev, 1);
+ bDPState_Change = true;
+ }
+#endif
+
+ /*
+ * CRD1[b5]: DP MCU FW is executing
+ * CRDC[b0]: DP link success
+ * CRDF[b0]: DP HPD
+ * CRE5[b0]: Host reading EDID process is done
+ */
+ if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x20) &&
+ ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, 0x01) &&
+ ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x01) &&
+ ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x01))) {
+#ifdef DPControlPower
+ // Set back power off
+ if (bDPState_Change)
+ ast_dp_PowerOnOff(dev, 0);
+#endif
+ return false;
+ }
+
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x00);
+
+ for (i = 0; i < 32; i++) {
+ /*
+ * CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64
+ */
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE4, 0x00, (u8) i);
+ j = 0;
+
+ /*
+ * CRD7[b0]: valid flag for EDID
+ * CRD6[b0]: mirror read pointer for EDID
+ */
+ while ((ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD7, 0x01) != 0x01) ||
+ (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD6, 0xFF) != i)) {
+ mdelay(j+1);
+
+ if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x20) &&
+ ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, 0x01) &&
+ ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x01))) {
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x01);
+ return false;
+ }
+
+ j++;
+ if (j > 200) {
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x01);
+ return false;
+ }
+ }
+
+ *(ediddata) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD8, 0xFF);
+ *(ediddata + 1) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD9, 0xFF);
+ *(ediddata + 2) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDA, 0xFF);
+ *(ediddata + 3) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDB, 0xFF);
+
+ if (i == 31) {
+ *(ediddata + 3) = *(ediddata + 3) + *(ediddata + 2);
+ *(ediddata + 2) = 0;
+ }
+
+ ediddata += 4;
+ }
+
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x01);
+
+#ifdef DPControlPower
+ // Set back power off
+ if (bDPState_Change)
+ ast_dp_PowerOnOff(dev, 0);
+#endif
+
+ return true;
+}
+
+/*
+ * Launch Aspeed DP
+ */
+bool ast_dp_launch(struct drm_device *dev, u8 bPower)
+{
+ u32 i = 0, j = 0, WaitCount = 1;
+ u8 bDPTX = 0;
+ u8 bDPExecute = 1;
+
+ struct ast_private *ast = to_ast_private(dev);
+ // S3 come back, need more time to wait BMC ready.
+ if (bPower)
+ WaitCount = 300;
+
+ // Fill
+ ast->tx_chip_type = AST_TX_NONE;
+
+ // Wait total count by different condition.
+ // This is a temp solution for DP check
+ for (j = 0; j < WaitCount; j++) {
+ bDPTX = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x0E);
+
+ if (bDPTX)
+ break;
+
+ msleep(100);
+ }
+
+ // 0xE : ASTDP with DPMCU FW handling
+ if (bDPTX == 0x0E) {
+ // Wait one second then timeout.
+ i = 0;
+
+ while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x20) != 0x20) {
+ i++;
+ // wait 100 ms
+ msleep(100);
+
+ if (i >= 10) {
+ // DP would not be ready.
+ bDPExecute = 0;
+ break;
+ }
+ };
+
+ if (bDPExecute)
+ ast->tx_chip_type = AST_TX_ASTDP;
+ }
+
+ return true;
+}
+
+#ifdef DPControlPower
+
+void ast_dp_PowerOnOff(struct drm_device *dev, u8 Mode)
+{
+ struct ast_private *ast = to_ast_private(dev);
+ // Read and Turn off DP PHY sleep
+ u8 bE3 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, 0x0F);
+
+ // Turn on DP PHY sleep
+ if (!Mode)
+ bE3 |= 0x10;
+
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, 0x00, bE3); // DP Power on/off
+
+ // Save ASTDP power state
+ ast->ASTDP_State = bE3;
+}
+
+#endif
+
+void ast_dp_SetOnOff(struct drm_device *dev, u8 Mode)
+{
+ struct ast_private *ast = to_ast_private(dev);
+
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, 0x00, Mode); // video on/off
+
+ // Save ASTDP power state
+ ast->ASTDP_State = Mode;
+
+ // If DP plug in and link successful then check video on / off status
+ if (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, 0x01) &&
+ ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x01)) {
+ Mode <<= 4;
+ while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x10) != Mode) {
+ // wait 1 ms
+ mdelay(1);
+ }
+ }
+}
+
+void ast_dp_SetOutput(struct drm_crtc *crtc, struct ast_vbios_mode_info *vbios_mode)
+{
+ struct ast_private *ast = to_ast_private(crtc->dev);
+
+ u32 ulRefreshRateIndex;
+ u8 ModeIdx;
+
+ ulRefreshRateIndex = vbios_mode->enh_table->refresh_rate_index - 1;
+
+ switch (crtc->mode.crtc_hdisplay) {
+ case 320:
+ ModeIdx = 0x11;
+ break;
+ case 400:
+ ModeIdx = 0x12;
+ break;
+ case 512:
+ ModeIdx = 0x13;
+ break;
+ case 640:
+ ModeIdx = (0x00 + (u8) ulRefreshRateIndex);
+ break;
+ case 800:
+ ModeIdx = (0x04 + (u8) ulRefreshRateIndex);
+ break;
+ case 1024:
+ ModeIdx = (0x09 + (u8) ulRefreshRateIndex);
+ break;
+ case 1152:
+ ModeIdx = 0x1F;
+ break;
+ case 1280:
+ if (crtc->mode.crtc_vdisplay == 800)
+ ModeIdx = (0x17 - (u8) ulRefreshRateIndex); // For RB/Non-RB
+ else // 1024
+ ModeIdx = (0x0D + (u8) ulRefreshRateIndex);
+ break;
+ case 1360:
+ case 1366:
+ ModeIdx = 0x1E;
+ break;
+ case 1440:
+ ModeIdx = (0x19 - (u8) ulRefreshRateIndex); // For RB/Non-RB
+ break;
+ case 1600:
+ if (crtc->mode.crtc_vdisplay == 900)
+ ModeIdx = (0x1D - (u8) ulRefreshRateIndex); // For RB/Non-RB
+ else //1200
+ ModeIdx = 0x10;
+ break;
+ case 1680:
+ ModeIdx = (0x1B - (u8) ulRefreshRateIndex); // For RB/Non-RB
+ break;
+ case 1920:
+ if (crtc->mode.crtc_vdisplay == 1080)
+ ModeIdx = 0x15;
+ else //1200
+ ModeIdx = 0x14;
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * CRE0[7:0]: MISC0 ((0x00: 18-bpp) or (0x20: 24-bpp)
+ * CRE1[7:0]: MISC1 (default: 0x00)
+ * CRE2[7:0]: video format index (0x00 ~ 0x20 or 0x40 ~ 0x50)
+ */
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE0, 0x00, 0x20);
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE1, 0x00, 0x00);
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE2, 0x00, ModeIdx);
+}
diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h
index 2cfce7dc9..e56d5d57b 100644
--- a/drivers/gpu/drm/ast/ast_drv.h
+++ b/drivers/gpu/drm/ast/ast_drv.h
@@ -71,6 +71,7 @@ enum ast_tx_chip {
AST_TX_SIL164,
AST_TX_ITE66121,
AST_TX_DP501,
+ AST_TX_ASTDP,
};
#define AST_DRAM_512Mx16 0
@@ -175,6 +176,9 @@ struct ast_private {
u8 dp501_maxclk;
u8 *dp501_fw_addr;
const struct firmware *dp501_fw; /* dp501 fw */
+
+ // ASTDP
+ u8 ASTDP_State;
};
static inline struct ast_private *to_ast_private(struct drm_device *dev)
@@ -356,5 +360,14 @@ bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size);
bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata);
u8 ast_get_dp501_max_clk(struct drm_device *dev);
void ast_init_3rdtx(struct drm_device *dev);
+/* aspeed DP */
+#define DPControlPower
+bool ast_dp_read_edid(struct drm_device *dev, u8 *ediddata);
+bool ast_dp_launch(struct drm_device *dev, u8 bPower);
+#ifdef DPControlPower
+void ast_dp_PowerOnOff(struct drm_device *dev, u8 Mode);
+#endif
+void ast_dp_SetOnOff(struct drm_device *dev, u8 Mode);
+void ast_dp_SetOutput(struct drm_crtc *crtc, struct ast_vbios_mode_info *vbios_mode);
#endif
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index 79a361867..de5d69888 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -212,7 +212,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
}
break;
}
-
+ ast->support_wide_screen = true;
/* Check 3rd Tx option (digital output afaik) */
ast->tx_chip_type = AST_TX_NONE;
@@ -230,7 +230,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
ast->tx_chip_type = AST_TX_SIL164;
}
- if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
+ if ((ast->chip == AST2300) || (ast->chip == AST2400) || (ast->chip == AST2500)) {
/*
* On AST2300 and 2400, look the configuration set by the SoC in
* the SOC scratch register #1 bits 11:8 (interestingly marked
@@ -254,7 +254,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
case 0x0c:
ast->tx_chip_type = AST_TX_DP501;
}
- }
+ } else if (ast->chip == AST2600)
+ ast_dp_launch(&ast->base, 0);
/* Print stuff for diagnostic purposes */
switch(ast->tx_chip_type) {
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 6bfaefa01..d7347d510 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -987,20 +987,44 @@ static int ast_cursor_plane_init(struct ast_private *ast)
static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct ast_private *ast = to_ast_private(crtc->dev);
+ u8 ch = 0x03;
/* TODO: Maybe control display signal generation with
* Sync Enable (bit CR17.7).
*/
switch (mode) {
case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
+ ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, 0);
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xfc, 0);
if (ast->tx_chip_type == AST_TX_DP501)
ast_set_dp501_video_output(crtc->dev, 1);
+
+ if (ast->tx_chip_type == AST_TX_ASTDP) {
+#ifdef DPControlPower
+ ast_dp_PowerOnOff(crtc->dev, 1);
+#endif
+ ast_wait_for_vretrace(ast);
+ ast_dp_SetOnOff(crtc->dev, 1);
+ }
+
+ ast_crtc_load_lut(ast, crtc);
break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
+ ch = mode;
if (ast->tx_chip_type == AST_TX_DP501)
ast_set_dp501_video_output(crtc->dev, 0);
+
+ if (ast->tx_chip_type == AST_TX_ASTDP) {
+ ast_dp_SetOnOff(crtc->dev, 0);
+#ifdef DPControlPower
+ ast_dp_PowerOnOff(crtc->dev, 0);
+#endif
+ }
+
+ ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, 0x20);
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xfc, ch);
break;
}
}
@@ -1044,6 +1068,8 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc,
struct ast_private *ast = to_ast_private(crtc->dev);
struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state);
struct ast_crtc_state *old_ast_crtc_state = to_ast_crtc_state(old_crtc_state);
+struct ast_vbios_mode_info *vbios_mode_info =
+ &ast_crtc_state->vbios_mode_info;
/*
* The gamma LUT has to be reloaded after changing the primary
@@ -1051,6 +1077,10 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc,
*/
if (old_ast_crtc_state->format != ast_crtc_state->format)
ast_crtc_load_lut(ast, crtc);
+
+ //Set Aspeed Display-Port
+ if (ast->tx_chip_type == AST_TX_ASTDP)
+ ast_dp_SetOutput(crtc, vbios_mode_info);
}
static void
@@ -1225,7 +1255,16 @@ static int ast_get_modes(struct drm_connector *connector)
ast->dp501_maxclk = ast_get_dp501_max_clk(connector->dev);
else
kfree(edid);
+ } else if (ast->tx_chip_type == AST_TX_ASTDP) {
+ edid = kmalloc(128, GFP_KERNEL);
+ if (!edid)
+ return -ENOMEM;
+
+ flags = ast_dp_read_edid(connector->dev, (u8 *)edid);
+ if (!flags)
+ kfree(edid);
}
+
if (!flags)
edid = drm_get_edid(connector, &ast_connector->i2c->adapter);
if (edid) {
@@ -1256,10 +1295,12 @@ static enum drm_mode_status ast_mode_valid(struct drm_connector *connector,
return MODE_OK;
if ((mode->hdisplay == 1600) && (mode->vdisplay == 900))
return MODE_OK;
+ if ((mode->hdisplay == 1152) && (mode->vdisplay == 864))
+ return MODE_OK;
if ((ast->chip == AST2100) || (ast->chip == AST2200) ||
(ast->chip == AST2300) || (ast->chip == AST2400) ||
- (ast->chip == AST2500)) {
+ (ast->chip == AST2500) || (ast->chip == AST2600)) {
if ((mode->hdisplay == 1920) && (mode->vdisplay == 1080))
return MODE_OK;
@@ -1400,7 +1441,8 @@ int ast_mode_config_init(struct ast_private *ast)
ast->chip == AST2200 ||
ast->chip == AST2300 ||
ast->chip == AST2400 ||
- ast->chip == AST2500) {
+ ast->chip == AST2500 ||
+ ast->chip == AST2600) {
dev->mode_config.max_width = 1920;
dev->mode_config.max_height = 2048;
} else {
diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
index b5d92f652..0aa9cf0fb 100644
--- a/drivers/gpu/drm/ast/ast_post.c
+++ b/drivers/gpu/drm/ast/ast_post.c
@@ -379,7 +379,9 @@ void ast_post_gpu(struct drm_device *dev)
ast_enable_mmio(dev);
ast_set_def_ext_reg(dev);
- if (ast->config_mode == ast_use_p2a) {
+ if (ast->chip == AST2600) {
+ ast_dp_launch(dev, 1);
+ } else if (ast->config_mode == ast_use_p2a) {
if (ast->chip == AST2500)
ast_post_chip_2500(dev);
else if (ast->chip == AST2300 || ast->chip == AST2400)
--
2.27.0
Powered by blists - more mailing lists