linux-kernel - [PATCH RFC v2 0/4] MUX: Add support for reading enable state from DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 22 Nov 2021 18:26:20 +0530
From:   Aswath Govindraju <a-govindraju@...com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Aswath Govindraju <a-govindraju@...com>,
        Peter Rosin <peda@...ntia.se>,
        Rob Herring <robh+dt@...nel.org>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-can@...r.kernel.org>,
        <linux-phy@...ts.infradead.org>
Subject: [PATCH RFC v2 0/4] MUX: Add support for reading enable state from DT

- The following series of patches add support for reading the state of the
  mux to be set for enabling given device.
- As these are RFC patches I have combined them into a single series for
  better understanding of the reason behind making this change.

Changes since v1:
- Added support for reading the enable state from DT instead of hardcoding
  the state to be set to 1.
- Made relavent changes in the bindings

Link to v1,
- https://patchwork.kernel.org/project/linux-phy/list/?series=578863&state=*

Aswath Govindraju (4):
  dt-bindings: mux: Increase the number of arguments in mux-controls
  dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
  mux: Add support for reading mux enable state from DT
  phy: phy-can-transceiver: Add support for setting mux

 .../devicetree/bindings/mux/gpio-mux.yaml     |  2 +-
 .../bindings/mux/mux-controller.yaml          |  2 +-
 .../bindings/phy/ti,tcan104x-can.yaml         |  8 ++++++
 drivers/mux/core.c                            | 20 ++++++++++++--
 drivers/phy/phy-can-transceiver.c             | 26 +++++++++++++++++++
 include/linux/mux/consumer.h                  |  1 +
 include/linux/mux/driver.h                    |  1 +
 7 files changed, 56 insertions(+), 4 deletions(-)

-- 
2.17.1