linux-kernel - [PATCH v2 2/3] serial: 8250_pericom: Re-enable higher baud rates

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211122133512.8947-3-andriy.shevchenko@linux.intel.com>
Date:   Mon, 22 Nov 2021 15:35:11 +0200
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Cc:     Jiri Slaby <jirislaby@...nel.org>,
        Jay Dolan <jay.dolan@...esio.com>
Subject: [PATCH v2 2/3] serial: 8250_pericom: Re-enable higher baud rates

From: Jay Dolan <jay.dolan@...esio.com>

Add UPF_MAGIC_MULTIPLIER to the port flags since there is now
range checking in serial8250_get_baud_rate() in 8250_port.c.

Signed-off-by: Jay Dolan <jay.dolan@...esio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 drivers/tty/serial/8250/8250_pericom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
index df27f0daea7a..f0d026325f17 100644
--- a/drivers/tty/serial/8250/8250_pericom.c
+++ b/drivers/tty/serial/8250/8250_pericom.c
@@ -117,7 +117,7 @@ static int pericom8250_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	uart.port.private_data = pericom;
 	uart.port.iotype = UPIO_PORT;
 	uart.port.uartclk = 921600 * 16;
-	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ | UPF_MAGIC_MULTIPLIER;
 	uart.port.set_divisor = pericom_do_set_divisor;
 	for (i = 0; i < nr && i < maxnr; i++) {
 		unsigned int offset = (i == 3 && nr == 4) ? 0x38 : i * 0x8;
-- 
2.33.0