[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1637639009.git.schowdhu@codeaurora.org>
Date: Tue, 23 Nov 2021 09:58:18 +0530
From: Souradeep Chowdhury <schowdhu@...eaurora.org>
To: linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, pure.logic@...us-software.ie,
bjorn.andersson@...aro.org, greg@...ah.com
Cc: linux-kernel@...r.kernel.org, tsoni@...eaurora.org,
psodagud@...eaurora.org, satyap@...eaurora.org,
pheragu@...eaurora.org, rnayak@...eaurora.org,
sibis@...eaurora.org, saiprakash.ranjan@...eaurora.org,
quic_schowdhu@...cinc.com,
Souradeep Chowdhury <schowdhu@...eaurora.org>
Subject: [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver
This is a series of patches that implements a driver for the control
peripheral, EUD (Embedded USB Debugger). The EUD is a mini-USB hub
implemented on chip to support the USB-based debug and trace capabilities.
Apart from debug capabilities, EUD has a control peripheral. Control
Peripheral is on when EUD is on and gets signals like USB attach, pet
EUD etc. EUD driver listens to events like USB attach or detach and then
informs the USB about these events via ROLE-SWITCH. At regular intervals,
the EUD driver receives an interrupt to pet the driver indicating that
the software is functional.
Changes in V1
* EUD has now been mapped as a separate DT node as it is an independent QCOM IP.
* EUD is attached to the connector child of dwc3 via port end point since EUD
driver needs the connector for role-switching,
* EUD driver has been moved now to drivers/soc/qcom/qcom_eud.c.
* All the comments from version 0 of the patch has been implemented.
Souradeep Chowdhury (8):
dt-bindings: Add the yaml bindings for EUD
dt-bindings: connector: Add property for EUD type-C connector
bindings: usb: dwc3: Update dwc3 properties for EUD connector
usb: dwc3: drd: Register the eud connector child node for dwc3
soc: qcom: eud: Add driver support for Embedded USB Debugger(EUD)
arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
arm64: dts: qcom: sc7280: Set the default dr_mode for usb2
MAINTAINERS: Add maintainer entry for EUD
Documentation/ABI/testing/sysfs-driver-eud | 9 +
.../bindings/connector/usb-connector.yaml | 4 +
.../devicetree/bindings/soc/qcom/qcom,eud.yaml | 52 ++++
.../devicetree/bindings/usb/snps,dwc3.yaml | 6 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 ++
drivers/soc/qcom/Kconfig | 10 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_eud.c | 268 +++++++++++++++++++++
drivers/usb/dwc3/drd.c | 26 ++
11 files changed, 413 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-driver-eud
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
create mode 100644 drivers/soc/qcom/qcom_eud.c
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists