| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <df32e0bc-ffc4-5fb3-8979-2be652652e05@quicinc.com>
Date: Tue, 23 Nov 2021 11:13:17 +0530
From: Jishnu Prakash <quic_jprakash@...cinc.com>
To: Jonathan Cameron <jic23@...nel.org>
CC: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<devicetree@...r.kernel.org>, <mka@...omium.org>,
<dmitry.baryshkov@...aro.org>, <robh+dt@...nel.org>,
<knaack.h@....de>, <lars@...afoo.de>, <pmeerw@...erw.net>,
<manivannan.sadhasivam@...aro.org>, <linus.walleij@...aro.org>,
<quic_kgunda@...cinc.com>, <quic_aghayal@...cinc.com>,
<daniel.lezcano@...aro.org>, <rui.zhang@...el.com>,
<quic_subbaram@...cinc.com>, <Jonathan.Cameron@...wei.com>,
<amitk@...nel.org>, "Rafael J. Wysocki" <rafael@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-pm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-msm-owner@...r.kernel.org>, <linux-iio@...r.kernel.org>
Subject: Re: [PATCH V2 1/3] dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM
bindings
Hi Jonathan,
On 10/27/2021 11:21 PM, Jonathan Cameron wrote:
> On Tue, 26 Oct 2021 21:34:33 +0530
> Jishnu Prakash <quic_jprakash@...cinc.com> wrote:
>
>> Add documentation for PMIC5 Gen2 ADC_TM peripheral.
>> It is used for monitoring ADC channel thresholds for PMIC7-type
>> PMICs. It is present on PMK8350, like PMIC7 ADC and can be used
>> to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
>> on a target, through PBS(Programmable Boot Sequence).
>>
>> Signed-off-by: Jishnu Prakash <quic_jprakash@...cinc.com>
> Hi Jishnu,
>
> A few comments inline.
>
> Thanks,
>
> Jonathan
>
>> ---
>> .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 83 +++++++++++++++++++++-
>> 1 file changed, 81 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
>> index 3ea8c0c..71a05a3 100644
>> --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
>> +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
>> @@ -10,7 +10,9 @@ maintainers:
>>
>> properties:
>> compatible:
>> - const: qcom,spmi-adc-tm5
>> + enum:
>> + - qcom,spmi-adc-tm5
>> + - qcom,spmi-adc-tm5-gen2
>>
>> reg:
>> maxItems: 1
>> @@ -33,6 +35,7 @@ properties:
>> qcom,avg-samples:
>> $ref: /schemas/types.yaml#/definitions/uint32
>> description: Number of samples to be used for measurement.
>> + Not applicable for Gen2 ADC_TM peripheral.
> Why not use an matching statement to set
> qcom,avg_samples: false
> for that compatible rather than relying on the fuzzy nature of a coment.
I'll add this condition in the next post.
>
>
>> enum:
>> - 1
>> - 2
>> @@ -45,6 +48,7 @@ properties:
>> $ref: /schemas/types.yaml#/definitions/uint32
>> description: This parameter is used to decrease ADC sampling rate.
>> Quicker measurements can be made by reducing decimation ratio.
>> + Not applicable for Gen2 ADC_TM peripheral.
>> enum:
>> - 250
>> - 420
>> @@ -93,6 +97,29 @@ patternProperties:
>> - const: 1
>> - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
>>
>> + qcom,avg-samples:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description: Number of samples to be used for measurement.
>> + This property in child node is applicable only for Gen2 ADC_TM peripheral.
>> + enum:
>> + - 1
>> + - 2
>> + - 4
>> + - 8
>> + - 16
>> + default: 1
>> +
>> + qcom,decimation:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description: This parameter is used to decrease ADC sampling rate.
>> + Quicker measurements can be made by reducing decimation ratio.
>> + This property in child node is applicable only for Gen2 ADC_TM peripheral.
>> + enum:
>> + - 85
>> + - 340
>> + - 1360
>> + default: 1360
>> +
>> required:
>> - reg
>> - io-channels
>> @@ -124,7 +151,7 @@ examples:
>> #size-cells = <0>;
>> #io-channel-cells = <1>;
>>
>> - /* Other propreties are omitted */
>> + /* Other properties are omitted */
> Should really be a separate patch, but up to Rob.
>
>
>> conn-therm@4f {
>> reg = <ADC5_AMUX_THM3_100K_PU>;
>> qcom,ratiometric;
>> @@ -148,4 +175,56 @@ examples:
>> };
>> };
>> };
>> +
>> + - |
>> + #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
>> + #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> + spmi_bus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pmk8350_vadc: adc@...0 {
>> + reg = <0x3100>;
>> + compatible = "qcom,spmi-adc7";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #io-channel-cells = <1>;
>> +
>> + /* Other properties are omitted */
>> + xo-therm@44 {
>> + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
>> + qcom,ratiometric;
>> + qcom,hw-settle-time = <200>;
>> + };
>> +
>> + conn-therm@47 {
>> + reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
>> + qcom,ratiometric;
>> + qcom,hw-settle-time = <200>;
>> + };
>> + };
>> +
>> + pmk8350_adc_tm: adc-tm@...0 {
>> + compatible = "qcom,spmi-adc-tm5-gen2";
>> + reg = <0x3400>;
>> + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
>> + #thermal-sensor-cells = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pmk8350-xo-therm@0 {
>> + reg = <0>;
>> + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
>> + qcom,ratiometric;
>> + qcom,hw-settle-time-us = <200>;
> Perhaps include the new properties you are defining in the example?
I'll add them in the next post.
>
>> + };
>> +
>> + conn-therm@1 {
>> + reg = <1>;
>> + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>;
>> + qcom,ratiometric;
>> + qcom,hw-settle-time-us = <200>;
>> + };
>> + };
>> + };
>> ...
Thanks,
Jishnu
Powered by blists - more mailing lists