linux-kernel - [PATCH RFC v3 4/4] phy: phy-can-transceiver: Add support for setting mux

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20211123081222.27979-5-a-govindraju@ti.com>
Date:   Tue, 23 Nov 2021 13:42:21 +0530
From:   Aswath Govindraju <a-govindraju@...com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon <nm@...com>,
        Aswath Govindraju <a-govindraju@...com>,
        Peter Rosin <peda@...ntia.se>,
        Rob Herring <robh+dt@...nel.org>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-can@...r.kernel.org>,
        <linux-phy@...ts.infradead.org>
Subject: [PATCH RFC v3 4/4] phy: phy-can-transceiver: Add support for setting mux

On some boards, for routing CAN signals from controller to transceiver,
muxes might need to be set. Therefore, add support for setting the mux by
reading the mux-controls property from the device tree node.

Signed-off-by: Aswath Govindraju <a-govindraju@...com>
---
 drivers/phy/Kconfig               |  1 +
 drivers/phy/phy-can-transceiver.c | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 82b63e60c5a2..300b0f2b5f84 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -64,6 +64,7 @@ config USB_LGM_PHY
 config PHY_CAN_TRANSCEIVER
 	tristate "CAN transceiver PHY"
 	select GENERIC_PHY
+	select MULTIPLEXER
 	help
 	  This option enables support for CAN transceivers as a PHY. This
 	  driver provides function for putting the transceivers in various
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 6f3fe37dee0e..6c94e3846410 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -10,6 +10,7 @@
 #include<linux/module.h>
 #include<linux/gpio.h>
 #include<linux/gpio/consumer.h>
+#include <linux/mux/consumer.h>
 
 struct can_transceiver_data {
 	u32 flags;
@@ -21,13 +22,22 @@ struct can_transceiver_phy {
 	struct phy *generic_phy;
 	struct gpio_desc *standby_gpio;
 	struct gpio_desc *enable_gpio;
+	struct mux_state *mux_state;
 };
 
 /* Power on function */
 static int can_transceiver_phy_power_on(struct phy *phy)
 {
+	int ret;
 	struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
 
+	if (can_transceiver_phy->mux_state) {
+		ret = mux_state_select(can_transceiver_phy->mux_state);
+		if (ret) {
+			dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
+			return ret;
+		}
+	}
 	if (can_transceiver_phy->standby_gpio)
 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
 	if (can_transceiver_phy->enable_gpio)
@@ -45,6 +55,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
 	if (can_transceiver_phy->enable_gpio)
 		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
+	if (can_transceiver_phy->mux_state)
+		mux_state_deselect(can_transceiver_phy->mux_state);
 
 	return 0;
 }
@@ -95,6 +107,16 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
 	match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
 	drvdata = match->data;
 
+	if (of_property_read_bool(dev->of_node, "mux-controls")) {
+		struct mux_state *mux_state;
+
+		mux_state = devm_mux_state_get(dev, NULL);
+		if (IS_ERR(mux_state))
+			return dev_err_probe(&pdev->dev, PTR_ERR(mux_state),
+					     "failed to get mux\n");
+		can_transceiver_phy->mux_state = mux_state;
+	}
+
 	phy = devm_phy_create(dev, dev->of_node,
 			      &can_transceiver_phy_ops);
 	if (IS_ERR(phy)) {
-- 
2.17.1