linux-kernel - Re: [PATCH RFC v2 0/4] MUX: Add support for reading enable state from DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <b9ad641d-e697-fcd7-a113-685d371bb0ba@ti.com>
Date:   Tue, 23 Nov 2021 13:44:23 +0530
From:   Aswath Govindraju <a-govindraju@...com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Peter Rosin <peda@...ntia.se>,
        Rob Herring <robh+dt@...nel.org>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-can@...r.kernel.org>,
        <linux-phy@...ts.infradead.org>
Subject: Re: [PATCH RFC v2 0/4] MUX: Add support for reading enable state from
 DT

Hi All,

On 22/11/21 6:26 pm, Aswath Govindraju wrote:
> - The following series of patches add support for reading the state of the
>   mux to be set for enabling given device.
> - As these are RFC patches I have combined them into a single series for
>   better understanding of the reason behind making this change.
> 
> Changes since v1:
> - Added support for reading the enable state from DT instead of hardcoding
>   the state to be set to 1.
> - Made relavent changes in the bindings
> 
> Link to v1,
> - https://patchwork.kernel.org/project/linux-phy/list/?series=578863&state=*
> 
> Aswath Govindraju (4):
>   dt-bindings: mux: Increase the number of arguments in mux-controls
>   dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
>   mux: Add support for reading mux enable state from DT
>   phy: phy-can-transceiver: Add support for setting mux
> 

Thank you for the comments. I have made changes based on the comments
received and posted a v3 of this series.

Regards,
Aswath

>  .../devicetree/bindings/mux/gpio-mux.yaml     |  2 +-
>  .../bindings/mux/mux-controller.yaml          |  2 +-
>  .../bindings/phy/ti,tcan104x-can.yaml         |  8 ++++++
>  drivers/mux/core.c                            | 20 ++++++++++++--
>  drivers/phy/phy-can-transceiver.c             | 26 +++++++++++++++++++
>  include/linux/mux/consumer.h                  |  1 +
>  include/linux/mux/driver.h                    |  1 +
>  7 files changed, 56 insertions(+), 4 deletions(-)
>